Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.3 LAccepted-AOC DHANGU ROAD PAHTANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | ₹19.3 L Quoted ₹19.6 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹22.6 LRejected-Finance | ₹22.6 L | L2 | Rejected-Finance Other than lowest |
| 3 | L3₹22.9 LRejected-Finance | ₹22.9 L | L3 | Rejected-Finance Other than lowest |
| 4 | L4₹23.1 LRejected-Finance | ₹23.1 L | L4 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | M/S INDAN FURNITURE MART L1 | om parkash and sons L2 | vivek and co L4 | BALWINDER SINGH AND SONS L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Almirah Steel Small Removing the unserviceable lock of Almirah steel small (FD 67/1032) and tightening of loose parts of the locking device and supply and fix new brass lock 7 lever with duplicate keys all as specified and shown on drawing.
Note for item NO 01 to 77:- One coat of red oxide primer and one coat of synthetic enamel paint shall be applied to each of changed steel part. | 100 | Each | 150 ₹15,000 | 150 ₹15,000 | 77 ₹7,700 | 120 ₹12,000 |
| 2.00 | Removing the existing unserviceable 3 way locking device of Almirah steel med (FD 67/1032) supply and fix new locking device with necessary fittings all as specified and as directed | 60 | Each | 50 ₹3,000 | 50 ₹3,000 | 140 ₹8,400 | 100 ₹6,000 |
| 3.00 | Removing the existing unserviceable handle of Almirah steel small (FD 67/1032), supply and fix 100 mm size new chromium plated mild steel handle of approved quality all as specified and shown on drawing. | 130 | Each | 70 ₹9,100 | 50 ₹6,500 | 77 ₹10,010 | 50 ₹6,500 |
| 4.00 | Removing the existing unserviceable leg, supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted of Almirah steel med (FD 67/1032) all as specified and as directed | 40 | Each | 180 ₹7,200 | 250 ₹10,000 | 104 ₹4,160 | 350 ₹14,000 |
| 5.00 | Removing the existing unservicable/rusted door shutters (both) of almirah steel med (FD 67/1032), supply and fix new door shutter both made of 1mm thick CRCA sheet complete all as specified and shown on drawing. | 20 | Each | 210 ₹4,200 | 500 ₹10,000 | 203 ₹4,060 | 650 ₹13,000 |
| 6.00 | Removing the exisiting unserviceable shelves of Almirah steel medium (FD-67/1032), supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/ riveted all as specified and directed. | 20 | Each | 200 ₹4,000 | 250 ₹5,000 | 140 ₹2,800 | 450 ₹9,000 |
| 7.00 | M&L for removing the existing dents/bends of Almirah steel med (FD 67/1032) and preparation of old painted steel sufaces by scraping with emery paper, cleaning, de-rusting and making the surface smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint with spray gun of olive green shade both inside and outside complete all as specified and directed. | 460 | Each | 280 ₹1.3 L | 350 ₹1.6 L | 320 ₹1.5 L | 380 ₹1.7 L |
| 8.00 | Almirah Steel Large Removing the unserviceable lock of Almirah steel large (FD-67/ 1031) and tightening of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown on drawing. | 100 | Each | 150 ₹15,000 | 150 ₹15,000 | 77 ₹7,700 | 120 ₹12,000 |
| 9.00 | Removing the existing unserviceable 3 way locking device of Almirah steel large (FD-67/1031)supply and fix new locking device with necessary fittings all as specified and as directed | 60 | Each | 50 ₹3,000 | 50 ₹3,000 | 140 ₹8,400 | 120 ₹7,200 |
| 10.00 | Removing the existing unserviceable handle of Almirah steel large (FD-67/1031), supply and fix 100 mm size new chromium plated mild steel handle of approved quality all as specified and shown on drawing. | 90 | Each | 70 ₹6,300 | 50 ₹4,500 | 77 ₹6,930 | 50 ₹4,500 |
Updated dates
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
12 Mar 2026, 6:00 pmClosed
Garrison Engineer, Gurdaspur.
Garrison Engineer, Gurdaspur (Tibri)
Repair of steel furniture at Tibri Mil Stn under GE Gurdaspur.
2026_MES_752226_1
GE GSR-95/2025-2026
Open Tender
Civil Works
210 days
Garison Engineer
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE Gurdaspur
₹80,000
4 Jun 2026
11 Feb 2026
19 Mar 2026
11 Feb 2026
12 Mar 2026
26 Feb 2026
Almirah Steel Small Removing the unserviceable lock of Almirah steel small (FD 67/1032) and tightening of loose parts of the locking device and supply and fix new brass lock 7 lever with duplicate keys all as specified and shown on drawing. Note for item NO 01 to 77:- One coat of red oxide primer and one coats of synthetic enamel paint shall be applied to each of changed steel part shall be applied.
