TP1-74/23-24

Amount

Site Levelling and Grading including Cutting of excess earth and filling in low lying area and removal of boulders from site by engaging JCB and tipper 10 tonnes with initial lead of 200 m including cost of labour, lift etc, complete as instructed by Engineer incharge at site.

Soil investigation & Design based on the foundation recommendation as per soil test report and as per the requirment, including, preparation of Drawings for all the components of the proposed construction and submission of Auto cad drawings 6 copies+2 soft copies, after getting approval from the competent authority, including cost of all materials, labour, leads, lifts T&P etc complete

Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m including removal of excess excavated earth from site including cost of all materials, lead, lift, etc., complete as directed by Engineer at site. In Hard stiff clay, stiff black cotton, hard red earth, shales, murram, stoney earth and earth mixed with small size boulders SS 20 B 90%

Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m including removal of excess excavated earth from site including cost of all materials, lead, lift, etc., complete as directed by Engineer at site. Soft disintegrated rock not requirng blasting 10%

Supplying and filling in foundation and basement with filling M - Sand in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification as directed by Engineer at site

Laying PCC 1:3:6 mix using 20mm HBG machine crushed metal for foundation matt concrete including cost of all labour, materials, lead, lift, curing etc.complete

R.C.C M20 Grade concrete using 12 to 20 mm HBG metal including cost of all materials, form work, labour, lead lift and curing etc., complete but excluding cost of steel reinforcement. For Foundation Raft-W/o FW

R.C.C M20 Grade concrete using 12 to 20 mm HBG metal including cost of all materials, form work, labour, lead lift and curing etc., complete but excluding cost of steel reinforcement. RCC Pedestal / Wall - With FW

R.C.C M20 Grade concrete using 12 to 20 mm HBG metal including cost of all materials, labour, lead lift and curing etc., complete as directed by the Engineer at site (But excluding cost of steel reinforcement). With form work above GL

R.C.C M30 Grade concrete using 12 to 20 mm HBG metal including cost of all materials, form work, labour, lead lift and curing etc., complete but excluding cost of steel reinforcement. (Lintel & Sill)

R.C.C M30 Grade concreteusing 12 to 20 mm HBG metal including cost of all materials, form work, labour, lead lift and curing etc., complete but excluding cost of steel reinforcement. Slab

R.C.C M30 Grade concrete using 12 to 20 mm HBG metal including cost of all materials, form work, labour, lead lift and curing etc., complete but excluding cost of steel reinforcement. Cover Slab

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire etc., complete.

PCC 1:2:4 using 12 to 20 mm HBG metal including cost of all materials, labour, lead lift and curing etc., complete but excluding cost of steel reinforcement. Raft

PCC 1:2:4 using 12 to 20 mm HBG metal including cost of all materials, labour, lead lift and curing etc., complete but excluding cost of steel reinforcement. With Form work

Fabrication of Template and assembling in correct position for various equipment plinth and grouting the foundation bolts including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site

Fabriaction, galvanising and supply of foundation bolt and nuts with 2 nos. washer in High Tensile Steel including 15 cm L at bottom and 10 cm threading with 2 nuts and washers at top including cost of all materials, labour, lead, lift etc. complete.as directed by the Dept. Engineer at site.

Labour charges for transporting and erection of towers with bolt nut including sorting out of tower parts tightening, punching of bolts and nuts and rectification of defects if any during erection, cost of lead lift labour etc complete.

Brick work in CM 1:5 using all ll Class Ground Moulded Chamber Burnt bricks for Basement including the cost of all materilas, lead, lift, labour, Centering Charges T&P etc., complete as directed by the Engineers at site.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Engineer-In-Charge before use on work.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Providing weathering course with one course of weather proof cooling white tiles of size 23x23x2cm/30x30x2cm embedded in cm 1:3 12mm with mortar mixed with water proof liquid 1 lit. per bag of cement with proper slope to drain rain water and using 3mm spacer and pointing with Polymer Modified Cementations Tile Joint Grout inclusive cost of all materials, transport, curing, etc., complete as per standard specification including cost of all materials, labour, lead, lift etc complete.

Plastering in cm 1:3 mix 12mm thick for bottom of roof slab, bottom and slides of sunshade partition walls etc including cost of all materials, lead, lift, watering, curing etc complete.

Colour washing 2 coats with approved Emulsion paint over one priming coat over cement plastered wall surface applying wall putty, cleaning with sand paper, including cleaning, preparing the surface cost of all labours to work at all levels, all materials.

Supplying and fixing MS grill gates, MS grills, name bord, hand rail, lader etc.at various levels as per approved drawing using channel, squar rods, ornamentel grill parts and flat including fixing in position with suitable hold fast locking arrangements etc.complete as per standard specification.

Supplying & fixing chain link fencing 50 x 50 mm square (12G) of required ht including cost of GI binding wire all materials transport, labour, lead and lift etc., complete.

