Construction of New Toilet at Ellis nagar TNSTC campus in ward no 59

Amount

Charges for putting bore holes of size 23cm of pile foundation hard stage of sandy clay other bulb rate to fix all labours for boxing hire charges for boring set and all other T & P employed etc., complete

Earth work excavation in all kinds of soil except hsr rock requiring blasting inclusding of shoring strutting and bailing out of water whenever necessary etc., complete

Supplying and filling in foundation and basement with Msand in layers of not more than 15cm thick well rammed and consolidated including watering complying with standard specification etc.complete.

Plain Cement Concrete 1:5:10 (one cement, five fine aggregates and ten coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supplying and erecting shuttering with necessary supports for plith beam with all cross brancings etc..,complete

Supplying fabricating and placing in position of MS grills for reinforcement rate inc. the cost of steel for all works (the rate to include cost of binding wire also).

Reinforced Cement concrete 1:2 :4 (one cement, two sand and four course aggregate) using 20mm gauge HBD chips for machine broken including consolidation for foundation wherever necessary complete. Foundation and Basement

Brick work in CM 1:5 (one cement & five sand) using Foundation and Basement

Brick work in CM 1:5 (one cement & five sand) using Ground Floor Super Structure

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Weathering course 80mm thick with concrete broken brick jelly with 20mm size in pure slacked lime (on sand) over roof slab the preparing of brick jelly lime being 32cft 121/2 well beaten with wooden beaten to the required slope and thickness.

Finishing the top of weathering course with one course of pressed tiles 20cm x 200 mm x 20mm size laid in cm 1:3 (one cement three sand) mixed with crude oil 10% by weight of cement used and pointing the same oil mortar etc.,

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door : Providing and fixing casement dor fabricated from un-palsticized polyvinyl chloride (UPVC) sections. Profiles. The profiles should be three chamber system which provides hugh insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. hardware : All the hardware like friction stays, handle should be designed be glazed with 5mm plain floats glass / 6mm bison lam installation : the profiles should be designed such be cut to lenght and welded 45 degrees. The window should be designed such that the water drianage does not pass through the reinforcement chamber. The window system should be fixed directed to the plastered brick wall using self expanding nylon plug and driving ms electro plated screws into plug.

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers

Supplying fixing S.W. Gully trap of size 150mm x 100mm with cast iron gratings

Construction of inspection chambers of sizes 0.60 x 0.60m following brick jelly cement concrete in cm 1:5:12 1/2 using 40mm size brick jelly of cm 1:5 with covering slab 600mm x 600mm incl all earth work excavation refilling with base concrete etc.complete.,

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

White washing two coats with lime stone including gum and conjee water etc., complete

Fabrication supply and fixing of fully paneled double leaf steel door made of 40x40x6mm MS angle for outer frame and shutter made out of 35x35x6mm MS angle with necessary stiffness 32x6mm and flats at 30cm interval and necessary cross diagonal MS flats. The shutter frame should be fully covered by 18G GR sheet and provided with required locking arrangements and one coat of red oxide paint and primer etc…

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Dadooring the colour glazed wall tiles of size 305mmx200x6mm pardon cement morter 1:2 10mm thick and pointing with white cement using 0.40kg/m2 including finishing the joints and pointing flesh with total surface etc., complete

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement Colour

R.C.C.Jolly by a new of following size in R.C.C.1:1.5:3 using 20 mm gauge hard broken granite ston jelly and rivers and excluding cost of reinforcement but including charges, fabrication charges curing neat finishing and labour charges for fixing the jolly in position with standard spefication

Wiring with 2x1.5 sq.mm. PVC insulated SC unsheathed FRL Scopper conductor cable of 1100V grade in suitable heavygaugeMSconduitpipeonwallandceilingwithMSaccessorieswithswitchboxwith5AFTswitchinflushwithwallandcoveredwithhylumsheetof3mmthickwithpaintingofsuitablecolourwithcontinuousearthwireconnectionof 1.5 sq.mm copper wire for light point / fan point (for electronic regulator)

Supply and fixing of single box type 4'40W flu Fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu. Tube with PVC unsheated leads from terminals to the fitting.

Supply and delivery and fixing of PVC Pipes and specials 6" PVC Pipe

4" PVC Pipe

1" PVC Pipe

1" PVC Elbow

Waste Not Tap

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., 1000Ltr

Add GST 18%

PITCHAIMANI N (BID ID -1331623)