(CM Monit) Construction of hall bela ki wabri Gwalior. file no.284/25X3/3

ALL KINDS OF SOIL

CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE

"FOUNDATIONS, FOOTINGS, BASES OF COLUMNS, ETC. FOR MASS CONCRETE."

"COLUMNS, PILLARS, PIERS, ABUTMENTS, POSTS AND STRUTS."

"LINTELS, BEAMS, PLINTH BEAMS, GIRDERS, BRESSUMERS AND CANTILEVERS."

"SUSPENDED FLOORS, ROOFS, LANDINGS, BALCONIES AND ACCESS PLATFORM."

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

"REINFORCED CEMENT CONCRETE WORK IN BEAMS, SUSPENDED FLOORS, ROOFS HAVING SLOPE UP TO 15° LANDINGS, BALCONIES, SHELVES,

"FILLING BY AVAILABLE EXCAVATED EARTH (EXCLUDING ROCK) IN TRENCHES, PLINTH, SIDES OF FOUNDATIONS ETC. IN LAYERS NOT EXCE

THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE)

CEMENT MORTAR 1:6 (1 CEMENT : 6 COARSE SAND)

CEMENT MORTAR 1:6 (1 CEMENT : 6 COARSE SAND)

EXTRUDED SECTION PROFILE SIZE 48X40 MM.

"25MM THICK PVC FLUSH DOOR SHUTTERS MADE OUT OF A ONE PIECE MULTI CHAMBER EXTRUDED PVC SECTION OF THE SIZE OF 76

1:4 (1 CEMENT: 4 SAND)

1:3 (1 CEMENT: 3 FINE SAND)

1:6 (1 CEMENT: 6 SAND)

"PROVIDING AND APPLYING 1.0 MM THICK WHITE CEMENT BASED WALL PUTTY OF BEST QUALITY, OVER PLASTERED SURFACE TO PREPARE TH

TWO COATS.

"PROVIDING AND LAYING WATER PROOFING TREATMENT ON ROOFS OF SLABS BY APPLYING CEMENT SLURRY MIXED WITH WATER PROOFING CEM

"PROVIDING AND LAYING VITRIFIED FLOOR TILES (WITHOUT SOLUBLE SALT) OR PRINTED (WITH SOLUBLE SALT) NANO POLISHED (GLOSSY

"PROVIDING AND LAYING VITRIFIED FLOOR TILES (WITHOUT SOLUBLE SALT) OR PRINTED (WITH SOLUBLE SALT) NANO POLISHED (GLOSSY

RAJ NAGAR PLAIN WHITE MARBLE/ UDAIPUR GREEN MARBLE/ ZEBRA BLACK MARBLE.

MIRROR POLISHING ON MARBLE WORK/GRANITE WORK/STONE WORK WHERE EVER REQUIRED TO GIVE HIGH GLOSS FINISH COMPLETE.

"PROVIDING AND FIXING STAINLESS STEEL ( GRADE 304) RAILING MADE OF HOLLOW TUBES, CHANNELS, PLATES ETC. INCLUDING WELDING

POWDER COATED ALUMINIUM (MINIMUM THICKNESS OF POWDER COATING 50 MICRON)

POWDER COATED ALUMINIUM (MINIMUM THICKNESS OF POWDER COATING 50 MICRON)

WITH FLOAT GLASS PANES OF 4.0 MM THICKNESS

WITH GLASS PANES OF 4.0 MM THICKNESS

FIXED TO STEEL WINDOWS BY WELDING.

"PROVIDING AND FIXING M.S. TUBULAR FRAMES FOR DOORS, WINDOWS, VENTILATORS AND CUPBOARD WITH ANY SECTION MADE OF 1.60MM O

"35 MM THICK INCLUDING ISI MARKED STAINLESS STEEL BUTT HINGES WITH NECESSARY SCREWS."

RECTANGULAR OR SQUARE.

ORISSA PATTERN W.C. PAN OF SIZE 580X440 MM

"WHITE VITREOUS CHINA FLAT BACK WASH BASIN SIZE 450X300 MM WITH SINGLE 15 MM C.P. BRASS PILLAR TAP."

