01-Udaipur road par Divider nirman karya Dhariyawad.

As Per RUIDP SOR 2023

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 50 metres as directed by Engineer. Bituminous courses (RUIDP SOR 2023 ITEM NO. 2.10.1)

Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground /Road top level. In all types soild/saturated soil such as moorum, sand, sandy silt, black cotton soil, kankar, etc Depth upto 1.5 m (RUIDP SOR 2023 ITEM NO. 4.10.1.1)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size) (RUIDP SOR 2023 ITEM NO. 21.1.7)

Providing and fixing precast cement concrete M-20 grade (Using mechanical Concrete Mixer) kerb stone top and bottom width 115 and 165 mm respectively, 250 mm high on 150 mm thick PCC M-10 grade foundation as per design, including fixing at site as per clause 408 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. (RUIDP SOR 2023 ITEM NO. 10.1)

Earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m. (RUIDP SOR 2023 ITEM NO. 4.13)

Providing and laying un-reinforced, plain cement concrete mix with Concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints etc including all material, labour, machinery, lighting, guarding and maintenance of diversion. PCC M-20 (RUIDP SOR 2023 ITEM NO. 9.6.1)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work (RUIDP SOR 2023 ITEM NO. 32.49.1)