Construction of Semi Covered shed campus for Paddy Storage along with basic amenities of 12,000 MT Capacity in Survey No 9/2 and 11/1 to an extent of 5.45.0 Hectare at Vengacherry village in Uthiramerur Taluk in Kancheepuram District

Amount

CIVIL WORK

Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150 mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compound in places shown with initial lead of 10 mts and initial lift of 2 mts. Clearing, leveling the site, shoring, strutting, bailing of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and compacted with surface vibrator or earth rammer, consolidated including watering etc., complete complying with standard specification and as directed.

Supplying and filling in basement with wetmix 230mm thick for flooring and 200mm for road in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler,` vibratory roller all labour charges etc., complete complying with standard specification and as directed by the departmental officers.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including mixing by mechanical means de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Providing and laying in position, Standardised Concrete Mix M15 Grade in accordance with IS:456-200 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/M3 and maximum water cement ratio of 0.55, including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improvement workability without impairing strength and durability with about (5 Cu.m) 7730 Kg of 20mm machine crushed stone jelly and with about (3.3 Cum)5156 kg of 10-12mm machine crushed stone jelly and with about (4.7 Cum) 7670 kg of sand, but excluding cost of reinforcement grill fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, cutting etc., Placing of concrete and surface hardner finishing with power floated and power trawler to obtain the hard surface including provision of expansion joints at 6Metre intervals across the platform by Groove cutting 6mm wide with polysulphide sealant in full depth of concrete etc., The coarse and fine aggregates to be used should comply with the requirements of 15 Standards. (No separate payment will be made by the Department for the excess usage of materials.

Providing and laying in position, Standardised Concrete Mix M15 Grade in accordance with IS:456-200 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/M3 and maximum water cement ratio of 0.55, including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improvement workability without impairing strength and durability with about (5 Cu.m) 7730 Kg of 20mm machine crushed stone jelly and with about (3.3 Cum)5156 kg of 10-12mm machine crushed stone jelly and with about (4.7 Cum) 7670 kg of sand, but excluding cost of reinforcement gril fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrator and sprinkling floor hardener at 4Kg/M2 and finishing with power trowel including laying in alternate bays. The coarse and fine aggregates to be used should comply with the requirements of 15 Standards. (No separate payment will be made by the Department for the excess usage of materials.

Supplying and laying of Ready mix 15 Grade for the following grade of concrete having characteristic strength not less than specified in the IS 456 - 2000 using Ordinary Portland cement with minimum cement content of 366 Kg / cum confirming to IS 8112. Coarse aggregate having a specific gravity of 2.60 using 20 mm down graded hard blue granite broken stone jelly and fine aggregate without fly ash as per IS 383 - 1970 (2007) with suitable water cement ratio not less than 0.45 of water quality confirming to IS 456 - 2000 including use of plasticizer of approved make & dosage of required grade at all location and levels with specified high workability as per IS 1199 - 1959 (2004). The initial & final setting time confirming IS 12269 - 1987 (2004) .The admixtures affecting the quality and strength of the confirm IS 9103 - 1979 [ usual admixture - Air entraining & water reducing In Ground floor upto 4.50M height above basement.

BRICK WORK in cement mortor 1:5(one cement, five sand) using best quality Country bricks of size 8" 3/4"x4 ¼ x 2 ¾ “ for walls including cost of scaffolding curing, finishing etc., complete complying with standard specification and as directed by the departmental officers. In foundation and basement.

In Ground floor upto 4.50M height above basement

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild steel sheets of size 90cm x60cm 10gauge stiffened with welded mild steel angles of size 25mm x 25mm x 3mm laid with country wood joist of average of size 10cm x 6.50cm at about 90cm centers with casuarinas props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporation officers. The rates should inclusive of cutting, bending, welding charges of M.S.sheets; M.S. angles etc complete complying with standard specification and as directed. Column footing, Plinth beam and top tie beam.

