Construction of Road, RCC Drain, Under Ground Drainage and External Electrification to Bani oni Slum at Hubballi City

Construction of Road, RCC Drain, Under Ground Drainage and External Electrification to Bani oni Slum at Hubballi City

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work ---- With all Lead and Lift Loading and unloading as per the direction of engineer in ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Centering & Shuttering : Cement Concrete Drain Walls: Additionalities for formwork,centering &scaffolding - Appendix- I- 35% ---- With all Lead and Lift Loading and unloading as per the direction of e...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m heigh...

Centering & Shuttering : Foundation, Sub structure of Cross drainages: Additionalities for formwork,centering &scaffolding - Appendix- I- 5% ---- With all Lead and Lift Loading and unloading as per th...

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjac...

Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimming to the required line, grade, profile and ...

Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical ...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement...

Plain Cement Pavement Quality M30 grade Concrete (RMC) with OPC & GGBS laid without Paver. Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GG...

Precast Cement Concrete Interlocking Blocks. Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle l...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, l...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. ---- With all Lead and Lift Loading ...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material,...

Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying t...

Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying t...

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCEDpipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site,...

Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ...

Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ...

Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ...

Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , ...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work ---- With all Lead and Lift Loading and unloading as per the direction of engineer in ...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of antiglare clear diffuser with Injection moulded polycar...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Conical hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, in...

Supplying,andfixingofHotdipGalvanizedM.S.BracketsuitableforoutdoorluminariesandmountedonOctagonalpoleusingnecessarybolts, nuts etc., complete. Single Arm Bracket with 2000 mm Standard 40/50 mm dia ---...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqm...

25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm) ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm) ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, (54 GI Wires - 2.5 mm Dia) ...

185 Sqmm, (51 GI Wires - 3.15 mm Dia) ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

240 Sqmm, (55 GI Wires - 3.15 mm Dia) ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. HT Cable 3x95 to 150 Sqmm ---- With all Lead and Lift Loading a...

3x185 to 240 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. LT Cable. 2.5 to 25 Sqmm ---- With all Lead and Lift Loading an...

35 to 95 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Aluminium End Terminal (Lug) 10 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

16 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

25 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

95 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

HDPE Grade PE100-PN6.0,110mm dia ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

HDPE Grade PE100-PN6.0,160mm dia ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

TIMER PANEL : Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32A ---- With all Lead and Lift Loading and unloading as per t...

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40A ---...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying & fixing miniature circuit breakers on existing MCB distri bution boards using necessary fixing materials & 'C' Type curve, indi cator ON/OFF, energy cross-3 with Short circuit breaking capa...

6-32 A TPN ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- With all Lead and Lift Loading and unloading as per the direction of e...

Supplying A rated 3phase with neutral busbar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x ...

Fabricating supplying and mounting MS box made out SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped w...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. ---- With all Lead and Lift Loading and un...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copperstripsforgroundingconnections,usingnecessaryfixingmaterials as required. 25x6 mm GI strip ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Spiral Earth Electrode ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Providing Spiral Earth Electrode type earthing (without charcoal, salt etc.,) ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Releasing of Conductor ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Releasing & Refixing of Over Head Service Mains (Single Phase/3 phase) Per connection/installation (While replacing existing Pole) ---- With all Lead and Lift Loading and unloading as per the directio...

Releasing & Refixing of Over Head Service Mains (Single Phase/Three Phase) for consumer installation and street lighting and similar work (While replacing existing Pole) ---- With all Lead and Lift Lo...

Releasing and Refixing Insulator of 11 kV Pin Insulator ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Releasing and Refixing Insulator of 11 kV Dead End Insulator Disc, Strain etc ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Releasing of Single/3 Phase Meter. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Releasing of HT cable after excavation refilling, consolidation Rewinding to the drum etc., ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

do- for LT cable ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable. 3x95 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

3x240 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable. 3x95 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

3x240 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable. Up to 4Cx50 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

3.5 x 70/95/120 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Making and Fixing pot head for HT Cable only. 3x95 to 3x150 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

3x185 to 3x240 Sqmm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

8 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2 ---- With all Lead and Lift Loading and unloading as per the direction of en...

