REPAIR TO ROOF FALSE CEILING AND CERTAIN OTHER WORKS TO BLDGS HQ WNC NMRL NFN AND LHS AREA OF DOCKYARD UNDER AGE B R II UNDER GE NW KUNJALI COLABA MUMBAI

Amount

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish off of the premises complete all as specified and directed by Engr-in-Charge.

Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness complete all as specified and directed by Engr-in-Charge.

Material and labour for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern complete all as specified and directed by Engr-in-Charge.

Material and labour for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceiling board/tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50 x 40 x 0.63 mm and cross tee of size 23.50x23.50x0.63 mm and angle size 19x19x0.63 mm including 3 mm GI wire for suspending holts necessary washers nut/cleats/pin hook etc for securing frame work to ceiling to the snap grid including provn of necessary holes/cutting for providing light/far as required including making necessary recesses/projected pattern complete all as specified and directed by Engr-in-Charge.

Demolition of brick/stone masonry built in any CMcomplete all as specified and directed by Engr-in-Charge.

Material and labour brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Material and labour for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in cm 1:4 complete all as specified and directed by Engr-in-Charge.

Material and labour for 25 mm thick PCC 1:2:4 type B0 using 12.5mm graded aggregate as in floor finished even and fair complete all as specified and directed by Engr-in-Charge.

Material and labour for (450mm x300mm ) x 7 mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 10 mm thick backing coat in cm 1:4 complete all as specified and directed by Engr-in-Charge.

Material and labour for 20 mm thick granite machine cut as in steps, window cills, cooking platform, working table etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. (colour of granite will be decided by the GE/Engr-in-Charge).

Material and labour for 20 mm thick granite machine cut as in skirting/vertical surfaces i.e jambs /risers and pillars etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed by Engr-in-Charge. . (colour of granite will be decided by the GE/Engr-in-Charge).

Material and labour for machine cut kota stone slab flooring 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

Material and labour for machine cut kota stone slab 16 to 18 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

Material and labour for Italian Marble stone 16 to 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Italian Marble stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Material and labour for Italian Marble stone 16 to 18 mm thick machine cutmachine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster of any description on brick, stone or concrete surfaces of walls including raking out joints, hacking for key, scrubbing down with water upto G Plus 9th floor of bldg incl scaffolding complete all as specified and directed by Engr-in-Charge. .

Material and labour for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 3rd floor bldg complete all as specified and directed by Engr-in-Charge. .

Material and labour for rendering 10 mm thick pre polymer modified ready mixed cement based plaster on chajja top and soffits Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 3rd floor bldg complete all as specified and directed by Engr-in-Charge. .

Material and labour for Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Material and labour for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Supply only integral water proofing compound complete all as specified and directed by Engr-in-Charge.

Material and labour for Rendering 15mm thick on brick work or concrete surface in cement mortar 1:4 finished even and fair complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

Material and labour for mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W-(Gde-E-250) quality A complete all as specified and directed by Engr-in-Charge.

All as per Item No 33 above but MS Plate (Plain or Chequred) complete all as specified and directed by Engr-in-Charge.

Supply and fixing for Mild steel rolled mild steel sctions of grade Fe 410-W (Gde-E-250) quality-A as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets etc. complete all as specified and directed by Engr-in-Charge.

Supply and fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walk ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Demolition of Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed by Engr-in-Charge.

Demolition of Cement concrete (unreinforced) of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engr-in-Charge.

Material and labour for providing water proofing treatment with five layered 4mm thick APP (Atactic Poly propylene) modified bituminous membrane re-inforced with no woven polyester mat of weight 180 gms/Sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythylene applied by thermo fusion using LPG torch on bottom portion of the membrane after applying a coat of bituminous primer @ 0.25 Kg/Sqm over roof and over the APP membrane provide a polypropylene/ polyester, Non woven geotextile fabric of 150 gsm over the geo textile fabric provide 22 mm thick hydraullically pressed PCC tiles as per IS laid over cement screed bed in CM 1:4, 20 mm thick jointed and pointed. (An overlap of 100mm & 150mm shall be provided on sides ends respectively) etc including removing of existing waterproofing treatment complete all as specified and directed by Engr-in-Charge.