Rectangular beams and floor slabs, tie beams, lintels, landing slab, loft etc.,

Columns, ratguard slab, curtain slab and sun shades etc.,

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C.works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed by the departmental officers.

PLASTERING with cement mortor 1:3 (one cement and three sand) 10mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed by the departmental officers.

Painting the walls with two coats ready mixed exterior / interior emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Supplying and laying of High profile colour galvalume sheet (as per ISI Standard) with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick not less than 150 GSM and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m and long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site).

Supplying and fixing Galvalume sheet louvers 0.47mm thick (55AI:43, 4Zn:16SI TCT AI colour coating) with yield strength of 550 Mpa made from high tensile / CR sheet of approved quality with outer and middle frame 75mmx75mmx3mm square pipe as per drawing approved by the officers including cost of all materials, Labour charges for fixing aligning etc., complete as directed by the departmental officers.

Supplying and fixing of 40 X 6mm G.I Flat over the galvalume sheet roofing which is placed on the top of Purlin in the longitudinal direction to avoid the lifting of roofing during heavy wind. The rate is inclusive of GI screws 75mm length with rubber and aluminium washer, drilling hole over GI Flat to hold the sheet and purlin with necessary adhesive flashing tap directly over the galvalume sheet including labour charges for fixing, conveyance, loading, unloading and cutting etc. complete as directed by the departmental officers.

Supplying and fixing of Steel glazed AIR INLET WINDOWs of size 0.6m x 0.6m using extruded angles (Z-section) alround for frame with centre mullion T-section) and shutter with the same Z-section properly fixed with hinges 2 nos. for each shutter. The panel of shutter fixed with G.I. sheet of'18 gauge and necessary locking arrangements including weld mesh cover using weld mesh 25mm x 25mm x 10mm gauge and welded with iron square bars of 10mm size - 3nos. horizontally and 2nos. vertically welded together to form a grill and welding grill to the main frame with 4mm thick and 12mm wide MS flats. The rate is also inclusive of one coat of steel primer and two coats of ANTI CORROSIVE METALLIC paint and quality, 2 nos. 20cm long stays for shutters etc complete (The paint should be got approved by the Executive Engineer before use on work ) The shutters should open inside.

Supplying and fixing(under lintel grove) cold rolled ROLLING SHUTTERS of approved quality of 18 gauge 7.5 cm wide cold rolled lathe section in one piece interlocked together with specially designed pipe shaft with adequate number of high tensile steel wire springs of approved quality complete with brackets side guides and arrangements for inside and outside locking arrangements with push and pull operations and pulling back handle with all accessories in best workmen ship and the entire shutter painted with two coats of best quality anti-corrosive paint over one coat of red oxide primer and clear opening of 1.80M width 2.60M height. The rolling shutter shall be placed below the lintel and behind the RCC curtain slab of 7.5 cm thick and 45 cm depth. Each rolling shutter shall be provided with one pair of approved quality of ball bearing complete. Rolling shutter should confirm to I.S.6248-1979and should be got approved by the Executive Engineer before fixing .[This specification consists of the following component materials required for erection of rolling shutter.(1).18 G 3" lathe section 1.90M long-29 Nos. (2)10 G guide channel 2.6Mlong-2 Nos.(3).13 G bottom plate for 1.8M long with angle.(4).M.S.pipe 40mm dia. C'class -2M long.(5).10SWG side plate 13"x12"-2 Nos.(6).2 SWG spring 3" bore. (7).'U'-clamp.(8).ball bearing suitable for 2 1/2 "pipe.(9).18 SWG clip suitablefor 4"lathe.(10).20 SWG M.S.sheet. Etc.

Supply and erecting and hoisting of ISMB 300x140mm steel stanchion post including cleats to receive the purlin all cutting drilling holes welding and fixing of members with necessary bolts, nuts anchor bolt of approved quality hoisting aligning and glazing the trusses in position as per plan. The rate should include the cost painting the members with one coat or red oxide primer and zinc chromate etc., complete complying with standard specification and as directed by the departmental officers.

