M and R to Guest House of Water Resources Department at Kohora for the year 2023-24.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from naturalsources : 8 graded stone aggregate 40 mm nominal sizederived from natural sources)

Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from naturalsources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying damp-proof course 40mm thick with cementconcrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral-staircases

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade -1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade -1, Type II marked :

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)

20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 800 x 1200 mm

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Supply and installation of king size wood bed as per approved drawing & design / specification. Overall Size:Dimensions (In Centimeters) H 94 x W 191 x D 208 Make: Wakefit, Model: Pegasi Sheesham Wood King Size Bed In Golden Brown Finish

Supply and installation of 152 mm king size orthopedic or dual comfort mattress as per approved drawing and design specification Mattress 152 mm Thick 1982 mm X 1829 mm Make: Wakefit Model: Wakefit Orthopedic Memory Foam Mattress

Supply of Serenity Quilted Comfort Pillow 46X68 Cm in White Colour: Living Essence

Supply and installation of king size BEDSHEET as per approved drawing and design/ specification. Brand: Goddess Decor White Solid 280 TC Cotton King Sized Bed Sheets with 2 Pillow Covers Dimensions(In Inches): King Size Fitted Sheet Dimensions (In Centimeters) L 274 x W 254 Fabric Cotton No of Pillow Covers: 2

Supply and installation of micro fibre comforter as per approved drawing and design/ specification. Brand: Story@Home Green Microfiber Stripes 180 GSM Fusion Reversible Double Comforter Dimensions(In Inches):L 100 x W 90 Weight: 1.98 Kg Filler: Microfiber Quilted: Yes

Supply and placement of Bedside table as per approved drawing and design/ specification Make: fabuliv Model: margot bedside chest In teak Finish Height: 495 mm Width: 558 mm Depth: 304 mm

Supply and installation of wooden study table as approved drawing and design/ specification Brand: Wakefit Melvin Solid Wood Study Table In Irish Walnut Colour Dimensions (in Inches) H 31 x W 45 x D 24 Weight: 23.5 KG Warranty: 36 Months' Warranty Assembly: Carpenter Assembly Primary Material: Solid Wood

Supply and installation of Study Chair as per approved drawing and design/ specification. Make: Green Soul Model: Nova Breathable Mesh Ergonomic Chair In Black Colour Dimensions (In Centimeters) H 107 x W 61 x D 61

Supply and installation of wood TV unit of overall size Height- 470 mm Length- 1397 mm Width- 407 mm as per approved drawing and design/ specification. Make: Fabuliv Model: Astrid Sheesham Wood TV Console for TVs in Light Walnut Finish for TVs up to 43"

Supply and installation of CONSOLE unit . Brand: Woodsworth Alex Solid Wood Console Table In Black & Gold Finish Dimensions: H 30 x W 40 x D 16 (All Dimensions in Inches) Warranty: 36 Months' Warranty Assembly: No Assembly Required Primary Material: Mango Wood Room Type: Living Room Top Material: Solid Wood

Supply and installation of customized engineered wood 2 door wardrobe Kibo 2 Door Wardrobe in Columbia Walnut Finish with Mirror & Lock Brand- Valuewud Dimensions (in Inches) H 71 X W 31.5 X D 17.5

Supply and installation of artwork as per approved drawing and design/ specification 1372 mm X 762 mm Make: 999store Model: Multicolour MDF Printed Colorful Abstract Multi Frame Painting

Supply and installation of decorative toilet mirror as per approved drawing and design/ specification Make: Elegant Art and Frames Model: Transparent Glass Difficult LED Mirror Dimensions (In Centimeters) Length: 91.44, Width: 1.27, Height: 60.96

Supply and installation of decorative Standing lamp as per approved design and drawing/specification. Make: Sapphire Model: Cesky Beige Fabric Shade Tripod Floor Lamp with Brown Base

