REPAIR TO JOINERY, ROOF, FLOORING, PLASTERING, TILLING, SANITARY FITTING AND OTHER B/R WORKS MD ACCN CHIBBER ENCLAVE, KALIMATA ENCLAVE AND 1 FOD COMPLEX UNDER AGE BR-I,GE (SOUTH) UDHAMPUR

Amount

Demolition of cement concrete (unreinforced) in ground floor and in paving any thickness (below or above ground level) complete all as specified and directed.

Demolition of Reinforced cement concrete of any discription and in any position not otherwise specifically provided complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed.

15 mm thick rendering on fair faces of brick/concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

Rendering 10 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement complete all as specified and directed.

15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and fair to receive tiles without using extra cement complete all as specified and directed.

Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

25 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in floor and finished even and fair complete all as specified and directed.

Non-skid coloured ceramic tiles (square/ rectengular) 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

Glazed ceramic coloured tiles in vertical surfacaes 300 x 600 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed and as approved by GE.

Granite slab 16 to 18 mm thick as in pillas, window cill, cooking platform and the like in cement mortar 1:4 including painting in white cement 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges complete all as specified and directed.

Preparation of surfaces and applying one coat of oil emulsion distemper on old decorated plastered surfaces of walls complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coat of oil emulsion distemper after preparation of surfaces complete all as specified and directed.

Preparation of surfaces and applying two coats of white wash on old plaster surfaces complete all as specified and directed.

Two coats of white wash on ceiling on newly plaster surfaces including preparation of surfaces complete all as specified and directed.

Preparation of surfaces and applying two coats of white wash on ceiling on old plaster surfaces complete all as specified and directed.

Preparation of newly plastered surfaces and applying two coats of weather proof exterior emulsion paint on walls complete all as specified and directed.

Preparation of old plastered surfaces and applying one coats of weather proof exterior emulsion paint on walls complete all as specified and directed.

Preparation of new/old surfaces on wall and applying a coat of wall putty (JK/Birla) to make the surface smooth and even complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs floor slabs and similar work not exceeding 200 mm thick finished rough complete all as specified and directed.

Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild Steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. Make : CERA/Prayag/Parryware

Supply only flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed.

PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Bib taps 15 mm bore, fancy type, cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Stop valve 15 mm bore, fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Angle cock ,cast copper aloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule and fixed wirh 15 mm bore pipe complete all as specified and directed.

Bib taps,cast copper aloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule and fixed wirh 15 mm bore pipe complete all as specified and directed.

Over head Shower rose 100 x 100 mm square shape single flow CP With gray face plate with rubit cleaning system screwed for iron pipe of 15 mm complete all as specified and directed.

CP Towel ring square with round flange complete all as specified and directed.

Corner glass self with brackets complete all as specified and directed.

Soap dish fancy type chromium plated fixed with brass screws and wooden/plastic cleats complete all as specified and directed.

Pillar taps 15 mm bore, chromium plated, Single lever basin Mxture without popup waste and 450 mm long braided hoses screwed for iron pipe of bore 15 mm complete all as specified and directed.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including a provision of concrete bedding complete all as specified and directed.

Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Vitreous China wash basin, white, flat back with pedestal, size 550 x 400 mm excluding tap, chain, plug but including brackets, waste fitting 32 mm dia ,brass chromimium plated for glazed ware sink, basin, with long screwed shanks and fly nuts flange, including PVC flexible pipe end bedded in red lead cement and other end fixed complete all as specified and directed.

Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia taking out from trenches or fixed to wall upto 110 mm complete all as specified and directed.

75 mm PVC (SWR) pipes single/Double socketed of any length with rubber ring joints pressure rating 4 kg/cm2 laid in trenches or floor etc complete all as specified and directed. Make : Prince/Paras Kisan/supreme

110mm PVC (SWR) pipes single/Double socketed of any length with rubber ring joints pressure rating 4 kg/cm2 fixed to wall incl clamp etc complete all as specified and directed.

75 mm PVC (SWR) pipes single length with rubber ring joints pressure rating 4 kg/cm2 fixed to wall in clamp etc complete all as specified and directed.

75 mm bore PVC SWR bends and fixed with joint sealent etc complete all as specified and directed.

110 mm bore PVC SWR bends and fixed with joint sealent etc complete all as specified and directed.

75 mm bore PVC (SWR) junction single, (single) equal or unequal with access door etc complete all as specified and directed.