Paving the room floor with rectified vitrified core endura grey coated floor tiles (Industrial type floor of johnson endura make , quality, colour and shade as directed by the engineer at site) of size 600 mm x 600mmx12mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement mortar neatly finished as per standard specification .

Supplying and fixing of wash basin of size 550*400mm with all accessories of approved quality Parryware / Hindware including cost of wash basin with 15mm CP Pillar cock fixing using rag bolt and nut 15mm dia nylon connection hose and outlet using 32mm dia pipe waste coupling waste pipe water pipe for outlet including 15mm control wheel valve, 15mm dia brass nipple etc. complete as per standard specification.

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works).

Supplying and fixing of SINTEX PVC water tank of 1000 litres capasity with necessary specials and fittings including cost of all materials , lead lift etc complete.

Supplying and layling of PVC pipe with required PVC bend T&L bend, union including cutting, jointing where ever necessary earth work excavation refilling necessary fittings, all materials etc., complete. 110mm dia

Supplying and layling of PVC pipe with required PVC bend T&L bend, union including cutting, jointing where ever necessary earth work excavation refilling necessary fittings, all materials etc., complete 32mm dia

Supplying and layling of PVC pipe with required PVC bend T&L bend, union including cutting, jointing where ever necessary earth work excavation refilling necessary fittings, all materials etc., complete 25mm dia

Supplying and fixing gunmental value including cost of materisl, labour, lead, lift etc., complete. 32mm dia

Supplying and fixing gunmental value including cost of materisl, labour, lead, lift etc., complete. 25mm dia

Wiring with 2x1.50 sq.mm PVC unsheathed copper multistand cable of 650v grade in suitable pvc rigid pipe in wall or ceiling with pvc accessories with TW switch box in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with contineous earthwire connection of 14 swg tc wire for light points.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box for 5A 3 pin non inter locking flush type CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point (SD10).

Supplying and fixing box type 4'-40w single flouresent fitting complete with copper choke and condenser 1 no 4'-40w tube with T.W. round block on wall or ceiling with pvc unsheated leads from terminals to the fittings.

Supply and fixing of 1400 mm sweep (56") AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod including fan clamp with side plates and cross arm of size 450 mm.

Supplying and fixing of water tight Bulk head fitting with guard and approved suitable make for incondescent lamp with guard and 100 w bulb.

Supplying and fixing of 40mm dia. GI B class pipe for road crossing including cost of materials, labour lead, lift etc.

Supplying and fixing, testing & comissioning of Surface Mounted LED fittings for 100W LED with necessary connections etc.,of suitable for control room.

Supplying and filling with well gravel in basements in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification.

Filling with stone dust including cost of metal, labour all lead and lift etc., Complete.

Filling with 20 mm B.G metal including cost of metal, labour all lead and lift etc., Complete.

Supplying and spreading of R.R soling stones to a thickness of 150mm with 25% of 40mm IRC HBG stones and 20% of gravel for bindage including cost of all materials, well watering and consolidation with power roller, labour, lead, lift, etc. complete

Providing and laying WBM 75 mm compacted thickness with grade 2 set using 1.00 M3 of 40 mm IRC metal with 0.24 m3 of gravel for blindage per 10 M2 including cost and conveyance of all mateirals and stacking them at the site to departmental gauge for premeasurement, labour charges for spreading metal and graund hand packing to camber watering with all leads for water and compaction by 80-100 KN power roller including hire charges and full charges for power roller and water sprinkler and all other T & Ps , burn cading etc, complete as per std specification for Bottom Layer.

Providing and layng WBM 75 mm compacted thickness with grade 2 set using 1.00 M3 of 40-20 mm IRC metal with 0.24 m3 of gravel for blindate per 10 sq mm including cost of conveyance of all materials and stacking them at the site to department gauge for premeasurement, labuor charges for spreading metal and gravel, hand packing to camlur, watering with all leads for water and compaction by 80-100 KN power roller including hire charges and fuel charges for power roller and water sprinkler and all other T & Ps employed, barricading etc, complete as per std specification for Top Layer.

Dismantling of existing Chain link fencing in as in where is condition along with RCC pillars

Dismantling of RCC

Dismantling of PCC

Dismantling of Brick work

Labour charges for dismantling of existing tower including all labour, lift, etc complete- In Good Condition for Re-Erection

Labour charges for dismantling of existing tower including all labour, lift, etc complete- As and where is condition

Deduct Scrap of Dismantled Tower parts

Fabrication, Galvanising and supply of GI tower parts including cost of all materials, labour, lead, lift etc., complete.as directed by the engineer at site

Supply of Hot dip Galvanised GI bolts & Nuts of various size including cost of all materials, labour, lead, lift etc., complete.as directed by the engineer at site

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

Dillibabu

V.JOTHIKUMARAVEL

JD ENTERPRISES