Supply and installation of 3 seater fabric sofa H 34.5 x W 76 x D 32.5 inch as per approved drawing and design/ specification. The seat made of PU foam with density 32 +-2 kg/cu m having an additional top layer of PU foam with density 28+-2kg/cu m. The seat is upholstered with leather. The back would be made up of same foam density. The understructure is made up with 1.2+- 0.1 cm thick hot pressed plywood. Dia 4 mm zigzag spring assembly mounted in understructure for support. the leg is welded assembly made in SS tube and plate. Model: fidel 3 Seater Sofa in slate grey Colour Make: casacraft

Supply and installation of single sofa with fabric cushioned seat as per approved drawing and design/ specification Make: casacraft pepperfry Model: fidel 1 seater sofa wine red colour Product Dimensions:H 34.5 x W 34.5 x D 32.5 inch

Supply and installation of engineered wood Center Table1:Dimensions (in Inches) H 15 x W 47 x D 23 as per approved drawing and design/ specification. Make: casacraft Model: Alarico Solid Wood Coffee Table In Walnut Finish

Supply and installation of micro fibre sofa cushion as per approved drawing and design/ specification Brand: Gilson Colour: White Set Content: 1 Cushion Insert Material: Polyester Dimensions: 24 Inch (L) x 24 Inch (W) Filler: Microfiber

Supply and installation of wood 4 seater dining table Table :Dimensions (in Inches) H 29 x W 53 x D 31; Chairs :H 29 x W 17 x D 15.5; as per approved drawing and design/ specification Make: Eros Model:Wondertop Solid Wood 4 Seater Dining Set In Marble Finish

Supply and installation of customized engineered wood 4 door wardrobe with PU finish as per approved drawing and design/ specification

Supply and installation of customized engineered wood reception desk with PU Finish as per approved drawing and design / specification

Supply and installation of Ergonomic chair for lumbar support with 360° swivel base, metal frame, cushioned seat, seat height adjustment and tilt mechanism as per approved drawing and design/ specification Make: High Living Model:Zeus Leatherette Executive Chair in Black Colour Primary Material Leatherette

Supply and installation of wood file cabinet as per approved drawing and design/ specification Dimensions (In Centimeters) H 122 x W 79 x D 36 Make: Wakefit Model:Cove Solid Wood Bookcase In Irish Walnut Colour

Supply and installation of customized engineered wood office executive desk with PU Finish as per approved drawing and design / specification

Supply and installation of wood 6 seater dining table . Brand:Wakefit Zufa Solid Wood 6 Seater Dining Set In Midas Gold Finish Dimensions (in Inches) Table : H 30 x W 62 x D 35; Chair : H 33 x W 17 x D 21 Primary Material Solid Wood

PROJECTOR - supply and installation of projector Technology One Chip DLP Native Resolution 800 x 600 (SVGA) Brightness (Lumens) 3800 Optical Zoom Yes If Yes, Optical Zoom (%) 110 If Yes, Type of Projector Standard Throw (0.91 to 2.5) Type of Light Source UHP / UHE / UHM Minimum Life of Light Source (In Normal Mode) (Hours) 4000 On Site OEM Warranty for Light Source (Time or Life in Hours whichever is earlier) 1 Year or 1000 Hrs. On Site OEM Warranty 2

Supply and installation of Queen size metal bed with finish as per approved drawing & design / specification. Overall Size: Length - 2055 mm Width - 1600 mm Height -915 mm Make: @home, Model: Ursa Queen Size Bed in Black Finish

Supply and installation of queen size cotton mattress as per approved drawing and design/ specification. Dimensions (In Centimeters) 183 x 122 Make: SleepSpa Model: Dual Comfort-Grey 6 Inches HR Foam Mattress with Comfort Cubes and Rebotech In Queen Size

Supply of Serenity Quilted Comfort Pillow 46X68 Cm in White Colour Living Essence

Supply and installation of queen size BEDSHEET as per approved drawing and design/ specification. Brand: Goddess Decor White Solid 280 TC Cotton queen Sized Bed Sheets with 2 Pillow Covers