32MM DIA

15 MM NOMINAL BORE 0.40KG

15 MM NOMINAL BORE 0.40KG

PROVIDING AND FIXING C.P. BRASS ANGLE VALVE FOR BASIN MIXER AND GEYSER POINTS OF APPROVED QUALITY CONFORMING TO IS:8931

"C.P.BRASS FITTING PROVIDING AND FIXING C.P. BRASS BIB COCK OF APPROVED QUALITY CONFORMING TO IS:8931 - 15 MM NOMINAL BO

"450MM LONG TOWEL RAIL WITH TOTAL LENGTH OF 495MM, 78MM WIDE AND EFFECTIVE HEIGHT OF 88MM, WEIGHING NOT LESS THAN 170

"PROVIDING AND FIXING PTMT LIQUID SOAP CONTAINER 109MM WIDE, 125MM HIGH AND 112MM DISTANCE FROM WALL OF STANDARD SHAPE W

SPUN CAST IRON S&S AS PER IS - 3989

110MM DIA

15 MM NOMINAL OUTER DIA .PIPES.

20 MM NOMINAL OUTER DIA .PIPES.

25 MM NOMINAL OUTER DIA .PIPES.

32 MM NOMINAL OUTER DIA .PIPES.

40 MM NOMINAL OUTER DIA .PIPES.

50 MM NOMINAL OUTER DIA .PIPES.

50 MM DIA. NOMINAL BORE

80 MM DIA. NOMINAL BORE

25 MM NOMINAL BORE

32 MM NOMINAL BORE.

40 MM NOMINAL BORE

50 MM NOMINAL BORE

VERTICAL

VERTICAL

VERTICAL

VERTICAL

ALL KINDS OF SOIL

CUTTING HOLES UP TO 15X15 CM IN R.C.C. FLOORS AND ROOFS FOR PASSING DRAIN PIPE ETC. AND REPAIRING THE HOLE AFTER INSERTI

"PROVIDING AND PLACING ON TERRACE AT ALL FLOOR POLYETHYLENE WATER STORAGE TANK ISI : 12701 MARKED WITH COVER AND SUITABL

LIGHT POINT/FAN POINTS.SHORT POINT

LIGHT POINT/FAN POINTS.SHORT POINT

LIGHT POINT/FAN POINTS.SHORT POINT

3 PIN 6 AMP SOCKET OUTLET ON SEPARATE BOARD SHORT POINT

3 PIN 6 AMP SOCKET OUTLET ON SEPARATE BOARDMEDIUM POINT

3 PIN 6 AMP SOCKET OUTLET ON SEPARATE BOARDLONG POINT

TWIN CONTROL LIGHT POINTS.SHORT POINT

TWIN CONTROL LIGHT POINTS MEDIUM POINT

TWIN CONTROL LIGHT POINTS LONG POINT

"POINT WIRING INCLUDING METALLIC SWITCH BOX, SHEET, SWITCHES, SOCKETS FOR 3 PIN 6 AMP. SOCKET OUTLET POINT WITH 1.5 SQ.

2X2.5 SQ.MM.

4X2.5 SQ.MM.

6X2.5 SQ.MM.