12 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2 ---- With all Lead and Lift Loading and unloading as per the direction of e...

11 kV, 200 Amps Single Break GOS ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - GI ---- With all Lead and Lift Loading and unloading as per the direction of...

Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification.of BESCOM - 11 kV, HG Fuse Unit with Solid Core Insulator ---- With all Lead and Lift Loadi...

Supplying and Fixing including all Hardwares etc complete as per the standard technical specification of BESCOM.- 10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR ---- With al...

Cross Arms (MS & GI) as per IS-1977, 11 kV, Horizontal Cross Arm - Galvanised Iron (GI) ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

HT ST Support 50x8 mm Flat - GI ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

DISC Insulator 45 kN Porcelain ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying and Fixing …..including all Hardwares etc complete as per the standard technical specification BESCOM - 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) ---- With all Le...

Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification BESCOM - GUY Set ---- With all Lead and Lift Loading and unloading as per the direct...

Caution/Danger Board ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

LT Protection Kit ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

b) LT Wiring (From DTC to LT Line Through Metering Box & LT Protection Kit) SINGLE CIRCUIT (Material Charges). PVC Wire - 95 Sqmm Al Wt: 25 Kg, Total Wt: 36 Kg/100 Mtr Coil ---- With all Lead and Lif...

95 Sqmm Copper Terminal, Apprx Wt: 58 Gm ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

PG Clamp Rabbit to Insulated Wire 95 Sqmm (Dwg No. BESCOM/GM/QS&S/43 Dtd 24.11.2018) ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

(Dwg No. BESCOM/GM/QS&S/38 Dtd 24.11.2018) ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

GI Fish Plate ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying and fixing of class B GI pipe on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class - 100 mm ---- With all Lead and Lift Loading and unloading as per...

For Distribution Transformer Centre (DTC) MS Box for housing the ETV Meter 3 Phase 4 Wire 5 Amps, with associated LT CT 0.5 Accuracy Class, ring type, with wiring Clamps, B&N and all other accessorie...

LT 3 Phase, 4 Wire, CT Operated DLMS Complaint ETV Meter-5A, class 0.5s Accuracy (Used for 25 HP/18KW & Above Installations, DTC Metering) ---- With all Lead and Lift Loading and unloading as per the ...

Erection of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for mounting of Transform...

For 100 to 250 kVA ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Erection of 2 Pole Structure using RCC/PSCC Pole 9 to 10 Mtr long ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. Hard Soil ---- With all Lead and Lift Loading and unloading as per the direction of eng...

12 Ways (Thermoset Plastic Enclosure) ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Erection of H-Frame. ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing of V-Shape/Horizontal cross arm including Single Top Support Brace and Insulator fixing ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing of HT/LT Single Top Support ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT) but us...

Fixing Danger Board ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing of GOS including wiring (11 kV Single Break 200 Amps) ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing of 3 Nos Lightning Arrestor including wiring ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

GI pipe 100 mm (Nominal bore),medium class (inlcuding accessories) ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Fixing of LT Protection Kit ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Wiring of 1 Circuit of LT Wiring for for 25/63/100 kVA DTC to the existing LT protection Kit/Distribution Box via metering box. (includes fixing of necessary supports like 2 Pin cross arm, Spacer etc...

Fixing Metering Box for housing the ETV Meter 3 Phase 4 Wire along with CT's, Meter & wiring for DTC, 25/63 kVA TC ---- With all Lead and Lift Loading and unloading as per the direction of engineer in...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

MACHINERY & EQUIPMENT: Category-1 Hiring of crane for releasing existing Transformer and erection of NEW 250 to 500kVA Transformers. (applicable for maintenance works only and in case of non - availab...

Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge. Bit...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Percentage on finished rate of concrete per m3-Earth retaining structures-10%. Feeder Pillar ---- With all Lead and Lift Loading and unloading as per the direction of engineer in charge

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...