Material and labour for Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.

Supply and fixing aluminium window, doors with shutters / frames / partitions made out of extruded powder coasted aluminium sections, with sliding or openable shutters including frame & necessary joining cleats, glazing clip, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts hooks and eyes, peg syays and handles including connected items, with and including, making good to the disturbed portion with its original specification, complete all as specified and directed by Engr-in-Charge. Minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors.

Supply and fixing concealed star lock powder coated for aluminium window fixed as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge.

Material and labour 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing 8 to 12mm thick, toughened glass for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed by Engr-in-Charge.

Material and labour for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by Engr-in-Charge.

Supply and fixing factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze complete all as specified and directed by Engr-in-Charge.

Supply and fixing 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and directed by Engr-in-Charge.

Supply and fixing Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) in opening as per specifiecation and drawings complete all as specified and directed by Engr-in-Charge.

Supply and fixing 30 mm thick Rajshri brand factory made moulded door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20 mm x 40 mm for stiles as well as top, bottoMaterial and labour ock rail. MS frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement/eynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 Kg/Cbm manufactured by an ISO - 9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel 5mm plain /prelam PVC sheet to be pasted using solvent cement /eynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton (made by sticking 2 Nos foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 Nos ) thick PVC sheet to be given for lock provision at lock height . Door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardwares should be fixed with 20 mm x 8 mm size steel screws etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing.

Supply and fixing in repairs vitreous china wash down water closet pan coloured (pedestal pattern) including plastic seat cover with nuts and bolts etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified and directed by Engr-in-Charge.

Supply and fixing vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and padestal complete as fixed in repair complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 15 mm bore dia of pipe, brass chromium plated fancy type bib tap .complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends. complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs single piece WC with UF Soft close slim seat cover fixing accessories, accessories set and cistern fitting incl trap/connecting piece complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs wall hung WC with UF Soft close slim seat cover hinges, fixing accessories, accessories set incl trap/connecting piece complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs single piece slim concealed cistern with wall mounting frame, installed kit and S-type drain pipe connection set for wall hung WC including accessories set a complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs towel ring square with round flange (Make - Jaquar CAT PART NO - ACN - CHR-1121N or as approved by GE) complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs CP towel rail 600 mm long with round flange (Make - Jaquar CAT PART NO - ACN-CHR-1111NM or as approved by GE) complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs CP toilet roll holder with flap (Make - Jaquar CAT PART NO_ ACN-CHR-11535 or as approved by GE) complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook (Make - Jaquar CAT PART No-ALD-CHR-585) or as approved by GE complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs Pillar cock taps 15 mm bore with lift type operating knob and base flange complete all as specified and directed by Engr-in-Charge. by Engr-in-Charge. (Make - Jaquar CAT PART NO- FLR-CHR-5015) or as approved by GE

Supply and fixing in repairs bib cock 15 mm bore complete all as specified and directed by Engr-in-Charge. (Make Jaquar CAT PART No- CON-CHR-047KN) or as approved by GE.

Supply and fixing in repairs angular stop cock with wall flange of 15 mm bore (Make - Jaquar CAT PART NO- CQT-CHR-23059) or as approved by GE. complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair for Battery operated urinal sensor Flushing complete all as specified and directed by Engr-in-Charge.( Make-Hindware or as approved by GE)

Supply and fixing overhead shower of 100 mm round shape single flow (ABS Body chromium plated with gray face plate) with rubit cleaning system ( Make- Jaquar CAT PART NO- OHS-CHR-1989) or as approved by GE complete all as specified and directed by Engr-in-Charge.