Removing the existing unserviceable 3 way locking device of Almirah steel med (FD 67/1032) supply and fix new locking device with necessary fittings all as specified and as directed
Removing the existing unserviceable handle of Almirah steel small (FD 67/1032), supply and fix 100 mm size new chromium plated mild steel handle of approved quality all as specified and shown on drawing.
Removing the existing unserviceable leg, supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted of Almirah steel med (FD 67/1032) all as specified and as directed
Removing the existing unservicable/rusted door shutters (both) of almirah steel med (FD 67/1032), supply and fix new door shutters both made of 1mm thick CRCA sheet complete all as specified and shown on drawing.
Removing the exisiting unserviceable shelves of Almirah steel medium (FD-67/1032), supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/ riveted all as specified and directed.
M&L for removing the existing dents/bends of Almirah steel med (FD 67/1032) and preparation of old painted steel sufaces by scraping with emery paper, cleaning, de-rusting and making the surface smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint with spray gun of smoke grey shade both inside and outside complete all as specified and directed.
Almirah Steel Large Removing the unserviceable lock of Almirah steel large (FD-67/ 1031) and tightening of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown on drawing.
Removing the existing unserviceable 3 way locking device of Almirah steel large (FD-67/1031)supply and fix new locking device with necessary fittings all as specified and as directed
Removing the existing unserviceable handle of Almirah steel large (FD-67/1031), supply and fix 100 mm size new chromium plated mild steel handle of approved quality all as specified and shown on drawing.
Removing the existing unserviceable leg of Almirah steel large (FD-67/1031), supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted all as specified and as directed.
Removing the existing unservicable/Rusted door shutters (both),Almirah steel large (FD-67/1031) supply and fix new door shutters made of 1mm thick CRCA sheet complete all as specified and shown on drawing
Removing the existing unserviceable shelves of Almirah steel large (FD-67/1031) and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted all as specified and as directed.
M&L for removing the existing dents/bends of Almirah steel large (FD 67/1031) and preparation of old painted steel sufaces by scraping with emery paper, cleaning, de-rusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint with spray gun of smoke grey shade both inside and outside complete all as specified and as directed.
Locker Steel Removing the existing unserviceable handle of Locker steel (FD-1029), supply and fix 100 mm size new chromium plated steel handle of approved quality all as specified and shown on drawing.
Removing the existing unserviceable hasp & stapple of Locker steel (FD-1029), supply and fix new chromium plated steel hasp & stapple of approved quality and same size all as specified and shown on drawing.
Removing the existing unservicable/Rusted door shutters (both) of Locker steel (FD-1029), supply and fix new door shutters both made of 1mm thick CRCA sheet complete all as specified and shown on drawing.
Removing the existing unserviceable leg of a locker Steel (FD-1029), supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted all as specified and as directed.
M&L for removing the existing dents/bends of Locker steel (FD-1029), and preparation of old painted steel sufaces by scraping with emery paper, cleaning, de-rusting and making the surface smooth by applying putty/red oxide primer wherever required and applying two coat of synthetic enamel paint with spray gun of olive green shade of approved quality both inside and outside complete all as specified and as directed.
Table Dinning ORs Steel Removing the existing unserviceable/rusted stiffener of Table dinning ORs steel (FD-165 (R)) and fix 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame to match with original shape and position including minor repairs to the table complete all as directed.
Removing the existing unserviceable table top of Table dinning ORs steel (FD-165 (R)), supply and fix new top made of 18mm thick pre-laminated HDMR board walnut faced including provision of 4mm thick teakwood beading all around complete all as directed.
Supply and fix new PVC shoe suitable for the leg of Table dinning ORs steel (FD-165 (R) ) after removing the unserviceable shoe.
M&L for removing the existing rust of Table dinning ORs steel and preparation of old painted steel sufaces by scraping with emery paper, cleaning and making the surfaces smooth and applying one coat of synthetic enamel paint with spray gunof olive green shade of approved quality complete all as specified and as directed.
Table Office Officer/Clerk Steel Removing the existing unservicable/rusted drawer complete of Table office officer/clerk steel (FD-84/1003,1004) and supply and fix new drawer complete made of 1mm CRCA sheet all as specified and shown on drawing.
Removing the existing unserviceable/rusted stiffener of Table office officer/clerk steel (FD-84/1003,1004), supply and fix 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame all as directed.
Removing the existing unserviceable lock of Table office officer/clerk steel (FD-84/1003,1004) and supply and fix new lock of 6 levers with duplicate keys including removing dents and adjustment of locking device of drawers for smooth functioning complete all as specified and as directed.
Removing the existing unserviceable side panel of table' locker of Table office officer steel (FD-84/1003) and fix new locker made of 1mm CRCA sheet complete all as specified and as directed.
