Repair and Maintenance of Pollution Control Residential Building HIG House No 8 in Housing Colony Phase III Una i/c internal WS and SI.

Amount

Demolition below G.L. upto all depth and disposal of unserviceable materials upto all leads and lifts & disposal of surplus material . Un- reinforced cement concrete 15 mm in thickness

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within permisses of Deptt.

Not exceeding 3 sq.m in area

Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking within permisses of Deptt..

Not exceeding 3 sq.m in area

Demolition above G.L.upto floor two level including disposal of unserviceable materials upto all leads and lifts and including cutting the necessary reinforcement and separating out from promises of Deptt. . RCC work

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, blasting work and chiselling / wedging out of hard or soft rock where blasing is prohibited up to all depths stacking the excavated soil not more than 3 meteres clear from the edge of excavation and then returning the stacked soil in 15 cms layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer-in- charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a air finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting loor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work including carriage of material in all leads and lifts.

Foundation, footings basis of columns etc. and mass concrete.

Flat surfaces such as soffits of suspended floors, roofs including incliend surfaces upto any degree, landins and the like, landings and the like. Floors etc.upto 200mm. In thickness.

Columns. Pillars, posts & struts square rectangular or polygonal in plan.

Beams, cantilever, girders and lintels sides and soffits of beams, small ends of beams, beam haunching, cantilever girders, bressummers and lintle not exceeding 1 metre in depth.

Providing and laying cement concrete 1 : 6 : 12 (1 cement :6 sand 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads and lifts.

Providing and laying damp proof course 38mm thick with cement concrete 1:2:4 (1 cement:2 sand:4 stone aggregate 12.5mm nominal size) and curing complete.

Applying a coat of hot bitumen ( mexphalt 80/100 or equipment using 1.70 kg.m per on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil including carriage of materials in all leads and lifts.

Providing and laying cement concrete work 1:2:4 ( 1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of material in all leads and lifts.

Foundations, footings, basis of column and the like and tghemass concrete

Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.

Column, pillars, posts and struts upto all heights

Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.

Brick work using 2nd class common burnt clay building bricks in foundation and plinth in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.

Half brick work 2nd class common burnt clay building bricks in super structure above plinth level in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and lifts.

Providing wood work in frames of doors, windows, clerestory windows and other framed wrought, frames and fixed in position:of 2nd.class deodar wood including carriage of material in all leads and lifts.

Providing and fixing 40mm thick panelled door shutter made of 2nd. class deodar wood with 12 mm th. water proof both side pre-laminated ISI mark board , 2nd. class derodar wood chamfered beading 38x40 mm size with frame i.e. style top & bottom rails of 2nd. class deodar wood including stainless steel butt hinges with necessary screw as per Architectural drawing and specification and instructions of Engineer- in- charge includung carriage of material in all leads and lifts.

Providing and fixing 40mm thick single/double leaf glazed window shutters made of 2nd Class Deodar wood. having styles , top rails and bottom rails 75mm width and sash bars having size of 40X40mm I/C chamfered edged beading 20X12 mm for glass panes complete including bright finished black enamelled iron butt hinges with necessary screws including carriage of material in all leads and lifts and as per direction of Engineer-in-charge/Arch.Drawing.

Providing and fixing 40mm thick wire guage shutters using galvanised M.S guage of I.S.guage designation 85 G with wire of dia 0.56mm for doors, windows & clerestory windows including bright finished black enamelled iron butt hinges with necessary screws etc including carriage of material in all leads .and lifts. (a) 2nd. class deodar wood

Providing and fixing 40mmX3mm flat iron hold fast 40cm long including fixing to with 10mm dia meter bolts nuts and wooden plug and embedding in cement concrete frame block 30cmX10cmX15cm in cement concrete1:3:6 (1cement:3 sand:6 graded stone aggregate 20mm noiminal size) including carriage of material in all leads and lifts.

Providing and fixing cup board with 19 mm thick block board shutter i/c 1.0 mm thick coloured high gloss laminatetion sheet ( sunmica) on front faces of cup board interior grade commercial type of core of black board i/c nickle plated piano hinges including mica inside of cabinate of VIRGO make i/c applying a primimng coat on back and sides of cabinate i/c P/F brass bright finished locks and brass handles,. & complete in all respect.as per drawing & specifications of Engineer- in -charge .including carriage of material in all leads and lifts.