SHORT POINT ON SEPARATE BOARD

MEDIUM POINT.ON SEPARATE BOARD

LONG POINT.ON SEPARATE BOARD

ON SEPARATE BOARD EXTRA LONG -I

SAME BOARD SOCKET 16 AMP

SUPPLYING AND FIXING PVC CONDUIT ISI MARKED ALONG WITH THE ACCESSORIES ON SURFACE ETC. AS REQUIRED

1 OR 2 MODULE

4 MODULE

6 MODULE

8 MODULE

2.5 SQ MM CABLE IN 20 MM CONDUIT

4.0 SQ MM CABLE IN 20 MM CONDUIT

6.0 SQ MM CABLE IN 25 MM CONDUIT

10.0 SQ MM CABLE IN 25 MM CONDUIT

50 AMP TO 63 AMP RATING SINGLE POLE & NEUTRAL(SPN)

6 AMP TO 32 AMP RATING SINGLE POLE & NEUTRAL(SPN)

50 AMP TO 63 AMP RATING FOR TRIPLE POLE & NEUTRAL(TPN)

6 AMP TO 32 AMP RATING FOR TRIPLE POLE & NEUTRAL(TPN)

6 AMP TO 32 AMP RATING

6 WAY DOUBLE DOOR

8 WAY DOUBLE DOOR

"SUPPLYING, FIXING,TESTING & COMMISSIONING WALL / FLOOR MOUNTED LT PANEL PRIMER COATED WITH TWO COAT OF ENAMEL PAINT & P

FREQUENCY METER

COPPER BUS BAR STRIPS WITH PVC SLEEVES

ALUMINIUM BUS BAR STRIPS WITH PVC SLEEVES

LED LAMPS

2 X 2.5 SQ MM 2 WIRE SUB-MAIN

2 X 4.00 SQ MM 2 WIRE SUB-MAIN

2 X 6.00 SQ MM 2 WIRE SUB-MAIN

2 X 10.0 SQ MM 2 WIRE SUB-MAIN

4 SQ.MM.((HEAVY DUTY) UNARMOURED 2 CORE

70 SQ.MM(XLPE) ARMOURED 3½ CORE

"LAYING OF ONE NUMBER PVC INSLUATED AND PVC SHEATED POWER CABLE OF 1.1KV GRADE OF SIZE NOT EXCEEDING 25 SQ.MM DIRECT IN

2 / 3 / 4 CORE CABLE UPTO 16 SQ.MM

3 / 3½ / 4 CORE CABLE 25 SQ.MM TO 120 SQ.MM

"EARTHING WITH COPPER EARTH PLATE 600MM X 600MM X 3MM THICK INCLUDING ACCESSORIES AND PROVIDING MASONARY ENCLOSER IN CEM

"ADD EXTRA FOR USING SALT AND CHARCOAL / COKE FOR G.I. PLATE OR COPPER PLATE EARTH ELECTRODE AS REQUIRED INCLUDING EXCAV

"SUPPLING AND FIXING OF APPROVED MAKE STEP TYPE ELECTRONIC FAN REGULATOR INCLUDING CONNECTION ETC. AS REQUIRED ON EXISTI

SMALL SIZE

CEILING FAN (ENERGY SAVER 50 W)-1200 MM SWEEP

300MM SWEEP 900 RPM

22/24WATT, COLOR TEMP 3000-6500K AS REQUIRED.

TUBE LIGHT LED 1X20/22 WATT INTEGRAL I/C BATTEN ALUMINIUM BODY, PC DIFFUSER

ALL KINDS OF SOIL

CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE

CEMENT MORTAR 1:6 (1 CEMENT : 6 COARSE SAND)

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE)

1:6 (1 CEMENT: 6 SAND)

6 MM CEMENT PLASTER 1:3 (1 CEMENT: 3 FINE SAND) FINISHED WITH A FLOATING COAT OF NEAT CEMENT AND THICK COAT OF LIME WASH

PER BAG(50KG)OF CEMENT USED IN MIXED

SAND CAST IRON S&S PIPE AS PER IS : 1729

SUPPLYING AND FIXING C.I. COVER WITHOUT FRAME FOR MANHOLES : 455X610 MM RECTANGULAR C.I. COVER (LIGHT DUTY) THE WEIGHT O

PROVIDING AND LAYING AND JOINING SALT GLAZED STONE WARE PIPE SOCKET AND SPIGOT ISI MARKED AS PER IS 651-2007

PROVIDING AND LAYING CEMENT CONCRETE GRADE M-5 (NOMINAL MIX)40MM NOM. SIZE STONE -150MM DIA SW PIPE

CHAMBER INSIDE DIMENSIONS 455X610 MM AND 45 CM DEEP FOR SINGLE PIPE LINE

CEMENT MORTAR 1:6 (1 CEMENT : 6 COARSE SAND)

1:4 (1 CEMENT: 4 SAND)

REPLACEMENT OF M.S. FOOT RESTS IN MANHOLES INCLUDING DISMANTLING CONCRETE BLOCKS AND FIXING WITH 20X20X10 CM CEMENT CONC