Construction and Maintenance of OR-27-775 L293-Perpa To Talakanjakana of PMGSY-IV Batch-I

BT Road Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MORD technical specification cluase 201.1. & direction of Engineer-in-charge (by manual means).

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking theunserviceable material with all lifts and lead of 1000m as per clause202.1of MORD specification for Rural roads & as per direction of the Engineer-in-charge.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 and as per the direction of the Engineer in charge.

Excavation of roadway in ordinary rock with hydraulic excavator including cutting and loading in tippers, transporting to embankment site with all leads and lifts, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302.of MORD and as per direction of the Engineer-in-charge.

Excavation of roadway in hard rock (requiring blasting) by drilling, blasting and breaking loading and disposal of cut rocks with all leads and lifts trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302 of MORD and as per direction of the Engineer-in-charge.

Excavation of roadway in hard rock (blasting prohibited) by drilling, blasting and breaking loading and disposal of cut rocks with all leads and lifts trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302 of MORD and as per direction of the Engineer-in-charge.

Construction of embankment with approved material obtained from borrow pits with all leads and lifts, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 by mechanical means as per Technical Specification Clause 301.5 and as per the direction of the Engineer in charge.

Fine dressing &Turfing including transportation of turfs by mechanical means with all leads & lifts and placing of turfs in position and ramming with thapies including watering and cost of labour & all materials etc. complete as per direction of Engineer - in - charge.

Construction of Granular Sub-Base providing well graded material, as per IRCSP:77-2008) Well Graded Granular Sub-Base Materialspreading in uniform layers with grader on prepared surface, mixing by mix in place method with rotavator and compacting with smooth wheel roller at OMC to achieve the desired density,complete as per MORD Technical Specification Clause 401 as per direction of Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable (moorum sand addmixture) to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405 of MoRD & as per direction of Engineer-in-Charge. Grading -II