COMPREHENSIVE MAINT AND MISC REPAIR TO MAP ACCN AND REPAIR TO FENCING DRAIN SEWAGE IN 108 ER AND 16 FSG ETC UNDER AGE BR II OF GE SUKNA

Amount

Taking down cement plaster on brick or concrete surfaces / ceiling, racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed.

M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish complete all as specified and directed. Make of oil bound distemper :- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints

M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish complete all as specified and directed. Make of oil bound distemper:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints

M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. Make of oil bound distemper:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote)

M&L preparation of old decorated ceiling surface and including applying one coat of oil bound distemper complete all as specified and directed. Make:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote)

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 and dismantling complete all as specified and directed. Make:- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd

All as per Sl item No. 7 above but area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm

M&L coloured glazed ceramic tiles 300 x 200 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 & dismantling complete all as specified and directed. Make :- Kajaria Ceramics Ltd / Asian Granito India Ltd / Somany Ceramics Limited / Varmora Granito Pvt Ltd / H & R Johnson India Ltd / NITCO / Orient Bell Ltd

M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, including demolition complete all as specified and directed.

M&L hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

S&F in repairs pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Prestar.

All as per Sl item No. 12 above but plain steel sheet.

S&F in repairs structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1998 grade St.-240 complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes of capacity 250 litre to 500 litre PVC water storage tank without dismantling the tank and including writing the words "Tank Cleaning done on ____" indicating the date, month & year of cleaning on external surface of tank wall with synthetic enamel paint complete all as specified and directed. Make of synthetic Paint:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes of capacity 1000 litre to 2000 litre PVC water storage tank without dismantling the tank and including writing the words "Tank Cleaning done on ____" indicating the date, month & year of cleaning on external surface of tank wall with synthetic enamel paint complete all as specified and directed. Make of synthetic Paint:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

S&F in repairs rotational moulded polyethylene water storage tanks of 500 Litres capacity, multilayered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. Make of tank:- Sintex / Polycon / Polywell Make of ball valve:- Prayag Cat No. 152 or equivalent in Polytuf

All as per Sl item No. 17 above but 1000 litres capacity

S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and directed. Make:- Prayag Cat No. 152 or equivalent in Polytuf

All as per Sl item No. 19 above but 25 mm bore (minimum weight 455 grams) Make:- Prayag Cat No. 153 or equivalent in Polytuf

S&F in repairs 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. Make - Tata / Jindal Steel / Prakash / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / BST

All as per Sl item No 21 above but 20 mm bore.

M&L cutting chases in brick wall, pinning in. making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc. 10 cm girth complete all as specified and directed.

S&F in repairs vitreous China water closet pan (pedestal pattern) white in colour with fixing bolts and flush pipe, connection to trap and to flushing cistern and all joints, including plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges complete all as specified and directed. Make of Water Closet:- Parryware, Cat No. - C0297 / C0278 (white) equivalent in Cera (Ist quality) / Hindware / Essco Make of Seat cover:- Parryware Cat No - E8071 (white) or equivalent in Hindware / Cera / Essco

S&F in repairs vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, waste coupling and cutting for and pinning in ends of brackets etc, complete all as specified and directed. Make of wash hand basin:- Parryware, Cat No. - C0406 *(SP) (White) or equivalent in Cera (1st quality) / Hindware / Essco Make of waste coupling - Prayag / Polytuf. Make of PVC waste pipe - Prayag / Polytuf

S&F in repairs 15 mm bore bib tap chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. Make:- ESSCO, Cat No. - DLX-511KN or equivalent in Prayag / Gem / Parko

S&F in repairs 100 mm size swivel shower rose of ABS, chromium plated with long head arm for fixing with 15 mm pipe complete all as specified and directed. Make:- ESSCO, Cat No.- EOS-542N or equivalent in Prayag / Gem / Parko

