8361 ADDITION ALTERATION AND SPECIAL REPAIRS TO STORE AREA OF INS ANGRE PROVISION OF AIR CONDITIONERS UPS AND DEFICIENT FURNITURE FOR DATA DISSEMINATION SYSTEM PROJECT DDSP2 UNDER GE NW KUNJALI ADDITION ALTERATION AND SPECIAL REPAIRS TO EXISTING FENC

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding as required and rubbishing off the premises etc complete all as specified and as directed.

M&L Plastering 15mm thick in CM 1:6 on brick surfaces or concrete surfaces , finished with Neeru finish on walls complete all as specified and as directed.

M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed.

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Note-Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified and as directed.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and as directed.

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc all as specified and directed.

S&F powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partion/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant etc all as specified and as directed.

S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 102, 7.5 mm thick all as specified and as directed by Engr- in- charge.

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc. complete all as specified and as directed.

S&F 12 mm thick prilaminated partical board exterior grade laminated on both side with decorative choice lamination fixed to aluminium frame work for door panel shutter as directed.

S&F in repairs aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc. complete all as specified and as directed.

S&F in repairs 18/19 mm thcik prelaminated partical board exterior grade prelaminated one side with lamination and other side balancing white lamination fixed with screw to frame work cupboard etc including 6 mm thick teak wood beading all around complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and as directed.

S&F butt hinges 100 mm mild steel hinges medium weight and fixed complete all as specified and as directed.

M & L for MS flat for hold fast. Conforming to Fe-310-0 or Fe-410-0 complete all as specified and as directed.

S&F in repairs 125 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25 mm thick 1:2:4, type B-0 (using 12.5 mm graded stone agg) as in flooring finished even and all as specified and directed.

M&L cement concrete tiles 30 cm x 30 cm x 22 mm thick, machine pressed (with grey cement and pigment), set jointed and pointed in neat cement slurry in floors and cut and polished over & including 20 mm thick bedding layer in cement mortar 1:4 all as specified.

Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M &L for machine cut kota stone slab flooring 18 to 20 mm thick as in steps, landings, floors etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,mirror polishing incl making 02 Nos grooves in steps over & incl 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately).

M&L PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) cement concrete as a leveling course on roof surfaces and coping etc. complete all as specified and as directed.

M&L for applying a coat of bituminous primer conforming to IS-3384 @ 1.20 Kg/Sqm on prepared surface of plaster as per manufacturer's instructions, manufactured by the same agency of APP membrane. Providing and laying five layered 4 mm thick APP (Atatic poly propylene) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm as specified here-in-after. The APP membrane shall be laid using LPG torch-on-application with minimum 100 mm side overlap and 150 mm end overlap. The laying of membrane shall be got done through an authorized applicator of manufacturer of the membrane. The APP membrane shall be taken upto minimum 200 mm on vertical surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provde requisite slop towards rain water pipe outlet complete all as specified and as directed. Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of primer for APP membrane and SBR latex

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land

M&L for Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes gate stops, parts of ranges, balusters and similar articles exc 5 Kg Each all as specified.

M&L for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of of primer all as specified and directed.

M&L for preparation of plastered /unplastered surfaces of ceiling surfaces and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds etc complete all as specified and directed.

M&L Complete removal of existing treatment of old decorated surfaces of walls soffits, facia roof and applying two coat of weather proof acrylic based paint (100% acrylic) over one coat of cement base primer with necessary scafolding for high rise bldgs. etc complete all as specified and directed.

S&F in repairs door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed all as specified and directed.

M&L for bakelite sheet with decoratie choice laminated on both side complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specially provide complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, post embedded in cement mortar, brick work, masonry etc. including taking out embedded portion and making good disturbed gruond complete all as specified and directed.

Dismantling of fencing wire mesh any type complete all as specified.

M&L for stone walling of random rubble uncoursed, brought up to course well bonded, bedded and solidly hearted built in cement mortar 1:4 complete all as specified and directed.

M&L for stone walling of random rubble uncoursed, brought up to course well bonded, bedded and solidly hearted built in cement mortar 1:4 but except stone all as specified and directed.

M&L for flush pointing to random rubble masonry in cement mortar 1:3, uncoursed or brought upto courses complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, (using 20mm graded aggregate) as in grouting of angle posts, pillars etc including necessary form work complete all as specified and directed.

M&L for Providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone agg) as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof kerbs water troughs and the like including weathering slightly rounded or chamfered angles and throating as directed.