Supply and installation of wooden and metal center table as per approved drawing and design/ specification.Installation: Luke Coffee Table in Teak Finish by Ikiriya Dimensions (in Inches) H 16 x W 34 x D 16 Primary Material Sheesham Wood

Supply and installation of engineered wood 4 seater dining table as per approved drawing and design/specification. Make: Mintwud Model: Apate 4 Seater Dining Set in Wenge Finish Dimensions (in Inches) Table : H 29 x W 43.5 x D 27.55 ; Chair : H H 35 x W 16 x D 19.09

Supply and installation of decorative toilet mirror as per approved drawing and design/ specification 710 mm X 560 mm Make: Elegant Arts & Frames Model: Framed Rectangular Wall Mirror In Cream

Supply and installation of 3 seater fabric sofa 813 mm X 1778 mm X 737 mm as per approved drawing and design/ specification. The seat made of PU foam with density 32 +-2 kg/cu m having an additional top layer of PU foam with density 28+-2kg/cu m. The back would be made up of same foam density. The understructure is made up with 1.2+- 0.1 cm thick hot pressed plywood. Dia 4 mm zigzag spring assembly mounted in understructure for support. the leg is welded assembly made in SS tube and plate. Make: Febonic Model: Ladybug 3 Seater Sofa in Blue colour

Supply and installation of micro fibre sofa cushion as per approved drawing and design/ specification 406 mm X 406 mm Make: Home Attire Model: White Microfiber Filled Cushion Insert

Supply and installation of wood TV unit Installation: Harmond TV Unit In Brown Maple & White Finish For TV Upto 55 Inch by bluewud Assembly Carpenter Assembly Dimensions (In Centimeters) H 132 x W 67 x D 356 Dimensions (in Inches) H 52 x W 26 x D 140 Primary Material Engineered Wood

Supply and installation of single size metal bed with finish as per approved drawing & design / specification. Brand: Doctor Dreams - Nilkamal Dimensions: H 35.82 x W 38.6 x D 78.3; Seating Height 15.4 Weight: 26.67 KG Warranty: 12 Months' Warranty Assembly: Carpenter Assembly Primary Material: Metal Room Type: Bedroom Storage: No Storage Seating Height: 15.4 Recommended Mattress Size: 75 L x 36 W Inch

Supply and installation of Queen size mattress as per approved drawing & design / specification. Brand: Sleepspa Soft Bounce 4 Inch Herb Fresh Foam Mattress In Single Size Dimensions (In Centimeters) 183 x 76 Firmness Medium Soft GSM 200 Material HR Foam Mattress Material Herb Fresh HR Foam + PU Foam Quilting

Supply and installation of cotton or poly cotton SINGLE size bedsheet as per approved drawing and design/ specification Brand: Jaipur fabric White Solid 150 TC Cotton Single Bed Sized Bedsheet With 1 Pillow Cover Fabric Cotton

Supply and installation of customized engineered wood 2 door wardrobe Julian 2 Door Wardrobe in Wenge Finish with Mirror & Lock by mintwud Dimensions (In Centimeters) H 185 x W 76 x D 46

Supply and installation of cotton antiskid 50x70 inches bath mat

Supply and installation of PVC antiskid 24x17 inches bath mat

Supply and installation of brass and glass chandelier. Dimensions- 16.9x23.2x23.2 inches. Trento Brass Glass Shaded Chandelier,

Supply and installation of Haier 280 L 3 Star Frost Free Double Door Refrigerator Conformity to Indian Standrad IS:15750(2006) for Frost Free Storage Volume(NET CAPACITY) (Litres) 280 Type of Door Double Insulation Puff Method of Defrosting Frost Free BEE Star Rating as on date(Central Ministries/ Departments while procuring shall ensure that the items carry 4 star or higher Star Rating of BEE) 3 Coil Material Copper (Cu) Type of Finish Metallic Colour Silver

Supply and installation of stain resistant doormat. Dimension - 36x18 inches