Fabricating and supplying and erecting the required number of Trusses with structural steel members like angle iron MS plates for all truss members including cleats to receive the purlins all cutting drilling holes welding and fixing of members with necessary bolts nuts anchor bolt of approved quality hoisting aligning and laying the trusses in position as per plan. The rate should include the cost of painting the members with two coats of synthetic enamel paint over one coat of red oxide primer etc., complete complying with standard specification and as directed by the departmental officers.

Providing and laying in position, Standardised Concrete Mix M20 Grade in accordance with IS:456-200 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/M3 and mazimum water cement ratio of 0.55, including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improvement workability without impairing strength and durability with about (5 Cu.m) 7730 Kg of 20mm machine crushed stone jelly and with about (3.3 Cum)5156 kg of 0-12mm machine crushed stone jelly and with about (4.7 Cum) 7670 kg of sand, but excluding cost of reinforcement gril and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, cutting etc., and Providing fixtures like fan clams in the RCC floor/ roof slabs wherever necessary without claiming extra etc., complete complying with standard specfication and as directed the departmental officers. The coarse and five aggregates to be used should comply with the requirements of 15 Standards. (No separate payment will be made by the Department for the excess usage of materials. In foundation and basement.

In Ground floor upto 4.50M height above basement.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approvfed pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm laid in cement mortar 1:2 (one of cement and two of sand)mixing with water proofing compound confirming to ISS at 2% weight of cement used and pointed with water proofing compound mixed with red oxide etc., complete complying with standard specification and as directed by the departmental officers.

Painting new iron works with two coats of synthetic enamel paint of approved quality and colour over the red oxide primer in all floor including cost of scaffolding, brushes etc., complete complying with standard specification and as directed.

Paving the flooring with colour designed Ceramic tiles of size 305x305x6mm of approved quality and colour over a base layer of C.M.1:3, 20mm thick in all floors used 0.20 kg / m2 including finishing the joints and pointing flush with even surfaces etc., complete complying with standard specifications and as directed.. (The tiles should be got approved by the Executive engineer before use on works).

Dadooing the walls with colour printed Design glazed tiles of size 150mmx150mmx6mm of approved quality and colour over a base layer of C.M.1:2, 10mm and pointing the joints with white cement mixed with colouring pigment at the rate of 0.40 kg/sq.m neatly in all floors, curing etc., complete complying with standard specification and as directed by the departmental officers. (The tiles should be got approved by the Executive engineer before use on works).

Supplying and fixing UPVC (Un-Plasticized Polyviny Chloride ) windows of casement type (open) from the profile the size of outer frame 60mmx58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash an outer frame that enables opening of the window. The window should be fized to the wall the 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers (wood powder / rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water /moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-charge. (Note: stainless steel butt hinges and necessary S.S.screws shall be paid separately) 30mm thick.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position complete as per direction of Engineer-in-charge Frame size 65x100mm.

Stainless steel butt hinges 125x64x2.50mm.

Tower bolt 200x10mm.

Handle 125mm.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (UPVC) sections. Profiles: The Profiles should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25x24x25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60x102mm. The mullion should be of 60x74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation. The profiles should be cut to length and welded 45 degres. The window should be designed such that the water drainage does not passs through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding sylon plug and driving ms electroplated screws into plug.

Supplying and fixing of UPVC (Up-plasticized poly vinyl choloride) louvered ventilators of from the profile the size of outer frame 60mmx58mm and shutter profile size of 60 x78mm both profiles are reinforced with GI/ 1mm 125 GSM and 100% corrosion free, the profile are multi colored chamber section with wall thick of 2mm. The EPDM rubber (Black colour ) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiation pin headed glass 4mm thick should be provided to the louvers. The Ventilator should be fixed to the wall with 100% packing with screws silicon packing allround the frames. The Ventilator should got approved from the Executive Engineer before use on work.

