Immediate measures to restore the Siligurijan Sluice under SDRF for 2021-22.

Amount

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

M.S. plate 6 mm for shutter and overtop

M.S. channel (100 x 50 ) mm for stiffeners.

M.S. flat (50 x 6 ) mm for fixing rubber seal

'J' type rubber seal 125 mm

Nuts & bolts ( assorted size )

M.S. washer ( assorted size )

M.S. Electrode 8.S WG

Red Oxide Primer

Antisol Red Oxide paint

Turpentine Oil

Steel wire brush

Painting brush 3"

Refilled Oxygen Gas

Refilled DA Gas

J' type Rubber seal corner 125 mm

H.S. Diesel for Generator

M.S. Channel 150 x75 mm for Guide, Top & Bottom channel etc

Guide channel separator with nut on both end with tube of length 250 mm to 460 mm

M.S. Plateform

M.S. Angle 75 x75 x 6 mm

M.S. Shaft ( Best Quality ) 50 mm dia

Thread cutting 2 TPI including fine finishing and making hole in one end as per direction 50mm

C.I. Boss with internal thread cutting 2 TPI making groove for bearing slot for lock plate & 1.5" drill for providing handle as per direction for size : 125 mm x 175 mm

G.I. pipe for Boss handle & distant tube Size 25 mm

M.S. base Plate 300 x 300 x 10 mm

M.S. lock Plate 300 x 300 x 8 mm

H.D. Thrust ball bearing (best quality)ISI specified a)50 mm

Clamp for lock plate

Hire charge of crane with capacity 8 tonne with operator excluding fuel & lubricant.

Casual labours for helping works of lifting and carrying sluice gate materials, other allied works etc.

Arc welding cable 600 amps

Matured Jati Bamboo 75mm to 100mm dia and 6 m to 7 m long

Coir rope

Lubricating for generators and machineries

W B Grease

Waste cotton

First Aid Kit (comprising of items like Bandaid, detol 100ml, iodin solution, antiseptic cream, scissor,cotton, bandage,burnol, spry etc complete)

Gas cutting hose pipe , 12 mm dia ( Red & Black )

Leather hand gloves

Arc welding mask

Gas cutting nozzle

Hacksaw blade 1.5" x 12 " ( double ended)

Nylon rope

R.J.ENTERPRISE