M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 57 above but except bricks

M&L for Cutting out & removal of plants, roots, shurbs etc from the roof, brick/stone wall built in cement mortar & applying chemical GLYPHOSATE 41% SL (Soluble Liquid) mixed with water in the proportion of 1: 75, at the place to avoid re-growing of plants/roots & making good the disturbed portion of roof, wall with brick works in CM 1:3 at wall portion & PCC 1:2:4 at roof slab & matching the surface to existing finish like white wash cement base paint etc over 15mm thick rendering in CM 1:4 including disposal of demolished material/ waste out of M D land of Bldg/ ground/stilt plus 4 floors complete all as specified and directed.

S&F in repairs galavanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including,securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (Note:-Each line wire to be measured)

S&F in repairs barbed razor type concertina coil, 9SWG hot galvanized spring tensile wire of UTS 145 to 150 N/Sqm, zinc coating 250 to 300 gms/Sqm, dia of coil when un-streched shall be 610 mm having minimum of coil (GI strip) 1.625 Kg/RM, hot dip galvanized razor ribbon tape of size 0.50 mm thickness, 19 mm wide before wrapping on central core wire fixed with 1.66 mm thick GI clips (minimum 25 Nos /RM) and special nut and bolts to hold two coils together and extra rows paralled wire of 10 gauge complete all as specified and as directed.

S&F mild steel works in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar works conforming to FE- 290 (Gde E-165) complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type fixed complete all as specified and directed.

Fixing only chain link fencing incl line wires any mesh size and type to any type of standards, rails staining bolts etc incl provn of binding wires complete all as specified and directed.

S&F 10mm dia MS bars provided in between fencing post to support chain link fencing incl necessary cutting, bending with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

S&F MS bolts with hexagonal or square heads end and screwed end to be fixed with washers and one hexagonal or square nut n exc 50mm long and shank of 5 to 10 mm dia all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs etc all as specified and directed.

M&L preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs etc all as specified and directed.

Dismantling and taking down the existing old copper/Aluminum conductor point wiring of light/fan/ 5/15 Amps socket bell point etc complete with all fittings accessories, such as switches, switch sockets ceiling rose etc from the surface casing/caping and concealed wiring including making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm size, 1100 volts (ISI marked), FRLS grade drawn through & including non metalic rigid, PVC non metallic Conduit, ISI marked, not less than 25mm dia with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 1.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC modular box with cover plate complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Switch socket measured & paid separately.

One light point controlled by one 5A switch

One ceiling fan/wall fan/exhaust fan point controlled by one switch

One 5A flush type switch socket point on independent board

One 5 Amps switch socket combination on same board

M&L for point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC modular box with cover plate complete comprising of One 5pin, 15 Amps switch socket combination on board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red/Blue/Yellow (ii) Neutral - Black (iii) Earth - green (b) Switch socket measured & paid separately. (c) Make of wire : Polycabl/Plaza/Havells/Gloster (d) Caping casing make : Asian/madi/Precision/National

M&L for sub-main wiring with 2 runs of 4.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Make of wire : Polycab/ Havells/ Gloster/ Plaza

S & F in repirs LED light fitting 20W, 230 V, 4 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB4F20WLED/W (Nakshatra series) or equivalent cat part in Crompton/Wipro /Philips

S & F in repirs LED light fitting 10W, 230 V, 2 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB2F10WLED/W (Nakshatra series) or equivalent cat part in Crompton/Wipro /Philips

S &F in repair Ultra slim edge lit type recess mounting LED 2X2 Luminaire 36 watt and extruded aluminium housing with anti-glare diffuser provides high quality ecomonic energy saving lighting LED Luminaire suitable for 600 x 600 mm modular/ POP/ Gypsum ceiling complete all as specified and as directed. Make: Crompton cat No LCPL-36-CDL(2X2) / C&S cat No LTCRSLM36WATT2X2 or equivalent Cat part in Surya / Philips / Bajaj

Supply and fix building security light new generation energy saving and environmental friendly long life versatile powder coated pressure die-cast aluminium compact IP-66 roadway luminaire with high power LEDs as light with heat resistant toughened glass with lens source and exclusively designed polly corbonate cover along with electronic driver of cap 45 W with all accessories including provission of GI bracket, clamps, Nut, bolt etc complete all as directed.