Supplying and fixing M.S Grill to special windows and ventilators etc using 20mmx6mm angle including cost of MS grill, one of red oxide and fixing in position etc. complete complying with Standard Specification and as directed.

Paving the flooring with double charged vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed with same colour pigments etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing in position of best approved quality of rain water down fall pipe of size 110mm dia having a pressure of 4Kg/sq.cm including cost of PVC bents, PVC shoe, cast iron gratings of required diameter and special clamps, brass screws nails etc., and fixing of cast iron gratings at junction of parapet and the junction of roof slab including finishing neatly etc., complete complying with standard specification as directed by the departmental officers. 110mm PVC below ground level.

Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers.

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing fine polished cuddapah slab of 25mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

Supplying, and fixing PVC pipes of 20mm dia of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work.

Supplying, and fixing PVC pipes of 25mm dia of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work.

Supplying, and fixing PVC pipes of 32mm dia of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work.

Supplying, and fixing PVC pipes of 50mm dia of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work.

Supplying and fixing in position 20mm dia PVC Elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading, jointing the Specials etc complete.

Supplying and fixing in position 20mm dia PVC Bend of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of Pipes, jointing the Specials etc complete.

Supplying and fixing in position 20mm dia PVC Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of .Pipes, jointing the Specials etc complete.

Supplying and fixing in position 20mm dia PVC Coupler of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of .Pipes, jointing the Specials etc complete.

Supplying and fixing in position 25mm dia PVC Elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of .Pipes, jointing the Specials etc complete.

Supplying and fixing in position 25mm dia PVC Bend of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of .Pipes, jointing the Specials etc complete.

Supplying and fixing in position 25mm dia PVC Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of .Pipes, jointing the Specials etc complete.

Supplying and fixing in position 25mm dia PVC Coupler of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of .Pipes, jointing the Specials etc complete.

Supplying and fixing in position 32mm dia PVC Elbow of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of .Pipes, jointing the Specials etc complete.

Supplying and fixing in position 32mm dia PVC Bend of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of .Pipes, jointing the Specials etc complete.

Supplying and fixing in position 32mm dia PVC Tee of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of Pipes, jointing the Specials etc complete.

Supplying and fixing in position 32mm dia PVC Coupler of heavy duty of approved quality and good variety including cost of fixing charges necessary cutting and threading of .Pipes, jointing the Specials etc complete.

Supply and fixing in position wash hand basin with new one fixing in position best quality approved make white glazed earthenware wash hand basin of size 550x400mm with a pair of cast iron brackets, including cost of 15mm dia metre brass chromium plated pillar tap, 32mm dia metre G.M wheel valve 15mm dia brass nipple 15mm dia nylon connection etc., including fixing the wash hand basin in the wall in position with pair of CI brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a primary coat of anticorrosive paint including testing for leakage etc., complete complying with standard specification.

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality including raising the elevated portion around the manhole to accommodate manhole cover with brick work in Cement mortar 1:3 etc., complete as directed by the departmental officers.

Supplying and fixing in position of best Indian make PVC Water Tank of 1000 litres capacity confirming to ISI standards as directed by the departmental officers including cost of material and conveyance charges of material to work site etc., complete complying with standard specifications.

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve of 25mm dia with ISI make including cost of shellac, thread balls, etc., complete.

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve of 32 mm dia with ISI make including cost of shellac, thread balls, etc., complete.

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make confirming to IS specifications and quality including cost of shellac, thread, etc., complete as directed by the departmental officers.

Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete as directed by the departmental officers.

Supplying and fixing Brass Chromium platted Towel Rail 600mm Long and 20mm diameter with brackets of same materials including cost of teak wood plugs, CP Screws etc., complete complying with standard specification as directed by departmental officers.