75 mm bore PVC (SWR) junction double, (double) equal or unequal with access door etc complete all as specified and directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15 mm complete all as specified and directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 20 mm complete all as specified and directed.

Steel water tubing of nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

Steel water tubing of nominal bore 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed or open in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

Dismantling water tanks and exceeding 250 and not exceeding 500 ltr capacity and removing to store complete all as specified and directed.

Rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres including all accessories complete all as specifed and directed.

Ball brass valve high pressure with polythene float and fly nut complete of size 20 mm complete all as specified and directed.

Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and directed.

Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore complete all as specified and directed.

Cast Iron floor trap with dia of outlet 75 mm with CI grating including jointing to waste pipe cement concrete PCC 1:2:4 type B-1 (using 20mm grade crushed aggregate) complete all as specified and directed.

Coloured chequered cement concrete tiles 300 mm x 300 mm x 25 mm thick, Ruberised Dazle finish machine pressed; set, jointed and pointed in neat cement slurry, with grey cement and pigment in floors complete all as specified and directed.

20 mm Screed bed or bedding layer in cement mortor 1:4 for laying floor finishes etc complete all specified and as directed.

100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

Cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as, copings, benching and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnectingnd refixing in position exceeding 250 and not exceeding 500 ltr capacity complete all as specified and directed.

Primining the roof surface with bituminous primer @ .4 litre/sqm and applying a coat of semi hot blown 85/25 grade bitumen @1.2 kg/sqm and thereafter supply and laying polymeric membrane, five layered, weight not less than 3 kg per sqm with centre layer core of 90 micron high molecular density polythylene film and bonded completely to the surface with overlap of 10 cm (overlap tothe thermo fused by flame) follwed by another coat of semi hot blown 85/25 grade bitumen @ .7kg/sqm blinded with fine sand in dry condition @.5 kg/sqm complete all as specified and directed. Note : water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five year warranty of any effect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing is executed by engaging local labour.

Supply only integral water proofing compound complete all as specified and directed.

Mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; cup board ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

Drapery rod of 25 mm dia powder coated decorative along with brackets and end caps of quality as approved and complete all as specified and directed by GE.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed.

Taking down shutters of any description not exceeding 1 square metre and removing to store complete all as specified and directed.

Taking down shutters of any description exceeding 1 square metre but not exceeding 2 square metre each complete all as specified and directed.

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing complete all as specified and directed.

Factory made solid panel PVC Moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Clause No. 8.B.1 to 8.B.10 and drawing on page No. 156 & 157 of MES SSR-2010 Part-II complete all as specified and directed.

Pressed steel frames for doors made out of 1.25 mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, 12 mm bar threshhold etc. complete, of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

Pressed steel frames for doors made out of 1.25 mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, 12 mm bar thresh hold etc. complete, of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

35 mm thick factory made, 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and directed.

Aluminium alloy, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed.

Aluminum handles cast type, anodised, 150 mm size complete all as specified and directed.

Mild steel, 150 mm, ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed.

75 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

18/19 mm thick block boards grade 2 quality enterior grade, Commercial type fixed with screw or Steel fram/Timber frame including teak wood lipping, 6 mm thick fixed with Nail complete all as specified and directed.

100 mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and directed.

100 mm aluminium handles, cast ype anodised complete all as specified and directed. (ISI Mark)

0.9 mm thick decorative laminate type-1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructuions complete all as specified and directed.

Ball catches with 8 mm dia steel balls and brass body and striking plate including letting in and fixed complete all as specified and directed.

Steel window (box type) with gaused shutter factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/ 2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

All as per ser item No 91 but without glazing bar complete all as specified and directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269 /2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid for separately.

Factory made mild steel ventilators box type (glazed and gaused) with upper top hung shutters and bottom fixed type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer complete all as specified and directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302 /2009 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid for separately.

Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass panes (any thickness, size quality or description) from wooden frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Preparation of new steel and iron surfaces of any discription exceeding 10 cm width or girth, not otherwise described and applying two coat of red oxide zinc chrome primer complete all as specified and directed.

Preparation of old steel and iron surfaces of any discription exceeding 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of new wood or wood based surfaces of any discription not otherwise described exceeding 10 cms width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Preparation of old painted wood or wood based surfaces exceeding 10 cms width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

vijay constrction co

RAMAN CONSTRUCTION CO

SODHI TRADING CORPORATION

ashok kumar

VIRINDER SINGH