SPL REPAIR TO HQ 102 INF BDE OFFICE BLDG P 16A ZONE A AND B CERTAIN OFFICE AREA UNDER GE 873 EWS

Amount

Dismantling timer framed in fillets, rails, posts purlines, etc under 40 sqcm in section complete all as specified and directed by Engr-in-charge.

Dismantling wall and ceiling board (fibre, pulp, insulatin etc) or insulation board/slabs/blanket any thickness including cover fillets complete all as specified and directed by Engr-in-charge.

M&L plain fillet second class Hardwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm as spd and directed by Engineer -in -charge.

S & F anodised aluminium snap grid frame work for false ceiling size of grid 605x605mm and 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/aluminium framework with screws incl taking down & refixing all electric fittings, fixture and wiring complete all as specified and directed by Engr-in-charge.

M&L 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling incl taking down & refixing all electric fittings, fixture and wiring complete all as specified.

M & L for 18/19mm width teak wood lipping 6 mm thick for Patical board/block board complete fix with nail.complete all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,complete all as specifeid and directed by engr-in-charge

M&L 25 mm thick cement concrete type 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in floor finish, surface finished even fair to receive top finish complete all as specified and directed.

M&L non skid ceramic tile 7 to 8 mm thick (square/rectangular) are of each tile exc 0.11 Sqm but not exc 0.18Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick CM 1:4 screed bed for laying floor all as specified and directed.

M & L for light shade Vitrified Ceramic tiles 10 mm thick (square/rectangular),polished, area of each tiles not exceeding 0.36 sqm in floors over 15 mm thick screed bed of CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and directed by Engr-in-charge.

M&L for white glazed ceramic tiles in vertical surface 300X200 X7 mm thick set and jointed in neat cement slurry over 10 mm thick rendering in CM 1:3 and pointed in white to match complete all as specified and directed by Engr-in-charge.

Taking down shutters of any description not exceeding 1.00 sqm each and refixing in the same opening complete all as specified & directed.

S&F 1st class soft wood 30 mm thickness plain framed ,panelled shutter (any number of panels ) ,with panels of timber flat on both sides (feather edged) , or of veneered patrticle board mediunsity ,wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed by Engr-in-charge.

M&L preparation of new wooden surfaces, two coats of synthatic enamel paints, over a coat of pink primer, surfaces of any discription, not otherwise discribed, over 10 cm width or girth for doors,ceiling, complete all as specified and directed by Engr-in-charge.

S&F Aluminium handles, cast type, anodised 100mm long completed all as specified and directed.

S&F mild steel, cold rolled, medium weight butt hinges 100 mm, fixed with screws to wooden frames or fixed with welding to iron frames complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-charge..

250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

Hacking out out old broken glass (any thickness size quality or description ) from steel or wooden frames or stone concrete or brick surrounding glazing with putty or fixed with beads complete all as specified &directed by Engineer -in-Charge.

S&F for 3 mm thick sheet glass ,ordinary quality and glazing with oil puttyin square n.exe 0.5 sqm each panes complete all as specified & directed.

S&F aluminium Door closer hydraulically regulated,extruded section body designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed in repairs complete all as specified

S & F in repairs vitreous china wash down water closet (Padestal Pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with flat bottom and connection to drain or out going pipe and flushing pipe etc complete all as specified and directed.

S & F in repairs 10 ltr capacity PVC Low level flushing cistern including 32mm dia PVC flush pipe, fixing in position complete all as specified and directed.

S&F in repairs vitreous china wash hand basin of 550mmx400mm white flat back including chromium plated fancy type pillar tap capstain head suitable for 15mm bore of pipe, PVC connection 15mm dia & 45cm long with cromium plated nuts and bolts and suitable washers, PVC wate pipe 32mm bore CP waste coupling including angle iron brackets of 35x35x6mm etc complete all as specified and directed.

Supply & fixing in repairs 15mm Stop valves, fancy type Chromium plated, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete, all as specified & directed by Engineer-in-charge.

S&F Health faucet (ABS BODY) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m ong flexible tube & ABS wall hook including making connection & fixed In position complete in all respect as specified.

S&F, PVC connection of 15 mm size with PTMT nuts of length 450 mm , complete all as specified and directed by Engr-in-charge.

Demolition of unreinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level).

M & L for 100 mm thick PCC 1:4:8 type D-2(40 mm graded stone agg) in sub base of floor coarse complete all as specified and directed by Engr-in-charge.

M&L for chequered cement concrete tiles 20cm x 20 cm x 25cm thick , set jointed 20mm screed bed in CM 1:4 and pointed in neat cement slurry in floor with grey cement and pigment complete as spd and directed by Engineer -in -charge.

Taking down cement plaster of any description on brick or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L15 mm thick rendering in cement mortar 1:4 on fair faces of brick work, surface finished even & smooth without using extra cement complete all as specified and directed .

