Renewal of road work in Parikalp Nagar(west) Residential Colony Kanpur road Lucknow

Amount

Providing, laying, spreading and compacting stone aggregates of specific sized to water bound macadam (75 mm thick)specification including spreading in uniform thickness, hand packing, rolling with smooth wheel static roller 80-100 kn in stages to proper grade and camber, applying and brooming, Stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading III as per Technical Specification Clause 405. as per direction of engineer in charge.

Providing and laying primer coat with bitumen emulsion ( SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.71-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502. as per direction of engineer in charge.

Providing and applying tackcoat with bitumen (VG-10) using bitumen distributor at the rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom including all cost of labour T&P, material, carriage cost, compection,etc. required to complete the work at site , as per direction of engineer in charge.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 6.7 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per Technical Specification Clause 508.Paver machine should be used as per direction of engineer in charge.

Providing and laying seal coat sealing the voids on bituminious( VG-10) surface laid to the specified levels, grade and cross falls using Type C, including all cost of labour T&P, material, carriage cost, compaction,etc. required to complete the work at site , as per direction of engineer in charge.

Edging with straight over burnt bricks ,laid dry length wise including excavation refilling, consolidaation with a hand packing and spreading nearly surplus earth within a lead 50 meter.as directed by Engineer -in charge. as per direction of engineer in charge.

Centering and shuttering for CC block including cost of shuttering. .as directed by Engineer -in charge.

Providing and laying cement cocrete in kurbs,steps,and the like at or near ground level excluding the cost of centering & shuttering centering and finishing 1:1.5:3 1 cement 1.5 course sand 3 graded stone aggregate 20mm nominal size. as per direction of engineer in charge.

Edge Brick soling (Dry) (60% Bricks are used as old.) as per direction of engineer in charge.

m/s mohd. zamil

Delight Construction

M/S M. K. CONSTRUCTION