NIT No. 12 item No. 1 (24-25) EE (T)/EE(EnM)M-4

Providing of Non-clog sewage pump with CI Impeller, CI Body, EN-8 Shaft & Sleeve ; RPM: 1450, Discharge: 600-700 m³/hr, Head: 9-12 mtr. Suction/Delivery-200X200mm Make: WILO M&P/KBL/JYOTI/DJB approved Supply of 60 Hp, 1450 rpm, Standard Totally Enclosed Fan Cooled (TEFC), Enclosure Conforming to protection IP55 as per IS:4691‐1968, suitable for operation on 415±10%, 3‐Phase, 50Hz±5%, AC Supply with class 'F' insulation for an ambient of 50 Deg.C Make: CG/Kirloskar/ABB/DJB approved make. Providing of coupling & guard, base frame etc. for above pump set.

Providing of Non-clog sewage pump with CI Impeller, CI Body, SS Shaft & Sleeve ; RPM: 1450, Discharge: 350 m³/hr, Head:16 mtr. Make: WILO M&P/KBL/JYOTI/DJB approved Providing of coupling & guard, base frame etc. for above pump set.

Providing the Sluice valve IS:14846,PN:1.0 size 200 mm.(DJB SOR 4.12.6) Make : Kirloskar/IVC/ Any other DJB approved

Providing the NRV IS:5312, PN:1.0 size 200 mm (DJB SOR 4.9.8) Make : Kirloskar/IVC/ Any other DJB approved

Providing the Sluice valve IS:14846,PN:1.0 size 150 mm.(DJB SOR 4.12.5) Make : Kirloskar/IVC/ Any other DJB approved

Providing the NRV IS:5312, PN:1.0 size 150 mm (DJB SOR 4.9.7) Make : Kirloskar/IVC /Any other DJB approved

Providing the Sluice valve IS:14846,PN:1.0 size 100 mm.(DJB SOR 4.12.5) Make : Kirloskar/IVC /Any other DJB approved

Providing of 100 mm dia. Kinetic air valve+ISV:CI.(DJB SOR 4.16.4) Make- Kirlosker/ IVC / Any other DJB approved

Fabrication/Supply of the Suction line /Bend (1Nos.)/clamp for suction line(01Nos.), made out from B class M.S Pipe Size 200 N.B 6 mtr. approx. duly flanged as per site requirement.

Providing the Delivery line gap piece,/Bend (1Nos.) made out from B class M.S Pipe Size 200 N.B. duly flanged as per site requirement.

Fixing of MS Base frame on the 60 HP pump-set foundation, Suction /Delivery lines, Valves, gap pieces by electric welding set, manual labour, alignment the pump/ motor, fixing of MS delivery line in the existing pumping main and also making electric connection of the pump sets etc.

Making/ Casting the new foundation with the rich RCC mixture upto 200 m.m height suitable for 60 H.P pump sets. i/c providing the foundation bolts (6 nos. each) and vibrating pad (6 nos.) & fixing the same in the foundation before casting etc. as required.

Fabrication/Supply of the Suction line /Bend (1Nos.)/clamp for suction line(1Nos), made out from B class M.S Pipe Size 150 N.B 6 mtr. approx. duly flanged as per site requirement.

Providing the Delivery line gap piece,/Bend (1Nos.) made out from B class M.S Pipe Size 150 N.B. duly flanged as per site requirement.

Providing the hard ware goods for erection the suction and delivery line at site(it include rubber packing, nut & bolts, flange etc.

Providing and erecting temporary barricading at site direction of Engineer-in-Charge which includes writing and painting arrangement. for work at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position as required during the execution of the entire work till its completion. Safety arrangement like Air Face Mask, Air Line, Helmet, Gum Boots, Hand Gloves, Safety Belts, Portable Ladder, First Aid Box, Caution Tape, Barrier Cone, Litmus Paper, Torch, etc arranged by the firm at site of work for safe working.

Fixing of MS Base frame on the 40 HP foundation, Suction /Delivery lines, Valves, gap pieces by electric welding set, manual labour, alignment the pump/ motor, fixing of MS delivery line in the existing pumping main and also making electric connection of the pump sets etc.

Repair/renovate the boundary of sump well/opening/ by electric welding set, manual labour and civil work as per site requirement.

Providing /Fixing of MS Header made out from B class M.S. pipe Size 300 N.B. duly flange(2Nos) ,dead flange(2Nos.) Length=12meter approx, ( it include providing support to header) and connecting Suction /Delivery lines, Valves,Air Valve,bend, gap pieces by electric welding set, manual labour, alignment the pump/ motor, fixing of MS delivery line in the existing pumping main and also making electric connection of the pump sets etc.

Testing commissioning the same on NO load/ Full Load. With to and Fro charges.

Goodwill Enterprises (BID ID -1556824)

Gupta Brothers (BID ID -1556845)

Raj Engineering Co. (BID ID -1556799)

HYDROCON ENGINEERS (BID ID -1556210)