Supply of De-centralized materials and Work for capacity enhancement of 11/0.4 kV substation, Installation of 11/0.4 kV substation , Construction and bifurcation of 11 kV line Mirzapur

Amount

Supply of following Decentralized materials at the works site as per RESSPO norms.

Stone pad 300x300x75 mm (Providing by Contractor)

X-arms holding clamps with bolts & nuts for PCC/STP (Providing by Contractor)

F-bracket with bolts & nuts for PCC/STP (Providing by Contractor)

Al. binding wire (Providing by Contractor)

M.S clamp for Top, T-off channel with bolts & nuts for PCC/STP (Providing by Contractor)

P.G clamps for weasel conductor (Providing by Contractor)

Danger board with clamp & bolts (Providing by Contractor)

L.T clamps with bolts & nut for PCC pole (Providing by Contractor)

Earth wire clamps for PCC Pole (Providing by Contractor)

L.T Shackle Insulators 100x115 mm (Providing by Contractor)

Copper L-Piece 50x225x10 mm (LS) (Providing by Contractor)

Copper L-Piece 62x225x12 mm (LS) (Providing by Contractor)

All lugs 240 mm2 (Providing by Contractor)

All lugs 120 mm2 (Providing by Contractor)

All lugs 70 mm2 (Providing by Contractor)

Loop Guard (Providing by Contractor)

Nurt and Bolts (Providing by Contractor)

M.S clamp with bolts & nuts Painted with red oxide (Providing by Contractor)

Deed end Clamp for pole /Bracket with nuts& bolts (Providing by Contractor)

I Hook (for Deed end Clamp) (Providing by Contractor)

Suspension Clamp with Nurt and Bolts (Providing by Contractor)

I Hook (for Suspension Clamp) (Providing by Contractor)

L.T Connector A Type (Providing by Contractor)

L.T Connector B Type (Providing by Contractor)

L.T bare nuetral Connector (Providing by Contractor)

Distribution boxes/Kiosk for LT Pole /bracket with clamp bolts & nuts (Providing by Contractor)

Jointing Kit Cable Box I/D and O/D (Providing by Contractor)

E Bracket (Providing by Contractor)

Cartage of following materials from ESC, Mirzapur to work site including loading & unloading charge.

ST Poles 11 mtr long (Provided by Department)

PCC Poles 8.5 mtr long (Provided by Department)

Line materials with ACSR Weasel / Rabit Conductor (Provided by Department)

Arial Bunch Cable 3*120+1*95+1*16mm2 (Provided by Department)

11 KV VCB outgoing 200/100/5A (Provided by Department)

Cartage of 11 KV XLPE Cable Size 185mm2 (Provided by Department)

Transformer 250 KVA, (Provided by Department)

Transformer 100 KVA, (Provided by Department)

Transformer 63 KVA, (Provided by Department)

Transformer 25 KVA, (Provided by Department)

Erection

Erection of single support ST/PCC pole for construction of 11 KV/LT line including digging of pit, fitting of all accessories, back filling of earth & others required work.

Laying of 11 KV Cable Including cost of Sands and Bricks.

Grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost).

Grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost).

Earthing of Poles

Stringing & sagging of 3 phase HT/LT line upto proper sag including laying of ACSR Weasel / rabit Conductor, binding with insulators & jumpering.

Erection of Arial Bunch Cable 3*120+1*95+1*16mm2

Erection of Sectional Double Pole Structure of PCC pole including digging of pit, fitting of all accessories, back filling of earth, grouting of each pole & stay sets with materials, Earthing & other required works.

Construction of Transformer plinth for 250 KVA Transformer of 2x2x1.5 mtr. Including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials.

Well type earthing of 250 KVA Transformer by using B class G.I. pipe of 1.5 " dia and making hand pipe type earth boring IInd strata of water or 60 ft. whichever is deeper about 6" of G.I. pipe shall remain above ground level 2 No. G.I. earth clamp shall also be welded to the portion of pipe which is above the ground level. Through this G.I. Clamp and G.I. Strip 30x5mm duly galvanized shall be connected with nut & bolts. Every DT shall have 2 such earthing, One earthing for T/F neutral and second earthing for T/F body. All requred materials shall by provided by the contractor.

Fencing of T/F with M.S. Square mesh welded/fixed on M.S. Angle of size 65x65x6 mm with gate hinges & shutter assembly, of over all size 3x3x2.5 mtr as per drawing

Mounting of 250 KVA Transformer as per RESSPO norms

Mounting of 100 KVA Transformer as per RESSPO norms

Mounting of 63 KVA Transformer as per RESSPO norms

Mounting of 25 KVA Transformer as per RESSPO norms

Dismantaling of Jarjar ACSR Weasel Conductor/G.I. wire

Cartage of Jarjar ACSR Weasel Conductor/G.I. wire from site to ESC, Mirzapur

Installation of 11 KV VCB Pannel (O/G) 200/100/5A

Testing & commissioning of I/C/O/G 11 KV swichgear

Cartage of received back 25 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge.

Cartage of received back 63 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge.

Cartage of received back 100 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge.

Cartage of received back 10 KVA Transformer from work site to ESC, Mirzapur including loading & unloading charge.

Filling og 11 KV Cable Jointing Kit I/D and O/D

Earthing of Indoor Equipments

M/S A.K. ENTERPRISES