Removing the existing unserviceable table top of Table office officer steel (FD-84/1003), supply and fix new top made of 18mm thick pre-laminated HDMR board walnut faced one side teak face including provision of 4mm thick teakwood beading all around complete all as directed.
Removing the existing unserviceable table top of Table office clerk steel (FD-84)/1004) and fix new top made of 18mm thick pre-laminated HDMR board walnut faced one side teak face inculding provision of 4mm thick teakwod beading all around complete all as directed.
Supply and fix new PVC shoe suitable for the leg of Table office officer/clerk steel (FD-84/1003,1004) after removing the unserviceable shoe.
M&L for removing the existing rust of Table office officer steel (FD-84M/1003) by scraping with emery paper and applying one coat of synthetic enamel paint with spray gun olive green shade of approved quality complete all as specified and as directed.
M&L for removing the existing rust of Table office clerk steel (FD-84M/1004) by scraping with emery paper and applying one coat of synthetic enamel paint with spray gun of olive green shade of approved quality complete all as specified and as directed.
Table 900x600x760mm with and Without Drawer Removing the existing unserviceable table top of Table 900 x 600 x 760MM (FD-1007/1008) and supply and fix new top made of 18mm thick pre-laminated HDMR board walnut faced including provision of 4mm thick teakwood beading all around complete all as directed.
Supply and fix new PVC shoe suitable for the leg of Table 900x600x760MM (FD-1007/1008) after removing the unserviceable shoe.
Repair to broken drawer as per existing specifications complete all as shown on Drg (FD-1007/ 1008) and specified & directed.
M&L for removing the existing rust of Table 900 x 600 x 760MM and preparation of old painted steel sufaces by scraping with emery paper, cleaning, dedusting and making the surfaces smooth and applying one coat of synthetic enamel paint with spray gun of olive green shade of approved quality complete all as specified and as directed.
Table 900 x 900 x 760MM Removing the existing unserviceable table top of Table 900 x 900 x 760MM (FD-1009) and supply and fix new top made of 18mm thick pre-laminated pre-laminated HDMR board walnut faced including provision of 4mm thick teakwood beading all around complete all as directed.
Removing the existing unserviceable/rusted leg of Table 900 x 900 x 760MM (FD-1009) and supply and fix 25 x 25 x 1.6mm thick MS square pipe leg duly welded to the frame all as directed.
Supply and fix new PVC shoe suitable to the leg of Table 900 x 900 x 760MM (FD-1009) after removing the unserviceable shoe.
M&L for removing the existing rust of Table 900 x 900 x 760MM with emery paper and applying one coat of synthetic enamel paint of olive green shade of approved quality complete all as specified and as directed.
Table Bed Side (Steel) Removing old UNSV top of Table bed side (steel) FD/E6/ MAP/ 15 and S&F new top of 18mm thick pre-laminated HDMR board teak faced including provision of 4mm thick teakwood beading all around complete all as directed.
Removing old UNSV plywood from back of table bed side steel and S&F new 6mm thick playwood BWP.
Removing old UNSV telescopic channels of Table bed side steel FD/E6/MAP/15 and S&F new telescopic channels made of mild steel of 1.6 mm thick.
Removing old UNSV handles and S&F100 mm long powder coated metal alloy as approved by Engineer-in-charge.
Removing old UNSV square tube of Table bed side (steel) FD/E6/MAP/15 and S&F new 18mm square tube in each all as shown on drawing.
S&F of PVC Shoe of Table bed side (steel) FD/E6/MAP/15 suitable for the leg after removing the unserviceable shoes.
M&L for removing the existing rust of Table bed side (steel) FD/E6/MAP/15 with emery paper, and applying one coat of synthetic enamel paint of black shade of approved quality complete all as specified and as directed.
Chair Computer M&L for removing the existing damaged twin wheel casters from chair computer (FD/E6/MAP/01) and supply and fix new caster duly fixed to match with the existing all as specified and as directed.
M&L for repairs to seat from chair computer (FD/ E6/ MAP/ 01) and back of Chair providing new tepastry cloth and rubber foam. (Rate of cloth not less than @ 250/- per mtr) all as specified and directed.
M&L for removing unserviceable PVC arms rest supply from chair computer (FD/E6/MAP/12) and fix new PVC arms rest as to match with the existing all as specified and as directed.
M&L for removing the existing unserviceable PVC base for chair computer and S&F new PVC Base for Chair Computer of superior quality as to match with the existing all as specified and as directed.
M&L for removing the existing unserviceable Shocker for Chair Computer and S&F new shocker of superior quality as to match with the existing all as specified and as directed.
Chair Verandah M&L for removing the unserviceable conduit part from chair verandah (FD-256) frame and replace the same with new MS conduit 20mm bore,1.6mm thick, made to shape, duly welded all as directed.