S & F modular switch 1 way 6A all as specified and directed. Make : Roma/Goldmedal/Legrand

S & F modular switch 1 way 16A,1 module all as specified and directed. Make : Roma/Goldmedal/Legrand

S & F modular socket, 6A - 2/3 pin combined 2 modules all as specified and directed by EIC. Make : Roma/Goldmedal/Legrand

S & F modular socket 6/16A,2/3 pin, combined 2 module all as specified and directed. Make : Roma/Goldmedal/Legrand

S & F ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed. Make : Cona/Anchor/Roma/Goldmedal/Legrand

S&F for modular fan step regulator, 120W - 2 modular all as specified and directed. Make : Roma/Goldmedal/Legrand

S & F MCCB, 415 volts, four pole of cap 100 Amps, 16 KA, ICS = 100% ICU, with fixed Thermal - Magnetic setting including spreader terminal/ thimble of suitable size and making connections complete all as directed. Make - Legrand cat No 4200 15 or equivalent in siemens/GE / C&S

S & F in replacement of MCB, SPN 40 to 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed. Make - Legrand cat No 4086 18-20 or equivalent in Siemens /GE/ C&S

S & F in replacement of MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as directed. Make - Legrand cat No 4085 87-95 or equivalent in Siemens /GE/ C&S

S & F in repair Ceiling fan 5 Star, Rated 1200 mm sweep heavy duty type complete with and suitable for operation on 230 Volts single phase 50 Hz AC, having air delivery 220cum/min, 350rpm, supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and deposited in MES store yard completed all as specified and directed. Make: Havells/CG/ khaitan

S & F in repair Ceiling fan 5 Star, Rated 1400 mm sweep heavy duty type complete with and suitable for operation on 230 Volts single phase 50 Hz AC, having air delivery 220cum/min, 350rpm, supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and deposited in MES store yard completed all as specified and directed. Make: Havells/CG/ khaitan

S & F in repair Wall fan of sweep 450 mm, high performance motor for better air delivery, Jerk free oscillation & smooth running aerodynamically designed balanced propeller type blade, Superior low voltage performance for operation on 230 Volts single phase 50 Hz AC, having air delivery 100cum/min, 1850rpm, supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and deposit old wall fan to MES store complete all as specified and directed. Make: Havells ( Airboll hi-speed) /CG/ khaitan

S & F in repair Pedestal fan of sweep 600 mm heavy duty type and suitable for operation on 230 Volts single phase 50 Hz AC, supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and deposit old wall fan to MES store complete all as specified and directed. Make: Havells( Turboforce)/CG/ khaitan

S & F exhaust fan of sweep 600 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

S & F exhaust fan of sweep 450 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

S & F in repair exhaust fan of sweep 380 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

S & F in repair exhaust fan of sweep 300 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected and incl galvanised earth lead wire 4.0mm dia by means of nuts & bolts, check nuts and wassher of galvinsed incl PCC (1:2:4) type B-1 cover reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25mm x 25mm x 3mm excavation and earth work in any type of soil, charcoal dust, salt light grade GI watering pipe 20mm dia with funnel and wire-mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distrubution board complete all to as shown in electrical plate No 3 of MES sch 2009 (part-I) connected main switch board all as specified and testing on completion .

M & L for 4mm GI wire earth continuity conductor or main earthing lead fixed to wall or buried in ground and fixed to panel/transformer alongwith 20mm GI pipe light grade for protection complete all as specified and as directed.

S & F in replacement 20 Amps Single pole and neutral enclosure with a Two Pin and earth plug and socket complete with one single pole MCB and making connections complete all as directed. Make -Legrand Cat Part No. 5078 14 or equivalent in Siemens /GE/ C&S

Supply, install, Commisioning and testing of commercial air curtain of size 4 feet ,Air velocity ≥15-17 m/s, 230 Volts, air flow ≥ 2750, Noise Level >70dB completed all as specified and directed. Make:- Best Quality as approved by GE

S&F Flame Proof Switch rotary type with termination box in LM6 single pole 250 V, completed all as specified and directed. Make - Sudhir Cat No JB/OA/104 or equivalent in Shyam/Baliga

S&F CMRI Certified LED Flameproof 2X16W/20W & 2X16/20W LED Tube Light fixture for Gas / Vapor Group of IIA & IIB and Zone 1 & 2. IP65 Protection with electronic ballast bipin holders connector block etc complete with accessories prewired and incl connecting up with twin core twisted flexible copper conductor cable with suitable size complete as directed. Make - Crompton cat No EXTN2LT8-16/20 or equivalent in Bajaj/ Philips / C&S