Construction of Inspection Chamber following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1;5 (One cement and Five sand) using best quality of second class Ground Mould Bricks of size 9”43/8” 23/4”with Plastering with Cement Mortar 1:3 (One cement and Three Plastering Sand) 12mm thick inner and outer sides and wearing coat 1:3:6 (One cement, three crushed stone sand and Six aggregate) 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers.

Supplying and fixing RCC fencing post of size 15cm x 15 cm at top and bottom, 2.70m long with RCC 1:2:4(One cement, two sand and four aggregates) using 20mm stone jelly including cost of moulding charges, cost of steel and fabrication of reinforcement, finishing, curing, aligning in position etc., complete complying with standard specification and as directed by Corporation officers. Vertical Post 2.70M

Strut Post-1.80M

Supplying and fixing chain link fencing of size 2”x2” using 10 Gauge Galvanised iron wire to the structural angle as directed by the departmental officers.

Supplying and fixing of M.S Gate in two leaves with B Class pipe of size 50mm dia pipe alround and 15cm dia pipe vertically at 15cm intervals including fixing of 18 gauge M.S.Sheet at bottom / middle of gate 50cm height including cost of all furniture fittings, aligning, fixing in position with two coats of anti corrosive metallic nut brown colour paint over one coat of primer etc., complete complying with standard specification and as directed by the departmental officers. Main gate of size 6.00m x 1.80m

Wicket gate of size 1.00m x 1.80m

Drilling of bore well of 150 mm dia including transportation from the place with in the above district in alluvial soil sedimentary strata of ckay and sand stone shale pebbles boulders etc by first taking pilot of 140mm/150mm/200mm dia and the enlarging to required dia by direct or revise rotary mud circulation method using contractor’s rig fuel labour drilling betonies mud and water required for the drilling at the site shown by the departmental officers. 0m and upto 60M depth

60m and upto 90M depth

90m and upto 120M depth

120m and upto 150M depth

150m and upto 180M depth

180m and upto 210M depth

Charges for developing the bore well for entire depth with suitable air compressor of 300RPM capacity (minium 8 hrs) including the transportation labour and fuel charges for conmpressor and directed by the departmental officers and conducting yield test by "V" notch methods, excluding the cost of bore charges and conveyance charges of handle boring.

Labour charges for inserting 165/168 mm dia PVC casing pipe assembly (with slot or without slot) in the drilled hole including jointing the pipes with PVC coupler and cement paste etc.,, complete supplying and packing the annular space with pebbles of size and quality including conveyance is approved by the departmental officers.

Supplying PVC casing pipe (with or without slot) 0f 160 mm dia plain pipe in 3M length each as per ISI 12818 / 1982 to suit deep bore for delivery at site including loading and unloading, freight, transit insurance etc., complete. 160mm dia plain pipe

Supplying and fixing PVC bore well end cap of size 165/168mm dia of approved quality as directed by the departmental officers.

Supply of 4 Sq.mm /PVC insulated and sheathed, 3 core flat type copper cable for submersible motor. Confirming to IS 694 / 1990 for submersible pumpset erection in the filtration well etc., complete

Supply and fixing 40mm dia HDPE pipe for bore to connect the submersible bore etc., complete

Supply and fixing the Nylon Rope to connect the submersible motor in borewell etc., complete.

Supplying and Erection of 3 H.P submersible pumpset confirming to IS-14220 with ISI mark 75x75 LPM X mts Suitable for 150mm bore well complete complying with standard specification including suitable 3-phase panel board with DOL with two level guard starter and accessories and labour charges for erection of submersible pump set in bore well including fixing and jointing the submersible cable(but excluding cost of 4sqmm -3core copper cable) with proper clamps,pressure gauges upto the exterior wall of panel board consisting of JPICN switch starter, voltmeter, ammeter, 3pilot(indicating) lamps capacitor,single phase preventometer,water level guard and laying and jointing the cable and twin earthing as per IE rules etc., complete and testing pump set on trail run for 3days etc., complete complying with standard specification.

