Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.7 LAccepted-AOC | L1 | Accepted-AOC Lowest and reasonable | |
| 2 | L2₹27.3 L+₹57,410.50 (2.15%)Rejected-Finance VILLAGE DEVRATHA NO 1 POST SHAHGANJ DIST AGRA U P | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹27.8 L+₹1.2 L (4.35%)Rejected-Finance 1006 MANAK CHOUK MHOW DIST INDORE MADHYA PRADESH453441 | INDORE | INDORE | MADHYA PRADESH | 453441 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹27.9 L+₹1.2 L (4.53%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹28.6 L+₹1.9 L (7.21%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
Refer Docs
EMD Value
₹77,600
Closing Date
9 Nov 2020, 6:00 pmClosed
CWE Mhow
HQ CWE Mhow Cantt Mhow 453441
SPECIAL REPAIR TO ROADS IN HC MD ACCN AND ALLIED AREA AT ARMY WAR COLLEGE MHOW UNDER GE AWC MHOW
2020_MES_378842_1
CA No CWE/Mhow/13(T) OF 2020-21
Open Tender
Civil Works - Roads
Item Rate
120 days
HQ CWE Mhow
Please refer tender documents
9 documents required · 9 mandatory
₹500
Yes
GE AWC Mhow
₹77,600
Yes
31 Dec 2020
18 Sept 2020
11 Nov 2020
18 Sept 2020
9 Nov 2020
7 Oct 2020
Amount
Scarifying or picking graveled macadam or bituminous macadam surfaces in area n. exc 400 sqm and depth exc 50mm but n. exc 100 mm depth and and removing to a distance not exc 50M and all materials thrown from site etc complete all as specified and directed
Screening road metal, chippings, etc. on the site of the work, when specially ordered, including removing screened materials clear of screen and stacking in separate heaps for measuring (Materials from both sides of screen measured) complete all as specified and directed
M&L for 75 mm thick (Compacted thickness) in , WBM, with granite trap or basalt coarse aggregate of grading 2 (63 to 40 mm size) spread, levelled, rolled with 08 to 10 tonne power roller and consolidated to required gradient and camber complete all as specified and directed.
Material and labour for Repair to pot holes any depth, not exc 1 sq.m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, but making good by appling tack coat at 5 Kg per 10 sq.m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq.m, blinded with 0.09 cu.m of stone chipperings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). Depth of potholes exc 30 mm complete all as Specified and directed
Ditto all as per item No 03 above but except materials (Serviceable materials obtained from item No 02 above will be reused.
Material and labour for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber up to outer edges of roads on existing black top surfaces complete all as specified and directed. NOTE: - (i) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.
Preparing the black top surfaces of roads by brushing with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clear the surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with paving bituminous primer VG- 30 at the rate of 5 kg per 10 sqm and applying Material and labour for premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber all as specified and directed. Note: - Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (Note :- Mix shall be obtained from hot mix plant and spreading shell be done by using mechanical paver only).
Preparing the unsurfaces WBM of roads by brushing with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clear the surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with paving bituminous primer VG- 30 at the rate of 10 kg per 10 sqm and applying Material and labour for premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber all as specified and directed. Note: - Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (Note :- Mix shall be obtained from hot mix plant and spreading shell be done by using mechanical paver only).
Material and Labour for marking lines, dashes, arrows, letters etc. exceeding 10 cm wide on bituminous/concrete pavemnt/path surface with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per sqm area confirming to MOST & BIS specification, not less then 2mm thick of white/golden/yellow as approved colour/shade and applied with machine, as per manufacturer's instructions including preparation of surface complete all as specified and directed. (Make- Shalimark of STP Ltd or M/S Kataline Infra Products Pvt Ltd or equivalent as approved by GE) Note:- The rate included for provision of red signals to keep off traffic from wet paint, cleaning road surfaces and working during odd hours when traffic is light.
S&F in CAT EYE (Road stud) oval shap of 100mm x 90mm x19mm made of polycarbinate moulded body with electronically welded prismatic retro lange on both sides for maximum retro reflection in wet and dry condition to be fixed with 3M bituminous adhesive BT-69 complete all as specified and directed. (Make - Sun Eyes/Birla3M/Dark Eye/Oscar road safety/Stimsonite)
S & F Red colour super quality solar Stud aluminium alloy and PC construction Solar powered by monocrystal solar panel type of battery one high capacity Ni-Cd rechargable battery view distance apprx 1000mts LED -O10mm, 3 pieces each side and total 6 pieces are used for high brightness of defferent colours ,back up 12 hrs of continuous lighting at night complete and specified as per manufacturers instructions . (Make- SUN EYEZ Road Safety Products /3M/ M/s Oscar road safety) (Note- Colour and design shall be approved by GE)
Demolition of brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.
M & L for brick work with fly ash bricks using modular size bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 all as specified and directed . (Note :- weep holes shall be provided during execution of work as directed.)
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M & L for rendering 15mm thick in CM 1:4 on any faces of brick wall and finish the surfaces even and smooth without using extra cement complete all as specified and directed .
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M & L for PCC (1:4:8), type D-2, using 40mm graded stone aggregate in foundation mass concrete and filling complete all as specified and directed.
Demolition of stone slab dry & pointed of any description or thickness as in floors ,approns ,path etc complete all as specified and directed.
M&L for 60 mm thick machine prestressed precast concrete Interlocking paver block (glossy finished) with grey cement with pigment confirming to IS 15658-2006 of M-30 grade , laid dry & joints filled with fine sand & size, shape colour and pattern as approved by GE, laid over and including 30 mm thick stone dust / sand cushioning filling ,with complete all as specified & directed.
Demolition of stone sett paving of any description or thickness laid, bedded and pointed in any mortar. complete all as specified & directed.
M&L for lime or stone kerb of roughly squared stones of size 15cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush complete all as specified & directed.
M/s M S Sharma and Co.
Narayandas Phoolchand Mishra Infrastructures Pvt. Ltd.
Bharadwaj Builders
M/S UnitedConstruction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .