REPAIR TO WALL PANELING, ALUMUNIUM PARTITION WORK, JOINERY REPAIRS AND MISC REPAIRS IN HQ SWC IN ZONE -I AREA UNDER AGE B/R OF GE JAIPUR

Amount

Dismantling and removing from site wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and metalic frame etc complete all a specified and as directed.

S & F PVC Wall Lining (Panelling) consisting of min 5-7mm thick coloured or textured PVC sheet fixed to PVC fillet frame with screws inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing(PVC fillet shall be paid seprately) (including refixing of all fittings on the surface after the work) all a specified and as directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F anodised aluminium Powder Coating door shutters sliding type single alumunium track, aluminium section weighing 0.55 kg/m and above including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screwsetc. as in repairs complete all as specified.

M&L in repair for 09 mm thick prelaminated particle board interior grade, prelaminated both side with decorative choice lamination fixed with screw etc complete all a specified and as directed.

S&F sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane.

S&F sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane.

S&F in repair Door closer aluminium anodized extrudedsection body hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg as in repairs. (Make : Godrej, Samrat, Dorma XLC or equalent)

M & L in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed (Make : Godrej, Samrat, Dorma XLC or equalent)

S&F in repair brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified fixed

S&F in repair 75mm long aluminium door stoppers with two rubber shoes.

M&L for taking out existing Automatic sliding glass door sensor (Dorma system), repairing, servicing and refixing in same position complete all as directed (any accessories requried during repair will be paid measured in separately).

S & F in repair sensor of Dorma system automatic sliding glass door in existing door complete all as directed.

S & F in repair big roller of Dorma system automatic sliding glass door in existing door, complete all as directed.

S & F in repair track profile of Dorma system automatic sliding glass door in existing door, complete all as directed.

Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed by Engineer in Charge.

Taking down of shutters of any description exc 2 sqm each complete all as specified and as directed by Engineer in Charge.

Taking down door chowkaht or frame of any description area n.exc 1.50 Sqm each without taking off shutters from the frame complete all as directed.

Taking down door chowkaht or frame of any description area exc 1.50 Sqm but n exc 4 Sqm each without taking off shutters from the frame complete all as directed.

Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each and re-fixing in same opening after resecuring or easing complete all as specified and directed

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003.

S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and as directed by Engineer in Charge. The size of members of shutters shall be as specified in MES SSR Part-I.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer in Charge. The size of members of shutters shall be as specified in MES SSR Part-I.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing. Make - Rajshri, Sintex

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F steel window with side hung shutters factory made including box type hinges with steel handle and steel peg stay compete with glazing bars devetailed or welded incl inserting the holdfast in stone masonay and make good the distrubed masonary including taking down all as specified and as directed.

S & F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars devetailed or welded incl inserting the holdfast in stone masonay and make good the distrubed masonary including taking down all as specified and as directed.

S & F factory made steel ventilator with top hung shutter including hinges, steel peg stay and handle complete including taking down all as specified and as directed.

S&F 300mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc complete all as specified and as directed by Engineer in Charge. .

S&F in repair 300mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc complete all as specified and as directed by Engineer in Charge. .

S & F 150mm long aluminium handles, cast type anodised complete all as specified and as directed by Engineer in Charge.

S & F in repair 150mm long aluminium handles, cast type anodised complete all as specified and as directed by Engineer in Charge.

S & F 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete all as specified and as directed by Engineer in Charge.

S & F in repair 200mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed complete all as specified and as directed by Engineer in Charge.

S & F 150mm long aluminium anodised barrel tower bolts of extruded sectionand fixed complete all as specified and as directed by Engineer in Charge.

S & F in repair 150mm long aluminium anodised barrel tower bolts of extruded sectionand fixed complete all as specified and as directed by Engineer in Charge.

S & F 100 mm butt hinges medium weight cold rolled stainless steel and fixed complete all as specified and as directed by Engineer in Charge.

S & F in repair 100 mm butt hinges medium weight cold rolled stainless steel and fixed complete all as specified and as directed by Engineer in Charge.