S&F Flame Proof Exhaust fan size 380 mm 1440 rpm complete with accessories prewired and incl connecting up with twin core twisted flexible copper conductor cable with suitable size complete as directed. Make - Sudhir Cat No JB/OA/104 or equivalent in Shyam/Baliga

S&F Flame Proof Junction Box with Plain cover 3/4" ET Dia 80complete as directed. Make - Sudhir Cat No EF 140 or equivalent in Shyam/Baliga

Material and labour for point wiring 1.5 sq mm FRLS Copper cable 1100 volt grade drawn in and including stove enamelled steel ERW conduit not less than 19mm dia including spacers, saddles, screws etc & 1.5 sqmm PVC insulated copper earth wire including 2mm thick MS sheet fabricated terminal box for fixing switch with 3mm thick hylam sheet top cover all as specified. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Switch socket measured & paid separately.

Supply, install, testing and commissioning wall mounted Split type AC 1.5 TR capacity units indoor/outdoor complete with cordless remote control unit, 2020-240 volt, 50 Hz, single phase fitted with high quality rotary compressor air ioniser and Plasma filter for better indoor air quality with 5 star rating including inbuilt of voltage stabilizer for voltage bariation complete all as specified and directed. Note : Rate of supporting brackets for outdoor unit is deemed to be included in rate quoted. Make : Voltas/LG/Hitachi/Dankin.

Supply, install, testing and commissioning wall mounted Split type AC 1.0 TR capacity units indoor/outdoor complete with cordless remote control unit, 2020-240 volt, 50 Hz, single phase fitted with high quality rotary compressor air ioniser and Plasma filter for better indoor air quality with 5 star rating including inbuilt of voltage stabilizer for voltage bariation complete all as specified and directed. Note : Rate of supporting brackets for outdoor unit is deemed to be included in rate quoted. Make : Voltas/LG/Hitachi/Dankin.

S & F modular power socket 25A, 2 module, 25A plug top, 25A mini MCB 'C' series 3KA including 4 module box with cover plate complete all as specified and directed. Make: Crabtree SAP code : ACNKCXW253, DCTNCSPA025, ACAGXXW253, ACVPPCWV03, ACTXPIWX03 or equivalent in Anchor /Roma

Supply and fixing copper tubings of appropriate dia offor suction line & for liquid discharge line duly insulated with suitable insulation material including making hole in wall for passing thugh pipe and making good distrubed surface completely.

Supply, install, Test and commissioning BE promt 16 KVA inline UPS with isolation transformer, 3 phasse input output 3 phase including rack & links etc complete as directed. Make : Numaric or equivalent As approved by GE

Supply, install, Test and commissioning 2 Hrs backup 12V/75Ah x30 Nos SMF batteries including connected all accessories etc complete all as specified and directed. Make : Exide/Amron / Lumex

M & L Submain wiring with 4 Sqmm single core multistranded PVC insulated & unsheathed copper conductors 1100 volts FRLS grade ISI marked drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc including one PVC insulated & unsheathed multistranded copper conductor 4.0 Sq. mm FRLS grade ISI make as earth continuity conductor connected to common earth as earth dolly. Make : Polycab/Plaza/Havells/Gloster

S&F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 08 way, 240 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 41 or equivalent in Siemens /GE/ C&S

S&F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 04 way, 240 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 40 or equivalent in Siemens /GE/ C&S

S&F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting VTPN 4 way, 440 volts with 250 A Copper Busbar for each phase, 2 Neutral bar, 2 Earthbar and Cable ties for cable managementcopper, dust and vermin proof suitable for incorporation of DPX³ 100 MCCB DB's etc complete all as directed. Make - Legrand cat part No 5077 50 or equivalent in Siemen /GE/ C&S NOTE FOR ITEM No. 110 to 112 : [i] MCB DBs shall be concealed in wall wherever posible including making good the surface to match with surrounding. [ii] The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

M&L for sub-main wiring with 2 runs of 10.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 10.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Make of wire : Polycab/ Havells/ Gloster/ Plaza

S&F for Rigid non-metallic PVC conduit 20mm dia incl connecting to AC condenced water drain pipe complete fixing accessories such AS complete of all tees, bends,elbows, reducers, mouth tube ends fixing accessories such as GI saddles, full threded screws and (Narayan) nylon rawl plugs etc surfaced on walls/roofs all as specified and as directed

Genius Construction Co.