Supply and fixing Corner glass shelf with brackets (Make - Jaquar CAT PART NO- ACN-CHR-1173) or as approved by GE complete all as specified and directed by Engr-in-Charge.

Supply and fixing 600 mm glass self assembly fency type with CP frame (Make - Jaquar CAT PART NO AKP-35771P) or as approved by GE fixed with chromium plated brass brackets and screw complete all as specified and directed by Engr-in-Charge.

Material and labour 32mm dia waste coupling, PTMT for glazed ware sinks, basin, etc with long shanks and fly, flange end.complete all as specified and directed by Engr-in-Charge.

Supply and fixing PVC connection on pipe 450mm long with brass nut bolt complete all as specified and directed by Engr-in-Charge.

Supply and fixing PVC waste pipe 32mm dia 800mm long with socket suitable for WHB/Sink/urinal complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 75mm dia of out let cast iron floor trap with grating including jointing to waste pipe in cement concrete tybe B-1 (1:2:4). complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisternswith brackets, flush pipes, inlet ,outlet etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing of in repairs vitreous china urinal, half stall type complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and directed by Engr-in-Charge.

Material and labour in repairs for viterous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, complete all as specified and directed by Engr-in-Charge. .

Supply and fixing in repairs15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe, fixed as complete all as specified and directed by Engr-in-Charge.

Dismantling of water tank capacity 1000 ltrs, 2000 ltrs 5000 Ltrs and10000 Ltrs removing to store all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs rotational moulded polythene water storage tank of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge. .

Supply and fixing in repairs rotational moulded polythene water storage tank of 2000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge.

Supply and fixing rotational moulded polythene water storage tank of 5000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge. .

Supply and fixing rotational moulded polythene water storage tank of 7500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge.

Supply and fixing rotational moulded polythene water storage tank of 10000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fxing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

Supply and fixing under counter wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as specified and directed by Engr-in-Charge. Make - Jaquar CAT PART NO- CNS-WHT-705 or as approved by GE

Supply and fixing counter top wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as specified and directed by Engr-in-Charge. Make _ Jaquar CAT PART NO- ALS-WHT-85601 or as approved by GE

Material and labour in repairs for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs brass CP shower rose 125mm size complete all as specified and directed by Engr-in-Charge. .

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore complete all as specified and directed by Engr-in-Charge.

Taking up or down existing GI water tubing complete with all fittings of 20 mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fixing GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge.

Supply and fixing GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends etc (Note :- Measurement shall be taken along the centre line of the pipes) complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor including fixing clips, bends, elbows, shoes etc complete all as specified and directed by Engr-in-Charge. .

Supply and fixing in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed by Engr-in-Charge. .

Supply and fixing for PVC (SWR) bends any radius 160mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fixing for PVC (SWR) bends any radius 110mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fixing for PVC (SWR) bends any radius 75mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm thick, bar size 6.2mm and 7.5mm thick in required sizescomplete all as specified and directed by Engr-in-Charge.

Supply and fixing extruded aluminium alloy handles fabricated type anodized 150 mm size. complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and directed by Engr-in-Charge. .

Supply and fixing in repair extruded Brass handles fabricated type 125 mm size complete all as specified and directed by Engr-in-Charge. .

Supply and fixing in repairs extruded Brass handles fabricated type 150 mm size complete all as specified and directed by Engr-in-Charge. .

Supply and fix in repairs 125mm size brass handle cast type polished bright complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs 150mm size brass handle cast type polished bright complete all as specified and directed by Engr-in-Charge.

Supply and fixing mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe 290-Gde-E-165. complete all as specified and directed by Engr-in-Charge.

Supply and fixing aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg & fixed in repairs complete all as specified and directed by Engr-in-Charge. .

Supply and fixing in repairs for 100mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed type c-21 etc complete all as specified and directed by Engr-in-Charge.