Supplying and fixing plain glass panes with putty,glazing clips/glazing pins ,Screws or nails including carriage of material in all leads and lifts.i/c putty if required.including carriage of material in all leads & lifts. - Plain glass 4mm thick

Providing and fixing brass sliding door bolts as per colour and shade approved by the Engineer-in-Charge with bolts and nuts screws etc. complete including carriage of material in all leads & lifts.

Providing and fixing brass tower bolt (barrel type) as per colour and shade approved by the Engineer-in-Charge with screws etc. complete including carriage of material in all leads & lifts.

Providing and fixing brass handles as per colour and shade approved by the Engineer-in-Charge with necessary screws including carriage of material in all leads & lifts.

Providing and fixing bright finished .hard drawn hooks & eyes including carriage of material in all leads & lifts. 150 mm dia

Providing and fixing 100 mm bright finished brass floor door stopper with ruibber cushion screws etc. to suit shutter thickness complete including carriage of material in all leads & lifts.

Providing and fixing double charged vitrified tiles any size10mm thick in grey/ coloured of approved shade of Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads .and lifts Kajaria/Nitco/ Naveen make of approved quality.

Providing and laying Duro stone vetrified tiles (any size ) 8mm thick in grey/coloured or of approved shade of in skirting, riser of step and dado on 12mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including cost of tiles where required to be cut including carriage of material in all leads & lifts. . Kajaria/Nitco/ Naveen make of approved quality.

Providing & fixing Digital Coloured glazed tiles 6 mm thick any size in skirting riser of steps and dado with base12 mm thick cement mortar 1:3 ( 1 cement: 3 sand) and jointed with white cement slurry .The shade and sample to be approved by Engineer-in-charge including carriage of material in all leads and lifts. Kajaria/Nitco/ Naveen make of approved quality.

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including carriage of material in all leads and lifts.. 20mm.thick

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm thick inter locking blocks including carriage of material in all leads and lifts ISI markrd

Steel work welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material in all leads and lifts: -

In gratings framed guard bars, ladders, railling, brackets and similar works i/c making holes & filling the same with cement concrete 1:2:4 (1 cement:2 sand 4 graded stone aggregate 20mm nominal size).

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering and knotting including carriage of material in all leads & lifts.(a) Ready mixed paint brushing wood primer pink.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of all dirt,dust and other foreign matter, sand papering and stopping including carriage of material in all leads & lifts.(a) With enamel paint other than white or white paint. Approved make of Asian/ Nerolac/ICI

Painting one coat (excluding priming coat) on previously wood and wood based surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of material in all leads :- With Enamel paint other than white ( Approved make of Asian/ Nerolac/ICI

Extra over item No.-34 for every subsquent coat of paint on wood including carriage of material in all leads and lifts. : with enamel paint other than white

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of material in all leads and lifts.(a) Enamel paint other than white or white paint. ( Approved make of Asian/ Nerolac/ICI

Repairs to plaster in patches, of 2.50 sqm. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a leadof 20 metres. Cement Mortar 1:4 ( 1 cement : 4 sand). including carriage of material in all leads and lifts-

6mm cement plaster to ceiling in cement mortar 1:3 (1cement :3sand) including carriage of material in all leads & lifts.

15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all heights including arises, Internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 ( 1 cement : 6 sand) including carriage of material in all leads and lifts.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete. including carriage of material in all leads .and lifts

On walls

On ceiling

Applying Birla JK / Sakarani white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads & lifts. (i) In Wall /ceiling surface.

Distempering (two coats) with oil bound washable ditemper of approved brand and manufacture of and of required shade of undecorated wall surfaces to give an even shade over and including a priming coat with Alkali-resistance primer ofapproved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth including carriage of material in all leads and lifts. Approved /Make of Asian/Nerolac/Berger

On walls

On ceiling

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivent on undecorated wall surfaces (two coats) i/c priming coat to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material in all leads & lifts. (i) On Wall /ceiling surface. Approved Make of Asian/ ICI Dulex.

Providing chases 75mm wide 50mm deep (average size) in walls for conduit/G.I pipes and filling the same with cement concrete 1:3:6 (1cement: 3sand: 6 graded stone aggregate 20mm and dowen gauge ) after the conduit / G.I pipe is laid.(excluding the cost of pipe). including carriage of material in all leads-& lift

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall including carriage of material in all leads & lifts. (JINDAL HISAR/ TATA MAKE).

