REPAIR TO FENCING GATE BOUNDARY WALL HARDSTANDING AND PATH AT VARIOUS LOCATIONS UNDER AGE BR 1 OF GE AF ADM AREA AGRA

Amount

Dismantling of fencing posts or struts (wood, steel or R.C.C.) embedded in concrete of any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling of fencing wire mesh of any type complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out in soft/ loose soil complete all as specified and directed.

S&F mild steel section as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

All as per Item No 4.00 here-in-before but fabrication and fixing only.

Supply only chain link MS galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply only MS round bar bars for weaving in chain link fencing, in available lengths Fe 410-W (Gde-E- 250) quality- A complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5cm long 5 to 10 mm dia complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for preparing new previously treated or untreated steel surface of any description, over 10cm in width or girth,not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of brickwork masonry, built in cement mortar mortar complete all as specified and directed.

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

All as per Item No 13.00 here-in-before but Except bricks. Note : Bricks shall be used as retrived from ser item No 12.00 here-in-before.

M&L for rendering 15 mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement plaster 1:4 on other than fair faces of brick work or concrete surfaces , finished even and smooth without using extra cement complete all as specified and directed.

M&Lfor providing cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in copings including weathering, slightly rounded or chamfered angles and throating & formwork complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surface on wall & applying two coats of cement base paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for MS work, portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc 15cm long complete all as specified and directed.

Demolition of cement concrete of any description and in any position and dispose off out side of Defence premises complete all as specified and directed.

M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection finished the surface even and fair complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base below floor/ tiles/ paver complete all as specified and directed.

M&L for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/ per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed.

M&L for forming 12 mm thick and 100 mm deep expansion joints filled with preformed bituminous filler and top 30 mm primedd and sealed with sealing compound, Grade-A complete all as specified and directed.

M&L for machine pressed precast cement concrete interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade over and including 50 mm thick sand cushoning complete all as specified and directed.

M&L for coloured chequered cement concrete (with grey cement and pigment) tiles of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors, over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15 mm cement plaster 1 : 1/2 : 2 (1 cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings & providing grooves complete all as specified and directed.

M&L in repair 16 to 18 mm dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS nut and bolt 10 mm dia ,150 mm long in each slab, making V-groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed.

M&L for rendering 15 mm thick in cement plaster 1:6 on other than fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for sand stone chamfer, splays or arris in facework exc 15 mm but n. exc 50 mm wide complete all as specified and directed.

M&L for cement concrete 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) louvres and jallies, 25 mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:4 complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition of existing RCC complete all as specified and directed.

M&L fo formwork, rough finish, rectangular surface to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&Lfor mild steel, TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel, TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M/s Pooran Singh and Company

HARI BUILDERS

M/s K S Builders

M/s M S Sharma and Co.

m/s shanti consruction co

Sethi Brothers

Rakesh kumar