All as per item No 115 as above but 75 mm in size complete all as specified and directed by Engr-in-Charge.

Supply and fixing 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed by Engr-in-Charge.

Supply and fixing 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed by Engr-in-Charge. .

Supply and fixing in repair150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed by Engr-in-Charge. .

Supply and fixing in repairs 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy a complete all as specified and directed by Engr-in-Charge. .

Supply and fixing in repair 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed by Engr-in-Charge.

Supply and fixing 200mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed by Engr-in-Charge. .

Supply and fixing 150 mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed by Engr-in-Charge. .

Supply and fixing in repairs for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair for 140mm long floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed by Engr-in-Charge.

Supply and fixing aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs Wall paper of fibrious material, nonwoven Vinyl free, making them fixed to wall with dry strips or with approved adhesive complete all as specified and directed by Engr-in-Charge. Deign & pattern as approved by GE.

Supply and fixing in repairs Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing for 125mm size double action spring hinges, mild steel wire spring, stove enamelled black as fixed in repairs complete all as specified and directed by Engr-in-Charge. .

Supply and fixing 250 mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed in repairs complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of old plaster surface and necessary scaffolding upto G plus 9th floor of bldg complete all as specified and directed by Engr-in-Charge.

Material and labour for complete removal of existing treatment in ceiling surfaces and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

Material and labour for New treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding upto G+9 storey of bldg complete all as specified and directed by Engr-in-Charge.

Material and labour for teatment of old walls and applying one coat of acrylic (antifungal) exterior grade paint on wall/roof including preparation of old plastered surface and necessary scaffolding upto G+9 storey of bldg complete all as specified and directed by Engr-in-Charge. .

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down and applying two coats of oil bound distemper over a coat 1 to 2 mm thick wall care putty (JK/Birla ) and primer incl preparation of surfaces complete all as specified and directed.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down and applying One coats of oil bound distemper over a coat 1 to 2 mm thick wall care putty incl preparation of surfaces complete all as specified and directed by Engr-in-Charge.

Material and labour for New plastering surface on walls and applying two coat of oil bound distemper over a coat 1 to 2 mm thick wall care putty (JK/Birla ) and primer incl preparation of surfaces complete all as specified and directed by Engr-in-Charge.

Dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm and over in section, in any position complete all as specified and directed by Engr-in-Charge.

Material and labour for Plain fillets. square, rectangular or triangular in section exc 13 & n. exc 25 sq cm, clean sawn, secured with nails or brads etc complete all as specified and directed by Engr-in-Charge.

Material and labour for 2nd class hardwood clean sawn batten exc 15 n. exc 25 sqcm at 35 cm centre to centre . complete all as specified and directed by Engr-in-Charge.

Material and labour for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new/old work with two or more coats complete all as specified and directed by Engr-in-Charge.

Material and labour for preparing new or privious untreated surface applying two coat of varnishing over a coat of woodfiller transparant. complete all as specified and directed by Engr-in-Charge.

Material and labour for preparing old treated surface applying one coat of varnishing over a coat of woodfiller transparant. complete all as specified and directed by Engr-in-Charge.

Material and labour for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry. complete all as specified and directed by Engr-in-Charge.

Material and labour for Screwing eaves tiles (each tile screwed) to eaves battens with galvanised iron screws, GI and bitumen washers including drilling holes in mangalore tiles. complete all as specified and directed by Engr-in-Charge.

Material and labour for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6. complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs for door lock 7/8 inch mortice handle pair in black silver finish with legend 65 Brass dead bolt double action 6 Lever lock. complete all as specified and directed by Engr-in-Charge.

Material and labour for complete removal of existing treatment on steel surfaces and applying a coat epoxy putty/Metal putty 1 to 2mm thick on steel surfaces, preparatory and applying two coats of synthetic enamel paint over a coat of red oxide. complete all as specified and directed by Engr-in-Charge.

