Construction of wall and some minor work carried out for establishment of IDEA lab at Girls hostel mess - VTU Regional center, Kalaburagi.(Exclusively for Schedule Tribe Category) (2nd Call)

Construction of wall and some minor work carried out for establishment of IDEA lab at Girls hostel mess - VTU Regional center, Kalaburagi.(Exclusively for Schedule Tribe Category)

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg per m cube and minimum compressive strength of 4.00 N per mm square ...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, pr...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

PProviding & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead f...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L per 10 m square) over and including priming coat of exterior primer applied at 2.20kg per 10 m squ...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Executive Chair High back chair with seat and back high quality leather touch Rexine Arms with cushioning chair to have SS base with 5 caster wheel legs along with syncro Mechanism etc complete & as p...

Providing , supplying and installation of Task chair of approved make made of medium back having a back finish with adjustable cushioned lumbar support and seat finish black fabric with high density c...

Supplyin office table of size 1500 x 750mm and 750mm high made with of 18mm plywood table to have one side drawer unit of 450mm x 500mm deep x 650mm high with drawers and other side shall have file u...

Supplying of MS table to lab of size 1500mm x 900mm made with of 40 x 40 mm MS Square / rectangular tubes with heavy duty Frames with top 19mm plywood external surface to be finished with 1mm laminate...