Supplying and fixing of 3 Phase motor panel board arrangements with 0 to 20 Amps ammeter 0 to 600 volts voltmeter with necessary switches indicator lamp, starter etc., complete complying with standard specification.

ELECTRICAL WORK Wiring with 2x1.5sqmm(22/0.3) PVC insulated unsheathed SC. Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (For electronic regulator) (5 Points Per Coil) etc., complete complying as directed by the departmental officers.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion etc., complete complying as directed by the departmental officers.

Supply and laying of 2x16 sq.mm sized PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 Mtr Putting 0.15mt layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good etc., complete complying as directed by the departmental officers.

Supply and clamping of 2 x 16 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps etc., complete complying as directed by the departmental officers.

Supply and fixing of brass cable gland for 2 x 16 sqmm PVC armoured LTUG cable with earth connection etc., complete complying as directed by the departmental officers.

Supply and laying of 2x10sq.mm sized PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 Mtr Putting 0.15mt layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good etc., complete complying as directed by the departmental officers.

Supply and clamping of 2 x 10 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps etc., complete complying as directed by the departmental officers.

Supply and fixing of brass cable gland for 2 x 10 sqmm PVC armoured LTUG cable with earth connection etc., complete complying as directed by the departmental officers.

Supply and laying of 4x10sq.mm sized PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 Mtr Putting 0.15mt layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good etc., complete complying as directed by the departmental officers.

Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps etc., complete complying as directed by the departmental officers.

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box with hylem sheet etc., complete complying as directed by the departmental officers.

Supply and fixing of 5A/15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW box with hylem sheet etc., complete complying as directed by the departmental officers.

Supply and Fixing of 3nos 5Amps(3pin and 2 pin)combined flush with wall socket with control switches concealed in suitable TW box covered with hylem sheet in flush with earth connection(For computer plug Socket) etc., complete complying as directed by the departmental officers.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1No 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Standard make) etc., complete complying as directed by the departmental officers.

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm.with the following on wall with earth connection only etc., complete complying as directed by the departmental officers.

Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) etc., complete complying as directed by the departmental officers.

Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round block son wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting etc., complete complying as directed by the departmental officers.

Supply and fixing of 48Watts LED street light fitting (higher End) complete with 32mm dia GI pipe (Class ‘B’) with 1 No 32mm GI bend complete on the Existing post or wall with PVC unsheathed copper leads MS clamps etc., complete complying as directed by the departmental officers.

Supply and fixing of WT bulk head fitting suitable with guard and 15 W LED bulb etc., complete complying as directed by the departmental officers.

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with30M down rod on the existing clamp etc., complete complying as directed by the departmental officers.

Provision for Earth work using JCB machine for cable laying work at hard /rocky soil .The cost includes hire charge of machine, fuel charges and other incidental charges, etc., complete complying as directed by the departmental officers.

Supply and laying GI pipe of size -50mm dia for road crossing protect of UG cable including all incidental charges etc., complete complying as directed by the departmental officers.

Supply and fixng of TNEB meter board suitable for3phase 200A service connection made up of suitable angle iron frame work of size 3feet x 2feet using angle ironof size1-1/2"x1-1/2"x1/4" rigidly fixed on wall covered with hylemsheet of size 3feet x2feet of 12mm thickness with necessary bolt sandnuts supports and supply and fixing of 3Nos.200A fuse units (500V),1No.neutral link,copper earth flat of size1"x1/4"within terconnection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection etc., complete complying as directed by the departmental officers.

Supply and fixing of 3phase 32A aerial fuse unit for 3Nos.32A fuse units(500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps etc., complete complying as directed by the departmental officers.

Earthing as per PWD standard with an earth electrode of 2metre Class'B' GI pipe of dia not less than 32mm complete with necessary masonry work etc., complete complying as directed by the departmental officers.

Supply, Fabrication, Commissioning and Testing of 50 Watts -LED-Solar-Off Grid - Street Light with Gi- Post .The cost includes material cost, transportation cost, masonry work cost, any escalation in GST-cost as arises, Fabrication charges for Street light Post, Electrical wiring with material cost and labour cost as required at site. The Solar PV panels and LED light fittings to be ISI make and to be satisfy to TEDA norms as directed by the departmental officers. Solar PV Module 12 Volt- 90 Watts - Mono- crystalline. The modules are designed to withstand highly corrosive atmosphere and heavy wind loads and of certified standards. Temperature of Operation should be of 10 to 50 degree Celsius with Thermal Management System for ambient temperature in lower & higher rated value. The controller to be MPPT.(ISI Make) Battery-Lithium Ferro Phosphate make and designed for tropical conditions and have a long life. Minimum Voltage - 12.8V, 42 AH capacity ( ISI make) LED Light- White Light Emitting Diode (W-LED) (ISI Make) 12 Watt, W-LED luminary, dispersed beam, soothing to eyes with the use of proper optics and diffuser.LED Chip is of compliance to IES: LM-80 (Approved Method for Measuring Lumen Maintenance of LED Light Sources and LED lumen depreciation time to L70). Test report to be submitted before installation and to be get approval from Departmental Officers. The Color Temperature to be between 5500 K to 6500 K. The Die cast Aluminium IP66 enclosure provides excellent Protection against water entry, dust and humidity. Street light Post:- GI- Class-B (ISI norms) Pole height 6.5 m above the ground level. The G.I post must with 300mm x 300mm x 6mm MS base plate duly welded at the bottom and with concreting and construction on masonry pedestal.

Supply and fixing of TNEB Three Phase service box size of 660mmx510mm x 260mm -1no, hylum sheet of size 305mmx255mm in suitable bolt with nut, 3Nos fuse unit 63A /500V including Fabrication, powder coating , complete inner connection with 10Sqmm PVC insulated unsheathed SC. Copper wiring. and for 8No SWG earthling with earth link and two powder coating etc., complete complying as directed by the departmental officers

Supply and fixing of Main control box size of 750mmx 460mm x 260mm in Three phase, All control Panel in side fixing of 63A On load change over switch 1No,63A Earth link, Tneb and Genset power indication lamb 2set and all line voltage and currant indication VAF Meter with Fabrication, powder coating ,neutral , complete inter connection with 10Sqmm PVC insulated unsheathed SC. Copper wiring etc., complete complying as directed by the departmental officers.

Supply and installation of Lighitng arrangments with three colour Bulbs( Red,Yellow,Blue) for indication of Three phase EB power supply availablity flush with suitable TW Box and with necessary connections etc., complete complying as directed by the departmental officers.

Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 24 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only etc., complete complying as directed by the departmental officers.

Supply and run of 4 x6 sq.mm. PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains etc., complete complying as directed by the departmental officers.

Supply and run of 4 x 6 sq.mm. PVC insulated SC unsheathed copper conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains etc., complete complying as directed by the departmental officers.

Providing Liaison work with TNEB Department for getting new service connection by engaging TNEB registered license holder for the load calculation and registration of E.B. application with VAO certificates and land registration documents with sketch , wiring circuits ,etc, complete. The rate including cost of conveyance charges for conveying of poles to the site by hire vehicle and arranging inspection of site by AEE / AE / TNEB for Preparation of necessary estimate and getting advise letter from TNEB for arranging to paid Deposit and service connection charges . Engaging labor for Earth work in pole erection, stay erection , laying of conductors etc., complete including obtaining service connection from TNEB. for Providing E.I to the newly constructed Godown building etc., complete complying as directed by the departmental officers.

SRI VENKATACHALAPATHY CONSTRUCTIONS PRIVATE LIMITED (BID ID -1466703)

Sri Balaji Constructions (BID ID -1466920)