Providing and Laying 60mm thick interlocking tile in footpath,construction of Boundary wall, chainlink fencing and Landscaping of ground at Govt. Degree College Kunjwani.

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish outside the periphery of the area cleared.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth as directed by the I/C engineer, disposed earth is to be levelled and neatly dressed in:

Providing and laying in position cement concrete of specified grade including the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 crushed stone aggregate 40mm nominal size) including all carriages Complete job.

Providing and laying in position cement concrete of specified grade including the cost of centring and shuttering- All work upto plinth level.1:3:6 (1 cement: 3 coarse sand: 6 crushed stone aggregate 20mm nominal size) including all carriages complete job.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders railings, brackets, gates & similar works.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level including cost of centring, shuttering, fmishing and reinforcement.1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) including all carriages complete job.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars complete job.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints withor without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (precast C.C. kerb stone shall be approved by Engineer-in-charge).

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) upto floor V level. Including all carriages complete job.

Providing and fixing G. I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge.Made of G. I. wire of dia 4mm

12mm Cement plaster plaster of mix 1 : 6 ( 1 cement : 6 fine sand ) complete job.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10 sqm

Supplying and stacking at site dump manure from badi or other approved source including carriage (manure measured in stacks will be reduced by 8% for payment)

Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer incharge (cost of sludge,dump manure or/and good earth to be paid seperately)

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete.Hot finished welded type tubes.

Providing & Fixing ACP sheet including supply,labour,scaffolding with complete fittings on truss including carriage of material (complete job)

Supplying & Fixing Stainless steel letters (grade 304) on ACP sheet including embossing,scaffolding etc complete job.

Providing & Fixing High pressure laminate sheet on MS tabular section Gate(HPL sheet 6mm thick) (decorative Bothside) Make English oak

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any colour and shape (Area of slab over 0.5 sqm) 18mm thick

12mm Cement plaster finished with a floating coat of neat cement of mix:1 : 4 ( 1 cement : 4 fine sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size)Crushed

Supply & fixing roof mounted exhaust fans having turbine diameter upto 28" including all fittings

Enganging hydraulic earth excavator 3D including driver & fuel for levelling of undulated ground complete job.

Hydraulic earth excavator 3D including driver & fuel

Enganging tractor with trolley for the disposal of available excavated eart including loading,unloading complete job.

Providing and fixing Powder coated aluminium grill of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws & U/H Channel @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Powder coated standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment)

Supply and planting of ornamental plants,glowed seasonal flower plants as per approved samples approved by Engineer-in-charge including digging of pits of size 3’-0’’x3’-0’’x3’-0’’.mixing of earth with required quantity fertilizer/organic fertilizer/manure watering and upkeeping till the ornamental plants are fully glowed/blossom including all carriages,polythene bags and other material complete.the quantity is subject to requirement from time to time.

Royal Palm (10-12 ft.)

Areca Palm (6 ft.) big (5-6 branches)

Cycus Palm (3 ft. to 4 ft.)

Araucaria Cookie (7 ft.-8 ft.)

Acalypha Plant (4 ft.)

Magnolia Grandiflora

Hibiscus (Bangalore variety) Ball dia of 1’-6’’ to 2’-0’’

Chandani Verigated Dwarf (1 ft.)

coleus premium sun choclate cherry

coleus wizard valvet red

coleus superfine rainbow festive dance

Ravis palm (chali)

Daydream plant

Azalea plant

Saplera plant

Marigold

Mir and Sons

RAM PARSAD SHARMA

Raina and Sons

Jaswant Singh

Jai Singh Manhas