RENOVATION OF KITCHEN CUM STORE BLOCK

Amount

Dismantling plain cement concrete (W-0034)

Dismantling Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Dismantling Doors and Windows including removal of frames, hinges and fastenings

Supply of New Modern UPVC Window

Labour charges for fixing windows and ventilators along with frames in position etc., complete.

Supply and fixing of Grill frame for all above windows (Supplying fabricating and placing in position mild steel plain or RTS bars)

Petty iron works and fixing in position mild steel grills for windows, ventilators, etc

Dadooing the walls with of approved quality and colour plain ceramic tiles size 300mmx450mmx8mm thick laid in cement mortar 1:2, 10mm thick and pointing with white cement using 0.4Kg/M2 including finishing the point and pointing flush in the file surface complete 10 M2(Page 108)

Flooring with Granite size & variety in Cement mortar 1:2 in all floors etc., complete complying with standard specifications and as directed by the departmental officers.

Washing of plastered surface with soap, soda and water (or with soda lime, brush and water)

Thorough scrapping of old plastered surface for kitchen

SS Double burner Gas Range Size 60"x30"x24" M.S Inner angle frame of 32x6mm thick SS Top of 16 gauge salem sheet SS Side cover sheet of 18 gauge SS Leg of OD with Nylon levelling bush cast iron pan support, T-65 Burner, Copper pig tail, Needle control valve etc., Argon arc welded with mat polish etc., and as directed by the Director.

Meat Door Specification : UPVC door with frame, 6mm Glss, hinges auto close, locks and labour and Transport charges

Painting two coats with plastic Emulsion paint by (ACE) of approved quality and colour over a priming coat including clean removal of dirt, plaster of pairs, putty etc wherever required (SI 358).

Supply and filling M-sand in foundation

Providing Plain cement concrete 1:4 :8 using 40mm metal jelly for foundation

Providing Plain cement concrete 1:2:4 using 20mm metal jelly for base (Fixing of tiles)

Brick work in cement mortar 1:5 (One cement and five sand using second class table molded chamber burnt bricks of size Masonry projection wherever necessary for obtaining required elevation should be done without cost) For foundation and basement

Plastering 1:4 12mm thick

Laying cement based hydralically pressed anti skid tiles of approved quality and design 20mm thick laid in cement mortar 1:3 20mm thick and pointed with same coloured cement (20mm thick tiles) (Page 119)

Dismantling plain cement concrete (W-0034)

Providing Plain cement concrete 1:4:8 (metal concrete) using 40mm metal jelly for foundation

Providing Plain cement concrete 1:2:4 (lean concrete) using 20mm metal jelly for foundation an dmaintain 3% slope

Providing Plain cement concrete 1:4:8 (metal concrete) using 40mm metal jelly for foundation

Supply and erection of steel centering for plane surface of CC Platform

supplying, fabricating and placing in position of MS/RTS for Roads

Painting two coat with ready mixed paint of approved brand and colour over one primer for wood work (Painting two coats for old wood works)

Painting two coat with ready mixed paint of approved brand and colour over one primer for iron work (Painting one coat for old iron works)

Supplying of AC Exhaust Fan 450mm (18”) Sweep (Heavy Duty)

Fixing of AC Exhaust Fan 450mm (18”) Sweep (Heavy Duty)

European Water Closet with “P” or “S” Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 12.5 litre capacity Porcelain Low Level Flusing Tank with all internal fitting for toilet

Wash Hand Basin (With Pedestal) of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia ‘B’ Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc

CP Two Way Bib Cock with Health Faucet

Pillar Cock (for Wash Basin) – CP Brass

SS Towel Rack 600mm long with Lower Hanger

Brass Chromium Plated Soap Tray of size 150mm x 100mm

4’ 18W Crystal Glass LED Tube Light Fitting

labour charges for fixing above Item No 29 to Item No 36 & Below Item No 15 to Item 21

Supply of fixing best CW fitting panelled door single leaf of size 1.00 mx2.10m).

RANGER OFFICE - REST ROOM

Earth work excavating and depositing on bank with initial lead of 10mt. And initial lift of 2mts in Hard gravelly soil for foundation

Supply and filling M sand for foundation, basement etc.,

Plain cement concrete 1:4:8 using 40mm metal for foundation

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification

Cement concrete 1:2:4(one cement, two sand and four hard broken stone) using 20 mm gauge hard broken granite stone jelly for all RCC works such as lintels, beams, floor or roof slab, canopy slab, sill slabs, sunshades, staircase faces and other similar it.

Brick work in C.M 1:5 using second class chamber burnt and table moulded bricks of 9"x4½x3" size for basement in super structure

Plastering CM 1:5 12 mm thick for wall surface

Flooring with plain ceramic tiles of approved quality and colour of size 305x305x6mm thick laid in cm1:3 for 20mm thick and painting with white cement including furnishing to joint and painting flash with tiles surface complete

Dadooing the walls with of approved quality and colour plain ceramic tiles size 300mmx450mmx8mm thick laid in cement mortar 1:2, 10mm thick and pointing with white cement using 0.4Kg/M2 including finishing the point and pointing flush in the file surface complete 10m2(Page 108)

Painting two coats with plastic Emulsion paint by (ACE) of approved quality and colour over a priming coat for outer wall

Finishing the top of roof with on course of machine pressed tiles (23 cm x 23 cm x 20mm) in cement mortar 1:3 (one cement and three sand) 12mm thick with crude oil 10 % by weight of cement used and pointed neatly with the same oiled mortar.

Supplying and fixing of Fly Proof Mesh for Doors and Windows using 50mmx25mm x3mm M.S Square tube outer frame over window shutters with M.S "Z" and "T" section of size 25mmx25mmx3mm tk. Stainless steel fly proof mesh sandwich with in between the M.S Square tube as per standard specification and as directed by the departmental officers.

Supplying and fixing in position 15mm dia following taps made of Jaquar or equivalent (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.

Swan neck tap

Angle cock

European Water Closet with “P” or “S” Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 10 litre capacity PVC Low Level Flusing Tank with all internal fittings

CP Two Way Bib Cock with Health Faucet

Supplying and fixing in position of Stainless steel Bottle trap of Jaquar or equivalent make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.

Supplying and fixing in position Frameless mirror of 5mm thick with size of 1000 x 780mm frameless modern mirror with beveled edges of Saint Gobin brand of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification.

Supplying and fixing approved best quality brass Stainless steel towel rail 600mm long of approved make (Jaquar or Equivalent )with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications.

Supplying and fixing in position best quality approved make of Jaquar or equivalent under counter oval type wash hand basin of size 560 x 450mm with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

UPVC Elbow

25 mm dia

UPVC Tee

25 mm dia

UPVC Reducer

32mm x 25mm dia

Supplying, laying and jointing UPVC Pipe

25 mm dia

Crystal glass LED Tube light fitting

15W LED Bulb

HANIF MART (BID ID -1537554)