Certain repair/replacement of rewiring and fittings/fixture OTM Accn at Armd Regt, Med Regt and ASC Bn under GE (East) Ferozepur Cantt

Amount

Taking down carefully existig copper/ alumn point wiring for light/ fan/ bell/ socket 5/15 Amp points complete with fitting and fixtures such as Switches, Sockets, Ceiling Rose, Lamp Holder and bracket fittings with Battens/ Conduits/ Wires and making good the disturbed surfaces of walls and roofs etc to match with existing surface complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards (single phase or three phase) of any capacity with Isolators/ MCBs/ MCCBs complete all as specified and directed.

Taking down carefully old unserviceable sub main wiring and making good disturbed surfaces and matching with existing complete all as specified and directed

M&L Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets and various sizes hylam sheets for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified and directed for following :- (a) One light/ fan/ bell/ Bldg security light point controlled by one single pole one way switch.

All as per item No. 04 as above but one 3 pin, 5 Amp, socket outlet on the independent board controlled by one single pole one way switch board complete all as specified and directed.

All as per item No. 04 as above but one 3 pin, 5 Amp, socket outlet on the same board controlled by one single pole one way switch board complete all as specified and directed.

All as per item No. 04 as above here-in-before but wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

All as per item No. 04 as above here-in-before but wiring with 4 sqmm copper cable and 4 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

All as per item No 04 above but existing conduit and existing Ms pressed steel/ cast iron box complete all as speicifed and directed. (a) One light point/fan/bell point controlled by one single pole one way switch.

All as per item No - 05 above but existing conduit and existing Ms pressed steel/ cast iron box complete all as specifed and directed.

All as per item No - 07 above but existing conduit and existing Ms pressed steel/ cast iron box complete all as specifed and directed.

S&F switch piano flush type, 5 Amp, single pole, one way, 240 volts complete all as specified and directed.

S&F Bell push switch piano flush type, 5 Amp, single pole, one way, 240 volts complete all as specified and directed.

S&F socket outlet flush type 3 pin 5 Amp ISI marked complete all as specified and directed.

S&F Switch piano flush type, 15 Amp, single pole, one way, 240 volts complete all as specified and directed.

S&F socket outlet flush type 2-in-1, multipurpose, 3 pin 5 Amp and 3 pin 15 Amp, 240 volts complete all as specified and directed.

S&F Ceiling rose surface type, 240 volts, 50 Hz, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F Lamp holder , 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed.

S&F rotary Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, white in colour, duly ISI marked complete all as specified and directed.

S&F in replacement switch piano flush type, 5 Amp, single pole, one way, 240 volts complete all as specified and directed.

S&F in replacement Bell push switch piano flush type, 5 Amp, single pole, one way, 240 volts complete all as specified and directed.

S&F in replacement socket outlet flush type 3 pin 5 Amp ISI marked complete all as specified and directed.

S&F in replacement Switch piano flush type, 15 Amp, single pole, one way, 240 volts complete all as specified and directed.

S&F in replacement socket outlet flush type 2-in-1, multipurpose, 3 pin 5 Amp and 3 pin 15 Amp, 240 volts complete all as specified and directed.

S&F in replacement Switch Socket combination 2 in 1, 6 pin 5 Amps and 15 Amps flush type universal, 240 volts complete all as specified and directed.

S&F in replacement ceiling rose surface type, 240 volts, 50 Hz, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F in replacement Lamp holder , 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed.

S&F in replacement rotary Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, white in colour, duly ISI marked complete all as specified and directed.

S & F in repair Modular Switch one way 6 A, 1 module complete all as per specified and directed.

S&F Modular Bell push 6 Amps, one module, 240 volts complete all as specified and directed.

S & F in repair Modular Switch one way 16 A, 1 module complete all as per specified and directed.

S & F in repair Modular Socket, 6A - 2/3 pin combined 2 module complete all as per specified and directed.

S & F in repair Modular Socket, 6A/16A - 2/3 pin combined 2 module complete all asper specified and directed.

S&F Modular ceiling fan regulator electronic stepped type heavy duty 120W, 230 volts flush type complete all as specified and directed.

S & F in repair Modular white cover plate including GI box inner, 4 module complete all as per specified & directed.

S & F in repair Modular white cover plate including GI box inner, 6 modulecomplete all as per specified & directed.

S & F in repair Modular white cover plate including GI box inner, 8 module complete all as per specified &directed.

S&F 20W, 6500K, 4 feet LED tube light fitting, energy efficient, 240 volts, fixed on wall/ ceiling etc complete all as specified and directed.

S&F in replacement 20W, 6500K, 4 feet LED tube light fitting, energy efficient, 240 volts, fixed on wall/ ceiling etc complete all as specified and directed.

Fixing only LED tube light fitting any type any size retrieved from taking down wiring all as specified and directed.

S&F LED bulb of 9 watt, B22 base, 6500K all as specified and directed.

S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified and directed.

S&F LED sleeky bldg security light (Lens) fitting of 35 watts, 6000K, including suitable size bracket bend to shape complete with nuts and bolts of suitable size, duly painted with two coats of synthetic enameled paint and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire of size 23/00.0076 complete all as specified and directed.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S. sheet, powder coated, partly embedded in wall, IP-43 protection, VTPN DB with 200 Amps rated bus bar, 4 way, 415 volts, vertical type, dust and vermin proof, suitable for incorporation of MCCBs/ MCBs, factory made and making good distrubbed surfaces with matching colour, complete all as specified and directed.