15 mm nominal bore

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1cement : 1 sand) (Seat and over to be measured and paid for separately) including carriage of material in all leads and lifts. (Hindware or Cera Make)

Ordinary Closet

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers :SOLID TYPE including carriage of material in all leads & lifts.:white plastic seat and cover Approved make of Cera/ Hindware

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S.brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material in all leads & lifts.Flat back (i) 550mmx400mm (Hindware or Cera Make) 1st. quality

Providing and fixing vitreous china pedstal for wash basin complete recessed at the back for the recption or the pipes and fittings including carriage of material in all leads & lifts (Hindware or Cera Make) 1st. quality

Providing and fixing C.P. Brass waste for wash basin or sink including carriage of material in all leads & lifts. ( ESS-ESS/ CZAR NOVA)

32mm dia

40mm dia

Providing and fixing M.I. Union of following sizes ( where not included in the items including carriage of material in all leads & lifts.

32mm dia

40mm dia

Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or ply wood sheet and fixed with C.P.Brass screws and washers including carriage of material in all leads & lifts.

Providing and fixing PTMT Jet spray of approved quality & colour with 1.50 metre tube including screws etc. complete in all respect 15mm dia incliding carriage of material in all leads & lifts.

Providing and fixing C.P. brass Towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P.brass screws.including carriage of material in all leads & lifts (i) 600mmX20mm size. ( ESS-ESS/ CZAR NOVA)

Providing and fixing 600x120mm Glass Shelf with C.P.Brass bracket and guard rail complete with , fixed to wooden plugs with C.p Brass screws including carriage of material in all leads and lifts.confirming to BIS specifications. ( ESS-ESS/ CZAR NOVA)

Providing and fixing C.P. brass toilet paper holder including carriage of material in all leads & lifts. ( ESS-ESS/ CZAR NOVA)

Providing and fixing C.P brass soap dish with C.P brass brackets fixed to wooden cleats with C.P brass screws including carriage of material in all leads and lifts. ( ESS-ESS/ CZAR NOVA)

Fixing C.P brass shower rose with C.P brass brackets fixed to wooden cleats with C.P brass screws including carriage of material in all leads and lifts ( ESS-ESS/ CZAR NOVA)

Providing and fixing C.P Brass bib tap including carriage of material in all leads & lifts.(a) 15mm dia. ( ESS-ESS/ CZAR NOVA)

Providing and fixing C.P Brass pillar tap including carriage of material in all leads & lifts.(a) 15mm dia. ( ESS-ESS/ CZAR NOVA)

Providing and fixing C.P Brass angle valve including carriage of material in all leads & lifts.(a) 15mm dia. ( ESS-ESS/ CZAR NOVA)

Providing and fixing wall mixing fauct fior shower & bath with overhead pipe Including carriage of material in all leads and lifts. (a) 15 mm dia

Providing and fixing P.V.C connection with brass unions :-(a) 300/450mm length.including carriage of material in all leads and lifts

Providing and fixing P.V.C waste pipe 32 mm dia including carriage of material in all leads and lifts

Providing and fixing G.I./M.I Union of following sizes (where not included in the items including carriage of material in all leads & lifts..

(a) 15mm nominal bore

Providing and fixing Polythene water storage tank for storage of water upto all heights keeping water hygenic & safe for drinking etc. moulded to seamless perfection from FDA approved grades of polythene (LDPE/ HDDE /CLDPE) to BIS-12701-1989 with 40 mm no,minal bore galvanised steel scour tube with fittings 25mm nominal bore galvanised mild steel overflow tubes with fittings and mosquito proof coupling of approved municipal design,15 mm nominal bore ball valve and mosquito proof galvanised coupling including provising pads of sizes as required and complete tubes as per directions of Engineer-in-Charge including carriage of material in all leads and lifts (a)1000 litres net capacity storage tank of ISI marked sintex make with double.layer including MS Stays for water storage tank.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S.Brackets painted white including cutting holes and making good the same but excluding fitting including carriage of material in all leads & lifts.610 x 460 mm with bowl depth 200 mm.( Dimond make/Neel Kanth)

MOHIT BEDI

PRIYA THAKUR

Shiv Kumar

Om Parkash Govt Contrator