IMPROVEMENT OF WATER SUPPLY SCHEME MAHI NANGAL BLOCK TALWANDI SABO. DISTT. BATHINDA Under 15th finance Commission

Carriage of Surkhi, sand, bajri, ballast, stone, boulders, kankar, building rubbish Carriage of material excluding initial lead of 5 Km a) Jalabad (Av. Lead 125Km) Upto130 Km (Item No. 5.2 (i)

b) Ghaggar Sand & Bajri (Av. Lead 320 Km) Upto 300 Km

301 km to 320 km

c) Filter Media (Av. Lead 320Km) Upto 300 Km

301 km to 320 km

Dismantling concrete Reinforced cement concrete. (Item No. 8.6 (e))

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. (Item No. 9.8)

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. (Item No. 10.21)

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. (Item No. 11.5)

12.5 mm thick cement plaster 1:2 with cement rendering on plaster 1mm thick. (Item No. 15.7 + 15.48)

Cement pointing 1:2 deep variety. (Item No. 15.59)

White washing (Three coat) (Item No. 16.3)

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two coats to give an even shade. (Item No. 16.13)

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. a) With Special Quality Paint (Item No. 16.16 (a))

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. A) With Special Quality Paint (Item No. 16.17 (a))

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete (Item No. 18.18)

Extra allowance for scaffolding. (Item No. 19.15)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). A) Class PN-1 as per ISI b) 100mm i/d Sluice Valves flanged (Item No. 28.27)

c) 150mm i/d Sluice Valves flanged

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below:- a) Top layer :- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source. (Item No. 28.51 (a))

Taking out various layers of filter media screening, washing, after washing placing the same in the filter beds. 2nd layer :- Coursed sand screened, cleaned and washed and graded from 3mm to 6mm (from Pathankot or approved equivalent quarry). (Item No. NS)

3rd layer :- Bajri screened, cleaned and washed and graded from 6mm to 20mm (from Pathankot or approved equivalent quarry).

4th layer :- Bajri (Coursed) screened, cleaned and washed and graded from 20mm to 25mm (from Pathankot or approved equivalent quarry).

Bottom layer :- Broken stone, screened, cleaned and washed and graded from 50mm to 75mm (from Pathankot or approved equivalent quarry).

Washing the false floor slabs with bruising & cleaning the cross drains false slab replacing the same etc. complete in all respect. (Item No. NS)

Repair of Expansion Joint 100 mm i/d (Item No. NS)

Credit of old Sluice Valve. (Item No. NS)