REPAIRS TO MANGALORE TILES ROOF, REPAIRS TO EAVES BOARD, VALLEY GUTTERS AND CERTAIN MISC B/R WORKS IN MD ACCN AT CME

Amount

Dismantling tiling of single layer Mangalore Pattern roof tile laid dry complete all as specified and directed

All as per item No 01 above but bedded in lime or cement mortar complete all ,as specified and directed.

M&L for roof tiles, Mangalore Pattern, interlocking at side joints laid dry, including dismantling tiling of single layer Mangalore Pattern roof tile complete all as specified and directed.

All as per item No 03 above but except tile complete.

M&L for ridge tiles, Mangalore Pattern, set and jointed in CM 1:6 complete all as specified and directed.

All as per item No 05 above but except Mangalore Pattern ridge.

M&L for preparation of mangalore tile surface including brooming down, steel wire,brushing scrapping down smoke soot, moulds, moss, algea etc and applying two coats of premium acrylic emulsion paint (roof guard) alkali & fungal resistance dirt resstance exterior paint of required shade over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed. Note: (1) Work to be carried out at approximate 10-15 mtr height all as specified and directed. (2) The rate shall be quotted by the contractor including scafolding to carry out the work for height more than 10.00 mtrs.

Dismantling battens for tiles, shingles etc, of any size including tilting fillets spacing exc 15 cm complete all as specified and directed.

M&L 2nd class hardwood clean sawn battens at 30cm centres of sectional area exc 5 & n.exc 15 sqcm complete all as specified and directed.

All as per item No 9 above but except battens

Dismantling timber scantling 40 sqcm and over in section in any position in unframed work complete

M&L second class hard wood clean sawn in scantling fixed in framed work complete all as specified and directed.

M&L for preparing the surfaces of tiles battern any size and spacing prepared and treated all over (measured overall on one side only),spaces not deducted with two coats of cresote oil complete all as specified and directed.

All as per item No 13 above but one coat on old batter surface

M&L for preparing new surface of wood of any decription, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all, as specified and directed.

Dismantling boarding , any description in any position with nails complete

M&L 2nd class hardwood clean sawn weather boarding, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

S&F Framed work such as roof trusses(framed), trusses purlins, crane gantries , rails and fastenings and heavy bracket framing(beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W(Gde E-250) Quality A complete all as specified and directed.,

Dismantling of wrought iron or mild steel work of any description

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc. complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley, gutters etc. complete all as specified and directed.

S & F for 0.63 mm thick plain, galvanised ,mild steel sheeting , in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed ) with grade of zinc coating 275 etccomplete all as specified and directed

S&F Galvanised, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with J hooks and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

M&L for removing of trees any size alongwith grass roots from surroundings of water storage tanks by manually with the help of sharp tools and filled up small holes with PCC (1:2:4) Type B0 (12.50mm graded stone aggregate) finished surface even and smooth without using extra cement complete all as specified and as directed

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using porpose made members interlocking to each other and with with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work : Armstrong/Swastik/Techno Grid and Make E board Gypsum or equivalent approved .

S& F in repair 4mm thick designer 'E' board to replace damaged ceiling board complete all as speified and directed

M &L Repair to existing, GI grid, angle,cross tee, GI wire for adjusting level, making holes and proper sealing and finishing of joints between wall and GI frame complete all as speified and directed

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Cement concrete type B1 (1:2:4) using 20mm grades stone aggregate as in copings filling of gap in between roof sheet and brick work of surrounding walls and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as spd.

M&L for cleaning roof surfaces/valley gutters by removing bushes, leaves, grass etc Note: (1) Work to be carried out at approximate 10-12 mtr height all as specified and directed. (2) The rate shall be quotted by the contractor including scafolding to carry out the work for height more than 10.00 mtrs.

Demolition and breaking up drain pipes 100mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed

S&F in repair 75mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Demolition of precast concrete items & block masonry built in cement mortar complete all as specified and directed.

M&L for pre-cast PCC block masonary type C-1, 1:3:6 exc 10 cm width and set in CM 1:6 complete all as specified and directed.

M&L 15mm thick cement plastering on block/stone masonry surfaces in CM 1:4 finishing the surface even and smooth without using extra cement complete all as specified and directed.

S&F 750 Ltr capacity rotational moulded polyethylene water storage tanks(Cylindrical vertical with closed top)hoisted and fixed in position all as specified in SSR Part-I including dismantling/demolition (PVC/RCC/Stone & PCC block masonry) of old unserviceable water tank of capacity exc 500 & nexc 1000 ltrs and 20mm bore dia of pipe ball brass valves, high pressure, with polyuthene float and flynut complete , screwed for iron pipe or brass ferrule and fixed including rubbish off debris beyond 100 m & n.exc 250 m complete all as specified and directed.

Taking up or down GI steel Tubing of 15 mm bore of pipe connections including all fittings or removal to store complete all as pecified and directed.

Taking up or down GI steel Tubing of 20 mm bore of pipe connections including all fittings or removal to store complete all as pecified and directed.

S & F galvanised iron tubing 15 mm bore of pipe medium grade with and including all fittings & fixed complete to wall & ceiling or laid on floors including clamps all as specified and directed

S & F galvanised iron tubing 20 mm bore of pipe medium grade with and including all fittings & fixed complete to wall & ceiling or laid in floors including clamps all as specified and directed

Refixing old GI tubing 15 mm bore of pipe and fittings, to walls and ceiling or laying in floors in new or old position including cleaning as directed.

Refixing old GI tubing 20 mm bore of pipe and fittings, to walls and ceiling or laying in floors in new or old position including cleaning as directed.

Aakar Construction (BID ID -3403243)

vishalconstruction (BID ID -3403329)

Sunrise Traders (BID ID -3403286)

Decent Decorators (BID ID -3403482)

BSK Construction (BID ID -3403822)

ShreHari Civil Enginneering and Contractors (BID ID -3403087)