M &L integral water proofing compound complete all as specified and directed .

M&L rendering 10mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered or pointed surface of wall and applying two coats of distemper over a coat of primer complete all as specified and directed.

M&L, for prepartion of newly plastered wall surfaces of any description applying Two coat of cement base paint /over a wall of primer ccomplete all as specified and directed .

Preparing surface by brushing with wire brushes for removing cakes concerete etc ,sweeping with brooms and finally fanning the clened surface with gunny bags to remove all loose dirt etc complete all as specified and directed .

Material and labour for 25 mm thick PCC 1:2:4 type B-0 using( 12.5 mm graded stone aggregate) as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting complete all as specified and directed.

M & L for Provn of polymeric water proofing roof treatment to non assessable RCC roof described as under and all as specified :- (a) Preparing RCC roof surface and applying one coat of bitumen primer @ Rs. 0.30 Kg /Sqm (b) Applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm (c) Laying of water proofing treatment APP modified polymeric water proofing membrane of weight not less than 3 kg/sqm with non woven polyster mat of weight 160gms/sqm as centre core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s all as specified. (d) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane . (e)Applying two coats of aluminium paint @ 100 gm /sqm ( each coat) complete all as specified and directed.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed.

M&L for revoing existing ladakh pattern window/door chajja's & clean /kept in store for refix the same after repair the block masonry /RCC structure as per site requirement as specified and directed by the Engr-In-Charge.

Taking down carefully damaged copper/aluminum point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/roof complete all as specified and directed.

Taking down of MCB DB/TPN 8/16 way including mcb sp and spn and making good of wall complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through PVC casing and caping of suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board with 3mm thick plastic laminated Hylum Sheet /gang box of suitable size and shape and Modular sunken boxes for mounting light points etc covered ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.cost of gang box /hard wood sunken box shall be deemed to be included in the rate.

(a) One light/fan/Bell point controlled by one 5 Amps one way switch

(b) One 3 pin socket outlet 5 Amps on independent board

(c) One 3 pin socket outlet 5 Amps on same board

M&L point wiring for power point with 2.5 sqmm (nominal area) copper conductor FRLS cable ( multi-stranded) PVC insulated and unsheathed electric cable 1100 Volts drawn through PVC casing capping of suitable size(as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board with 3mm thick plastic laminated Hylum Sheet /gang box of suitable size and shape and Modular sunken boxes for mounting light points etc covered ISI marked for following complete all as specified and directed by Engr-in-Charge. Note:- Screw used for fixing TW baords, casing and caping ceiling rose, square blocks etc should be nickel cadmium screws.Make: Havells/Polycab/Grandlay.

S & F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge. Make: Havells/Anchor/Legrand

S&F Socket outlet 2 in 1, 3 pin, 6A (multipurpose) suitable for 3 pin / 5 pin plug complete all as specified and directed by Engir-in-Chage. Make: Havells/Anchor/Legrand

S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage. Make: Havells/Anchor/Legrand

S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.Make: Havells/Anchor/Legrand

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.Make: Havells/Anchor/Legrand

Supply and fixing Rechargeable LED Bulb 9 W ,220 V, white color all as specified and as directed.

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 20 W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed. Make: HAVELLS /wipro/CG/Phillips or equivalent .

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.Make: HAVELLS /wipro/CG/Phillips or equivalent .

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete Make: HAVELLS Grandlay/Philips

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 12 way complete all as specified and directed. Make :Legrand/Schneider/ABB.

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed. Make :Legrand/Schneider/ABB.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make :Legrand/Schneider/ABB.

Supply and fixing 415V, 10 KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning (i) TPN/FP 16 to 32 . Make :Havells/Legrand/L&T

Supply and fix and replacement after taking down the old unserviceable LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make :Havells/Grandlay/Philips

Supply & Fixing LED light fitting 1X10W bulkhead luminaires including LED light and driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed. Make :HAVELLS /CG/Phillips.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

M & L for GI Pipe (medium grade,ISI Marked) 32 mm dia ,1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light complete all as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable complete all as specified and directed. Make :HAVELLS /Grandlay/Phillips.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm Make : Bajaj/Legrand/Anchor all as specified and directed.

Supply, laying, fixing, passing through pipe or laid in trenches and testing underground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 16 sqmm 4 core complete all as specified and directed.

One bell /buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 sqmm size complete all as specified and directed.

Supply and fixing Bell push, flush type 5 amp complete all as specified and directed.

Supply and fixing Bell/Buzzer, Ding Dong AC 230 volts, single pole complete all as specified and directed.

Supply and fixing engagement light red and green in colour zero watts complete all as specified and directed.

Deduct Schedule of Credit of Rs (-) 54,995/- (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

osho traders (BID ID -3406517)

Rampal Singh Contractor (BID ID -3406782)

M/S HONY CAPT RIGZIN SAMPHEL (BID ID -3406209)