S&F Factory made sheet metal enclosures double door type made out of CRCA M.S sheet, powder coated, SPN DB with 200 Amps rated bus bar, 8 way, IP-43 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly partially immersed in wall, factory made, including making good distrubbed surfaces with matching colour, complete all as specified and directed.

S&F Factory made sheet metal enclosures double door type made out of CRCA M.S sheet, powder coated, SPN DB with 200 Amps rated bus bar, 12 way, IP-43 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly partially immersed in wall, factory made, including making good distrubbed surfaces with matching colour, complete all as specified and directed.

S&F MCCB thermal based release adjustable type 4 pole 100 Amps 50 Hz 415 Volts with rupturing capacity 16 KA including testing, complete all as specified and as directed.

S&F MCB SPN, 40A-63A, 240 volts, 10KA , complete all as specified and directed.

S&F MCB SP, 6A-32 Amps, 240 volts, 10KA complete all as specified and directed.

S&F MCB TPN 40-63 Amps 10 KA 415 Volts complete all as specified and directed.

S&F Sub main wiring with two single core 2x6 sqmm PVC FRLS insulated and unsheathed stranded copper conductor alongwith PVC FRLS earth wire 6 sqmm drawn in 25 sqmm PVC rigid conduit connected to main board complete all as specified and directed. Note : (Two number cable and one number earth wire along with PVC conduit shall measured together as unit length).

S&F Sub main wiring with two single core 2x6 sqmm PVC FRLS insulated and unsheathed stranded copper conductor alongwith PVC FRLS earth wire 6 sqmm drawn in existing steel/ PVC rigid conduit connected to main board complete all as specified and directed. Note : (Two number cable and one number earth wire shall measured together as unit length).

S&F Sub main wiring with two single core 2x4 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 4.0 sqmm drawn in 25 sqmm PVC rigid conduit connected to main board complete all as specified and directed. (Two number cable and one number earth wire alongwith PVC conduit shall measured together as unit length).

S&F Sub main wiring with two single core 2x4 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 4.0 sqmm drawn in existing steel/ PVC rigid conduit connected to main board complete all as specified and directed. (Two number cable and one number earth wire shall measured together as unit length).

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply & Fixing LED Post top latern light 20 Watt 230V AC Outdoor Type with high pressure die cast aluminum spigot, spun, aluminium powder coated top cover, aluminium PDC heat sink complete with driver, lamp bracket, opal PC diffuser and clear acrylic with IP 65 protection complete all as specified and directed.

Supply & fixing in repair 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as per specified & directed.

Supply & fixing in repair 2.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor complete all as per specified & directed.

S&F in repair bakelite sheet hylam 3mm thick with white top fixed with cup washers with machine screws on existing switch board with including removing existing switch/ switch sockets/ bell push etc and refixing the same by making slots on new sheet complete all as specified & directed for MS box fo approx size 8" x 5" etc as in reapirs complete all as specified and directed.

All as per item No 60 but of size 11'' x 9", complete all as specified and directed.

S&F in repair PVC Shunken Box rectangular block for mounting normal/modular switches, sockets, fan regulator etc of sizes 175mmx110mmx50mm, complete all as specified and directed

All as per item No 62 but of size 200 x 150 x 50 mm, complete all as specified and directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of size 10 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular of 10 Sqmm complete all as specified and directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of 16 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular of 16 Sqmm complete all as specified and directed.

S&F in repairs of sheet metal enclosures 230 V single pole and earth enclosure with two pin & earth plug with socket complete including single pole MCB 20 Amps complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm. complete all as specified and directed.

Supply and fix in repair , exhaust fan ,steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers in wall opening complete all as specified and directed by Engr in charge.

S & F in repair LED Driver for LED Bldg security light upto 36 W including all conection and suitable size of copper wire complete all specifed and directed.

S & F in repair LED Driver for LED luminaire 600 mm x 600 mm, 35/36 watt including all conection and suitable size of copper wire complete all specifed and directed.

Supply & fixing in repair Capacitor (ISI Marked) 2.5 mfd complete all as specified and directed by Engr-in-Charge.

M&L in repairs Earthing complete with galvanished earth plate electrode of size 600 x 600 x 6.00 mm buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and galvanised iron or steel including earth work in any type of soil, GI funnel with GI mesh charcoal salt 15cm alternate layer and around the earth plate as shown in electrical plate no 3 of SSR Part I 2009, 20 mm dia watering pipe medium grade 1.70 mtr long GI protection pipe light grade 15mm dia from earth pit to main board including necessary pit 1:3:6 of RCC 1:2:4 type B1 re-inforced with 6mm MS bars centre to centre, 10mm dia handle, complete all as specified and as directed.

Note: The work is of maintenance nature, minor repair shall be carried out and paid in relevant items irrespect of complete rewiring as directed

V R TRADERS (BID ID -3502702)

M/s Kissan Engineering Works (BID ID -3497757)

B.L. Chaudhri and Co. (BID ID -3499219)

Bhupindra Traders (BID ID -3497833)

AKASH ELECTRICALS (BID ID -3500553)

M/S N Maini Constrution (BID ID -3500076)

M/s Manoj Construction Co. (BID ID -3502263)