S & F in repair 75 mm butt hinges medium weight cold rolled stainless steel and fixed complete all as specified and as directed by Engineer in Charge.

S & F in repairs aluminium door stopper 150 mm size with double pin and rubber shoe fixed to bottom rail of door shutter complete all as specified and as directed by Engineer in Charge.

S & F as in repair 150mm long extruded Brass handles,fabricated type polished complete

S & F as in repair 200mm long extruded Brass handles,fabricated type polished complete

S & F as in repair 150mm long Brass barrel of extruded section tower bolt with cast or sheet barrel and rolled or cast bolt and fixed complete

S & F as in repair 200mm long Brass barrel of extruded section tower bolt with cast or sheet barrel and rolled or cast bolt and fixed complete

S&F as in repairs 300mm long Brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

Hacking out old broken glass (any thickness, size, quality or description) from metal/aluminum frame including punching or drilling out old glazing pin/spring/ clip complete

M&L Securing glass of any description in existing wooden/aluminum frame glazed with putty / beads including removing loose or decayed putty/beads, rebeading /reputting and painting to match existing work

Supply & Fix froasted glass 6mm thick for windows and urinal partition etc complete all a specified and as directed.

S&F in repair 6mm thick clear toughened glass for aluminium doors and windows etc complete all a specified and as directed.

S&F in repair 6mm thick laminated toughened glass for structural glazing etc complete all a specified and as directed.

S & F galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer in Charge.

S & F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples as to replace the old wire mesh complete all as specified and as directed by Engineer in Charge.

M&L cutting holes in stone walls built in Cement Mortar exc half but n exc one brick depth or embeded portion of hold fast or lugs incl making good to distrubed portion in CM 1:3 or PCC 1:2:4 type B1 as required complete all as specified.

S&F sheet glass 3.00mm thick ordinary quality and glazing with beads fixed with metal panel pin in square n.exc 0.5 Sqm each including hacking out old broken glass complete all as specified and as directed.

S&F in repair sheet glass 3.00mm thick ordinary quality and glazing with beads fixed with metal panel pin in square n.exc 0.5 Sqm each including hacking out old broken glass complete all as specified and as directed.

M & L Preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer in Charge.

M&L Two coats of synthetic enamel paint to new steel surfaces over red oxide primer exc 10 CM in width or girth including preparation of new steel surfaces complete all as specified and as directed by Engineer in Charge. .

Taking down cement plaster or cement lime plaster/ tiles of any descrption on PCC/ stone surface/ brick surfaces of wall or ceiling including raking outs joints, hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer in Charge.

M & L Rendering 15 mm thick on stone masonry wall surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge.

M & L rendering 15mm thick on stone masonary surfaces or surface other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cement.

M & L Rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement etc complete all a specified and as directed.

M & L preparing new plastered surfaces and applying three coats of white wash on ceiling all as specified and as directed

M & L preparing new plastered surfaces and applying two coats of cement base paint on wall over a coat of alkali based primer all as specified and as directed

M&L preparation of newly plastered surface wall and applying two coats of distemper oil emulsion of any tint over a coat of primer complete all as specified and directed.

M&L preparation of old decorated surfaces of walls, pillars and cornices, including brooming down and cleaning the surfaces and applying one coat of white wash on ceiling surfaces complete all as specified & as directed.

M&L preparing old surface of ceiling and applying one coat of distemper (Oil emulsion) of approved tint all as directed.

M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying one coat of distemper of approved tint all as directed.

M&L preparing old decorated surface of walls including brooming down and cleaning the surfaces and applying two coats of distemper of approved tint all as directed

M&L preparing old painted wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint of approved tint all as specified and directed.

M&L preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed.

M&L for prepration of old painted surfaces by manual or mechanical means incl scrapping, rubbing, cleaning etc. and apply one coat of water based premium acrylic smooth exterior emulsion of approved colour ( company dipo tinted) with anti algal properties as per manufacturer instruction on external surface of wall complete all as specified and directed. (Make : (i) Nerolac-Mica Marble (ii) Berger -Antidust (iii) Asian paint - Apex shine).

Supply only integral water proofing compound

M & L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/tr and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.9 litre/10 sqm over new surface complite all as specified and directed

M&L preparation of old decorated surfaces of walls and applying one coat of cement base paint of approved tint all as specified and directed.

M & L for preparing old surface of floor removing all dust, mark and paint on (chequred tile, interloking tile etc) as per company paint manufacturer direction complete all as specified and directed. (Make : Indigo, Asian, Bergere or equalent)

M & L for repairing cast iron pipe of size 75mm to 110mm on wall, underfloor or ceiling and arrest seepage, removing blokage manually or machine complete all as specified and directed. (Note : Demolition of tile, new tile, necessary SWR accessories will be measured and seprately).

Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed

Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge

Taking up or down 25 to 32 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge

S&F15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F 32 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

M & L in repair pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified and directed (Make : Jaquor Cat Part No : KUP-35001PM)

M & L in repair two way bib tap wall flange cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified and directed (Make : Jaquor Cat Part No : ORP-10041PM)

M & L in repair angular stop cock with wall flange hot or cold with and fly-nuts screwed for iron pipe and fixed complete all as specified and directed (Make : Jaquor Cat Part No : ORP-10053PM)

M & L in repair vitreous china wash down water closet (including all arrangement and flushing cistern) etc complete all a specified and as directed. Make : CERA, star white, Cat Part No : 20107 (P-18/S-22)

M & L in repair vitreous china urinal italian collection (including all fixing arrangement joint etc complete all a specified and as directed. Make : CERA, star white, Cat Part No : 96008

M & L in repair vitreous china WHB, Oval type, italian collection (including all fixing arrangement joint etc) Make : CERA, star white, Cat Part No : 10017

M & L in repair crumple joint of bldg at (Colunm, beam etc) teartment with sealing compound as per manufacturer instruction and placed new alumuminum sheet of dimension 100mmx3000mm(each sheet) with self taping screw upto the height of bldg 20 mtr from GLincluding all Necessary scaffolding and saftey equipments. completed all as specified by Egnr-in-Charge

M & L in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule and fixed

M & L in repair stope valve fancy type cast copper alloy chromium plated screwed down high with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed

S&F as in repair Chromium plated jet spray suitable for EWC, complete all as specified

S & F in repair EWC seat cover colourd match to WC

Dismantling old unserviceable RCC / PVC water tank of cap 1000 ltr & removal from site complete all as directed

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified in SSR Part I,

S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified in SSR Part I,

S & F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm dia (minimum weight 210 gms) complete,

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level,10 ltr capacity, white, with intel, ball valve, float and handle including brackets,flushing pipe complete all as specified & directed.

S & F in repair PVC connections 450mm long suitable for 15mm bore GI pipe including PTMT nuts on both sides complete

S & F in repair vitreous china squatting pan 'Orissa' pattern water closet white size 580mm x 440mm with integral foot rest and 'P' or 'S' trap (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etc

S & F in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white incl providing and fixing plugs, securing urinal to plugs with and including 60mm long brass screws with grating and union for discharge pipe including PVC waste pipe complete,

S & F in repair vitreous china wash basin, white flat back size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP coupling , PVC waste pipe complete.

S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors.

S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallls

S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors.

S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallls

S&F 110 mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal etc complete all a specified and as directed.

S&F 110 mm dia PVC (SWR) bends any radius with access door etc complete all a specified and as directed.

S&F 75mm dia PVC (SWR) junction single (Single Tee with access door) equal or unequal etc complete all a specified and as directed.

S&F 75mm dia PVC (SWR) bends any radius etc complete all a specified and as directed.

S&F PVC (SWR) 75 mm dia of outlet nahani trap/floor trap with grating including jointing with solvent cement etc complete all a specified and as directed.

Less Schedule of Credit

Stuti Trading Company (BID ID -3095972)

PUSHPA G ENTERPRISES (BID ID -3095804)

UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3095868)