M&L for removing of existing torn out/ unserviceable plastic cane from chair verandah (FD-256), prepare steel tubular frame surfaces of chair with emery paper for painting and apply two coats of synthetic enamel paint of white colour of approved quality and recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new PVC shoes of approved quality and colour all as directed.
Bed Hard Steel M&L for removing unserviceable plywood top from the bed hard steel and supply and fix new 12mm thick BWR phenol bonded commercial plywood on top of the bed all as shown on drawing and as directed.
M&L for all broken joints welding/fixing shall be done in accordance with standard workmanship and specification. All steel surfaces shall be paintted with 01 coat of black colour synethic enamel paint, complete all as specified and shown on drawing and directed by Engineer-in-Charge
Table Computer Godrej Removing old unserviceable top of Table Computer FD/E6/ MAP/03 dimensions as shown in drawing of 18mm thick pre-laminated HDMR BWR exterior grade particle board teak faced including provision of 4mm thick teakwood beading all around complete all as directed
Removing old unserviceable telescopic channels of Table bed side steel FD/E6/MAP/03 and S&F new telescopic channels made of mild steel of 1.6 mm thick.
Removing old unserviceable brass knob 25 mm dia of shape as approved by Engineer-in-charge
Removing old unserviceable PVC rectangular cover and providing new as shown in drawings.
M&L for PVC hard buffers rectangular to legs of table all as specified and shown in drawings.
Chair Tubular Steel with/without Arms Removing unserviceable seat frame of chair tubular steel with/without arms (FD-75 M) and supply and fix new seat frame made out of shisham wood french polished duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing as specified.
All as per ser No 62 herein before but back frame.
Removing broken handle from chair steel tubular with (FD-75M) and replacing with new handle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size to the chair frame all as shown on drawing and as directed.
S&Fof MS flat 25 x 25 x 4mm thick welded at four corner at bottom of the seat only to support from chair steel tubular with/ without arms (FD-75 M) .Screwed with the seat at two places complete and also applying one coat of synthetic enamel paint all as specified and shown in drawings.
Book Case Steel Removing the unserviceable lock of Book Case Steel FD-1028 and fix new brass lock 7 lever with duplicate keys all as specified and shown on drawing.
Removing the existing unserviceable handle of Book Case Steel FD-1028 and supply & fix 100 mm size new chromium plated mild steel handle of approved quality all as specified and shown on drawing.
Removing the existing broken Glass of Book Case Steel FD-1028 and supply & fix new plain glass of actual size 4 mm size thick of approved quality all as specified and shown on drawing.
M&L for removing the existing dents/bends of Book Case Steel FD-1028 and preparation of old painted steel sufaces by scraping with emery paper, cleaning, de-rusting and making the surface smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint with spray gun of olive green shade of approved quality both inside and outside complete all as specified and as directed.
Chair Writing Steel M&L for removing unserviceable arms rest of Chair Writing steel (FD/E6/MAP/12) and supply and fix new arms rest as to match with the existing all as specified and as directed
M&L for removing torn/worn out tepastry cloth of Chair Writing steel( FD/E6/MAP/12) and supply and fix new tepastry cloth and rubber foam (Rate of cloth not less than @ 250/- per mtr) including minor repairs all as specified and as directed.
Rack Steel 6 Tier Removing the existing unserviceable angle iron of Rack steel 6 tier closed type (FD-1038) and supply and fix new MS angle iron of size 30 x 30 x 3mm thick, 1915mm long including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer complete all as specified and shown on drawing.
Removing the existing unserviceable shelves of Rack steel 6 tier (FD-1038) and supply and fix new shelves of size 610 x 915mm made of 1mm CRCA sheet in appropriate size and shape including painting with one coat of synthetic enamel paint olive green shade of approved quality over a coat of primer complete all as specified and shown on drawing.
Material and labour of Rack steel 6 tier (FD-1038) for preparation of old painted steel sufaces by scraping with emery paper, cleaning, de-rusting and making the surfaces smooth and applying one coat of synthetic enamel paint of olive green shade of approved quality complete all as specified and as directed.
Rack Shoes Steel M&L for removing the unserviceable jali part of 18 guage from rack shoes (FD/E6/ Map-02 R) frame and replace the same with new MS jali all joint and fixing shall be done in accordance with standard workmanship/ specification made to shape, duly welded complete all as specified and directed.
M&L for Rack shoes FD/E6/ Map-02 R for preparation of old painted steel surfaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth and applying one coat of syhnthetic enamel paint of black shade of approved quality complete all as specified and directed.
Removing the existing unserviceable PVC shoes from Rack shoes and provide new suitable PVC shoes of approved quality and colour complete all as specified and directed.
A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit i.e Rs. 26,570.00 from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
95TenderDocuments.pdf
Tender Documents • 0.71 MB
BOQ_842520.xls
BOQ • 0.76 MB
Download all tender documents and submit your bid