S&F in repairs pillar tap 15 mm bore, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make:- ESSCO, Cat No. - DLX-507KN or equivalent in Prayag / Gem / Parko

S&F in repairs brass chromium plated wall mixer with connecting legs and wall flanges for 15 mm bore pipe complete all as specified and directed. Make:- ESSCO, Cat No. - DLX-520KN or equivalent in Prayag / Gem / Parko

S&F in repairs 15 mm bore fancy type, chromium plated, stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed. Make:- ESSCO, Cat No- DLX-513AKN or equivalent in Prayag / Gem / Parko

S&F in repairs 15 mm bore fancy type, chromium plated, stop valves, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and directed. Make:- ESSCO, Cat No. - DLX-514AKN or equivalent in Prayag / Gem / Parko

S&F in repairs waste fitting 32 mm bore, brass, chromium plated for basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. Make :- Prayag Cat No.- BEA-10 or equivalent in ESSCO / Gem / Parko

S&F in repairs PVC connections 15 mm size with PTMT nuts, of length 450 mm complete all as specified and directed. Make:- Prayag Cat No.- 323-TK or equivalent in Polytuf

S&F in repairs 32 mm bore PVC waste pipe for WHB / Sink etc. complete all as specified and directed. Make:- Prayag Cat No - 327 or equivalent in Polytuf

S&F in repairs health faucet 15 mm bore, ABS chromium plated with & including 1.0 mtr chromium plated flexible tube & wall hook complete all as specified and directed. Make:- ESSCO, Cat No. - ALE-ESS-585 or equivalent in Prayag / Gem / Parko

S&F in repairs plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges for pedestal pan complete all as specified and directed. Make:- Parryware, Cat No - E8071 (white) or equivalent in Hindware / Cera / Essco

S&F in repairs sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 x 420mm bowl size 410 x 330 x 160 mm complete all as specified and directed. Make:- Bluestar / Prayag / Anupam Industries

S&F in repairs PVC tank cover suitable for polyethylene water storage tanks of 500 - 1000 litres capacity and including locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed.

S&F in repairs 32 mm bore waste coupling of PTMT (half or full threaded) (minimum weight 45gms) complete all as specified and directed. Make:- Prayag / Polytuf

M&L cleaning the surfaces of sunken floor using wire brush, brooming down and washing down with water to remove dust etc. and including brushing with neat cement slurry @ 0.5 kg / sqm & one coat with acrylic based polymer modified cementitous composite @ 0.50 kg / sqm complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:3 in sunken portion, using water proofing compound as per manufacturers instructions finished even and fair complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L PCC 1:5:10 type E-2, (using 40 mm graded crushed stone aggregate) as in sunken portion and including demolition complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in sunken portion and including demolition complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets & 32 mm dia PVC flush bend pipe complete all as specified and directed. Make of Cistern:- Parryware, Cat No. - E8055 or Hindware, Model - Sleek Fresh ISI (Starwhite) or equivalent in Cera (1st quality) / Essco Make of Bend Pipe:- Parryware / Cera (1st quality) / Hindware / Essco

M&L 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including demolition complete all as specified and directed.

S&F in repairs 40 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf / cm2 and fixed complete to wall, ceiling or in floors etc complete all as specified and directed. Make:- Supreme / Prince / Kisan

S&F in repairs PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Make:- Supreme / Prince / Kisan Mouldings Limited

All as per Sl item No. 48 above but 110 mm bore.

S&F PVC (SWR) 75 mm bore bend of any radius complete all as specified and directed. Make:- Supreme / Prince / Kisan Mouldings Limited

All as per Sl item No. 50 above but 110 mm bore.

Cutting of the shrubs, plants and bushes etc. of any description and any girth and taking out roots from the wall or roofs / chajjas and making good disturbed portion with PCC 1:2:4 type B-0 or cement mortar (1:3) complete all as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with grade of steel conforming to Fe - 410 - W (Gde E - 250) Quality - A and including dismantling complete all as specified and directed.

Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

All as per Sl item No 54 above but exc. 1.5 Sqm but not exc. 4.0 Sqm each

Taking down shutters of any description not exc 1.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified and as directed.

S&F 105 x 60 mm size pressed steel door frames for doors with one or more rebates and including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

All as per Sl item No 58 above but 165 x 60 mm size.

S&F 30 mm thick pre-laminated medium density fibre (MDF) board flush door shutter, both side laminated of approved colour, interior grade complete all as specified and directed. Make:- Greenply Industries Ltd. / Balaji Action Buildwell / Novapan / National / Kitply

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing (SSR - 2010 Part-II Rates) complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / Sintex / Polywood / Hindopan / Marino

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / Sintex / Polywood / Hindopan / Marino

S&F factory made wire guazed (panel will be wire guazed in lieu of plain PVC sheet) PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. The wire gauze shall be wrapped on an additional square 8 mm MS Solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / Sintex / Polywood / Hindopan / Marino

M&L in repairs 18 mm thick MDF board, interior grade, fixed with screws to timber / steel frame work complete all as specified and directed. Make:- Greenply Industries Ltd. / Balaji Action Buildwell / Novapan / National / Kitply

Extra over rates of plywood / MDF / particle board (18 mm thick) for external teak wood lipping, 6 mm thick fixed with nails complete all as specified and directed.

S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. Make:- Saint Gobain / Modiguard / Asahi India / Triveni Float / IAG / Hindustan Pilkington

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed. Make:- M/s Bharat / M/s Classic / Alans

S&F 100 mm butt hinge, medium weight, cold rolled mild steel complete all as specified and directed. Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison

S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed. Make: M/s Bharat / M/s Classic / Alans

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. Make: M/s Bharat / M/s Classic / Alans

S&F aluminium anodised powder coated frame work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates and including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, (thickness of powder coating not less than 50 micron) complete all as specified and directed. Make:- Indal Co / Hindal Co / Jindal / Ajit India

S&F mortice lock, vertical type, size 100 mm four lever of brass complete all as specified and directed. Make: M/s Godrej / M/s Harrison

S&F in repairs 20 mm dia curtain rod, mild steel, chromium plated with & including suitable fixing CP brackets / clamps & corners to be fixed at ends etc. with necessary screws complete all as specified and directed.

M&L running welding in repairs for thickness of metal to be welded not exc 6 mm complete all as specified and directed.

M&L RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in beams cantilevers, bressummers lintels over 1.5m span including demolition complete all as specified and directed.

M&L use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per Sl item No. 82 above but 6 to 8 mm dia.

Cleaning of blocked sewage line of 100 mm bore pipe by rodding from one manhole to next manhole and washing through in fresh water including removing all sludge from the sewage lines and disposing off properly outside the defence land complete all as specified and as directed.

All as per Sl item No 84 above but 150 mm bore.

All as per Sl item No 84 above but 200 mm bore.

Cleaning of gully trap / Nahani trap / water closet at any floor level by rodding and including removing the debris complete all as specified and as directed.

Cleaning of manhole of size not less than 0.6 m x 0.6 m & depth not exc. 1 m including lifting up & removing sludge, accumulated solid / semi solid sludge and any other foreign material with proper equipments and washing down completely with water for smooth functioning of sewage line, removing sludge obtained from cleaning to a distance not exceeding 50 m, fillling the sludge in newly excavated pit, treating with bleaching powder and refilling top of pit with earth & removing balance earth to a distance n exc 50 m complete all as specified and as directed. Note:- Rate quoted shall deemed to be included cost of all excavation & earth work.

All as per Sl item No. 88 above but depth exc 1 m & not exc. 1.5 m

All as per Sl item No. 88 above but depth exc 1.5 m & not exc. 2 m

M&L precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landing, cover slabs (for manholes etc), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary forms, moulds etc. & demoliton complete all as specified and as directed.

M&L RCC 1:2:4 Type B1 (20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like and including demolition complete all as specified and as directed.

M&L brick work with sub class 'B' brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 including demolition complete all as specified and directed.

All as per Sl item No. 93 above but except bricks. Note:- Serviceable quantity of bricks obtained from demolition shall be reused under this item.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos 8 mm dia TMT bars in full length of wall at every fourth course including demolition complete all as specified and directed.

M&L brick work with sub class 'B' brick, in one brick thick honey comb walling, built in CM 1:4 including demolition complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed. Make:- Fosroc chemicals / STP Ltd / M/s Sika India Ltd / Hindcon Chemicals Limited

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete including demolition complete all as specified and directed.

M&L cement concrete 1:2:4 type B0, (using 12.5 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork & demolition complete all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in walls or retaining walls, any thickness; size or shape and including pilasters, buttresses & columns and including demolition complete all as specified and directed.

Use and Waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete including demolition complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channel and drain and including demolition complete all as specified and directed.

M&L 75 mm thick, PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc. including demolition complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.

All as per Sl item No. 107 above but exc 1.5 m & not exc 3.0 m in depth

Excavating over areas, not exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.

All as per Sl item No. 109 above but exc 1.5 m & not exc 3.0 m deep

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L PCC 1:4:8, type D-2 using 40 mm graded crushed stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 100 mm bore pipe including demolition complete all as specified and directed.

All as per Sl item No. 113 above but for 150 mm bore pipe

All as per Sl item No. 113 above but for 200 mm bore pipe

S&F in repairs 100 mm bore salt glazed stone ware (SGSW) drain pipes grade 'A' laid in trenches & jointed in CM 1:1 and tested complete all as specified and directed. Make:- Hind / Prakash or equivalent as approved by GE

All as per Sl item No. 116 above but 150 mm bore

All as per Sl item No. 116 above but 200 mm bore

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, bore of pipe 200 mm complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brick work, masonry, etc, and including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning filling in and ramming earth in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good in soft/loose soil complete all as specified and directed.

M&L for mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc,) and including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, and including dismantling complete all as as specified and directed (each line wire to be measured).

All as per Sl item No. 123 above but fixing only. Note:- Serviceable quantity obtained from dismantling shall be reused under this item.

Supply only chain link MS galvanized fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc, and including provision of binding wire including dismantling complete all as specified and directed.

All as per Sl item No. 126 above but re-fixing only. Note:- Serviceable quantity obtained from dismantling shall be reused under this item.

M&L mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm but not exc. 10 cm long complete all as specified and directed.

S&F in repairs concertina coil razor blade type, fixed with galvanissed 'J' clips, of following specification :- (a) Dia of coil spiral / loop - 600 mm (b) No of spirals / loops per bundle of coil- 50 (c) Weight of each bundle of coil - 8 Kg (minimum) (d) Coverage of wall / fence per bundle of coil - 6 m (e) Central core wire made from high tensile spring steel wire (conforming to IS:4454) of dia 2.50 mm, UTS 1600 N/Sqmm (minimum), duly hot dipped galvanised (conforming to IS-2629) zinc coating 230gm /sqm (minimum) (f) Razorblade : Electro galvanized steel razorblades of length 11.50 mm, width 19 mm & thickness 0.50 mm, conforming to IS - 1573, zinc coating 120 gm/sqm , pitch of barbs 25.00 mm (g) Handle, clips (minimum 5 clips per 2 spiral) and spikes to be provided as required complete Make :- M/s Shiva Engineering Co. or equivalent

M&L preparation of new steel surfaces of any description not exceeding 10 cm width or girth when unconnected with other painting or when painted in a different tint and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

Embee associates

S D CONSTRUCTION CO

PS ENTERPRISE

M/S TANDRA DEY.

KARMIBRINDA

MS S S CONSTRUCTION AND CO

M/S RANEN PAL

MS ESSCON