Material and labour desilting and cleaning the septic tanks/manholes of any size/shape/depth by removing liquid, waste, night soil, sludge mechanically or manually with all necessary precaution as per rule in vouge as directed including depositing the sludge by excavation with depth not less than 30cms with necessary arrangement to avoid adours such as refilling excavated earth on eposited sludge and removing surplus soil to a distance out side MDarea and deposited where directed complete all as specified and directed by Engr-in-Charge. Note :- For purpose of measurement and payment internal size of the tank upto liquid depth only shall be considered.

Cleaning to sewage pipe (SWG) systematically as directed by passing rope knots, bamboos etc of required size and shape and removing waste/sludge and depositing sludge as mentioned in item No. 150 hereinbefore for the drain pipes of the following sizes:

Upto 150mm dia

Exceeding 150mm dia

Cleaning to toilets, bathrooms chockup systematically as directed by passing rope knots, bamboos etc of required size and shape and removing waste/sludge and depositing sludge as mentioned in item No. 150 hereinbefore for the drain pipes of the following sizes: Note :- For purpose of measurement and payment EACH TIME of the cleaning of chockup shall be considered.

Removing Bldg Material exc 1.5 Km but n.exc 15 Km and deposited where complete all as specified and directed by Engr-in-Charge.

Supply and fixing 3 mm thick aluminium composite panel cladding plain of approved colour/shade to beam/column/slab incircular/rectangular shape inbcluding cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hollow section 25 x 25 mm not exceeding 900 mm C/C on exceeding column/beam/slab to hold APC cladding etc complete all as specified and directed by Engr-in-Charge. (Note : colour/pattern of ACP sheet shall be given by GE).

Material and labour for 4mm thick bakelite sheet with decoratie choice laminated on both side complete all as specified and directed by Engr-in-Charge. .

Material and labour for 4mm thick preparation of old painted wooden surfaes of any description over 10cm width or girth and applying Two coat of synthetic enamel paint. complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of New painted steel surfaces of any description over 10cm width or girth and applying Two coat of synthetic enamel paint over a coat of red oxid primer complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying Two coat of synthetic enamel paint. complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation of old painted Plaster/Concrete surfaes of any description over 10cm width or girth and applying Two coat of synthetic enamel paint. complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) complete all as specified and directed by Engr-in-Charge.

Providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone agg) as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof kerbs, water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge.

Material and labour for RCC 1:1.5:3 type B1 nominal mix (20mm graded stone agg) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge.

Material and labour for RCC 1:1.5:3 type B1 nominal mix (20mm graded stone agg) as in beams, cantilevers, bressumers, lintels over 1.5 m span complete all as specified and directed by Engr-in-Charge.

Material and labour for RCC1:1.5:3 type BI nominal mix (20mm graded stone agg) as in columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge.

Form work rough finished to sides of concrete foundations, footings, bases of columns , raft and raft beams, sides and soffits ( if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr-in-Charge.

Material and labour mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engr-in-Charge.

All as per srl item No. 167 above but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc complete all as specified and directed by Engr-in-Charge.

Material and labour for machine pressed cheqered cement coloured tiles of size 250mmx250mmx20mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and directed by Engr-in-Charge.

Material and labour for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm graded stone agg) as in sub base complete all as specified and directed by Engr-in-Charge.

Material and labour 100 mm thick cement concrete type B-1 , 1:2:4 (20 mm graded stone agg) as in hardstanding laid in alternate panel complete all as specified and directed by Engr-in-Charge.

Material and labour for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and directed by Engr-in-Charge.

Material and labour for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water etc and applying two coats of plastic paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

All as per item No -174 above but one coat complete all as specified and directed by Engr-in-Charge.

Material and labour for preparation and applying two coat of floor/Roof paint (Make-Indigo Floor paint). complete all as specified and directed by Engr-in-Charge.

Shree Ayyappa Engineering

Garima Construction Co

Nilesh Construction

jalandhara construction