Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.3 LAccepted-AOC 3RD FLOOR BHAKTAMAR RESIDENCY SOMNATHNAGAR ROAD PUNE 411014 | PUNE | PUNE | MAHARASHTRA | 411014 | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹13.8 L+₹52,954.40 (3.99%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹14.8 L+₹1.5 L (11.4%)Rejected-Finance 24 25 MANGAL ARCADE TELCO ROAD OPP HOTEL DOUBLE TREE MOHAN NAGAR CHINCHWAD PUNE 411019 | PUNE | MAHARASHTRA | 411019 | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹16.2 L+₹3.0 L (22.5%)Rejected-Finance | L4 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 5 | L5₹19.3 L+₹6.1 L (45.8%)Rejected-Finance SADASHIV PHUGE NAGAR OPP SANDVIK FACTORY RADHIKA RESIDENCY F WING FLAT NO 7 PHUGEWADI PUNE 411 012 | PUNE | MAHARASHTRA | 411012 | L5 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
Refer Docs
EMD Value
₹51,000
Closing Date
23 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MH AND RH KIRKEE
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Kirkee Pune 411003
IMPROVEMENT TO POWER FACTOR CORRECTION AND PROVN OF WATER SUPPLY AT BLDG NO T35 AT AUNDH UNDER GE MH AND RH KIRKEE
2022_MES_571600_1
8363/E8
Open Tender
Electrical and Maintenance Works
Item Rate
330 days
GE MH AND RH KIRKEE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MH AND RH KIRKEE
₹51,000
23 Feb 2023
27 Dec 2022
25 Jan 2023
27 Dec 2022
23 Jan 2023
11 Jan 2023
27 Dec 2022 - 16 Jan 2023
Amount
Supply, install, testing and commissioning of automatic power factor correction panel in repair of capacity 100 KVAR working on 415 volt, 50 hz AC supply, 3 phase, floor mounting cubical design, factory fabricated, made out of 2 mm thick CRCA sheet, CPRI approved, duly painted with poweder coating with Pure Polyester Powder coated,40 microns as per IS 13871 1993(2002) dust and vermin proof, provn for ventilation, angle iron frame support and base frame 100 mm hight. Suitable size to accomodate the items mentioned below and having seperate compartment /chambers for cable gallery busbar, switch gear etc complete all as specified and comprising of following:-
Copper bus bar of rating 200 Amps per Phase and 200 Amps per Nuetral -1 Set.
APFC Relay,16 Stages Microprocessed based suitable for 415V, 3 phase, AC supply - 01 No. Make - L&T/ Syntron/Sycon
Phase indicating lamp (Red, Yelow, Blue) - 01Set
Capacitor On/ Off Indicating lamp LED type and push buttons- 12Sets Make: Teknic/L&T/C&S
Control wiring with1.5/ 2.5Sqmm flexible copper conductor - 01Job
Exhaust fan (Heavy duty)230V, AC, 100mm sweep with timer control - 02Nos
2core 2.5Sqmm copper cable from LT panel to APFC relay - 30 RM
CT Ratio 200/ 5 Amp - 01no for existing LT panel board
Power wiring from bus bar to MCB and MCB to Capacitor bank with suitable size of copper conductor cable of 2.5/4/6/10Sqmm as required.
Capacitor Bank,MD XL type,415,50Hz,AC supply (Make:L&T/NeptuneDucati/Mehar/Siemens/Schneider) (i)50KVAR--01Nos. (ii)25KVAR--01Nos. (iii)15 KVAR--01Nos. (iv) 5KVAR--02 Nos.
MCB,TP,D curve,415Volts,10kA Make: ABB/Siemens/Legrand (i)100Ampe--01Nos. (ii)60Amps--01Nos (iii)32Amps--01Nos. (iv)10Amps--02No.
Power Contactors with 2NC +2NO,3pole,415Volts,50Hz AC supply Capacitor duty MOC type of L&T Make or equivallent in C&S/Siemens suitable for following capacity of capacitors :- (i) 50 KVAR --01Nos. (ii ) 25 KVAR --01Nos. (iii)15 KVAR --01Nos. (iv)5 KVAR --02Nos.
Supply, install, testing and commissioning of automatic power factor correction panel in repair of capacity 150 KVAR working on 415 volt, 50 hz AC supply, 3 phase, floor mounting cubical design, factory fabricated, made out of 2 mm thick CRCA sheet, CPRI approved, duly painted with poweder coating with Pure Polyester Powder coated, 40 microns as per IS 13871 1993(2002) dust and vermin proof, provn for ventilation, angle iron frame support and base frame 100 mm hight. Suitable size to accomodate the items mentioned below and having seperate compartment /chambers for cable gallery busbar, switch gear etc all as specified and comprising of following:-
Copper bus bar of rating 400 Amps for Phase and 200 Amps for Nuetral -1 Set.
APFC Relay,16 Stages Microprocessed based suitable for 415V, 3 phase, AC supply - 01 No. Make - L&T/ Syntron/Sycon
Phase indicating lamp (Red, Yelow, Blue) - 01Set
Capacitor On/ Off Indicating lamp LED type and push buttons- 12Sets Make: Teknic/L&T/C&S
Control wiring with1.5/ 2.5Sqmm flexible copper conductor - 01Job
Exhaust fan (Heavy duty)230V, AC, 100mm sweep with timer control - 02Nos
2 core 2.5 Sq mm copper cable from LT panel to APFC relay - 30RM
CT Ratio 400/ 5 Amp - 01no for existing LT panel board
Power wiring from bus bar to MCB and MCB to Capacitor bank with suitable size of copper conductor cable of 2.5/4/6/10Sqmm as required.
Capacitor Bank,MD XL type,415,50Hz,AC supply Make:L&T/NeptuneDucati/Mehar/Siemens/Schneider (i)50KVAR--01 Nos. (ii)25KVAR--03 Nos. (iii)12.5 KVAR--02 Nos.
MCB,TP,D curve,415Volts,10kA. Make: ABB/Siemens/Legrand (i)100AmpS-01Nos. (ii)60Amps--03 Nos (iii)32Amps--02 Nos.
Power Contactors with 2NC +2NO,3pole,415Volts,50Hz AC supply Capacitor duty MOC type Make : L&T or equivallent in C&S/ Siemens suitable for of following capacity of capacitors :- (i)50 KVAR --01Nos. (ii ) 25 KVAR --03 Nos. (iii)12.5 KVAR-02Nos.
Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.
Excavating in trenches not exceeding 1.5 m wide and n.exc 1.5 m depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. or for cable laying and getting out in soft / loose soil complete all as specified and as directed.
Returning, filling, incl spreading levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed by Engr-in-Charge.
Removing excavated material to distance not exc 50m and depositing where as directed at a level not exc 1.5m above the starting point all as specified and directed by Engr-in-Charge.
Supplying & laying in trenches 25 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and directed by Engr-in-Charge.
Cutting existing GI tubing 50mm including threading as required and insertation of after taking down old existing GI pipe 50mm in position including excavation relaying and refilling and relaying refilling the same complete all as specified and directed by Engr in charge.
S&F 25mm dia gun metal gate valve with iron wheel head screwed both ends ISI marked fixed to GI pipe including removing old unserviceable one complete all as specified .
Mahindra Electric Stores
metro electrical services
Star Electrical
M/S kirpan Enterprises
Aziz Traders
DIVYA ELECTRIC CORPOORATION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .