Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.8 LAccepted-Finance HIMACHAL PRADESH HP | SOLAN | HIMACHAL PRADESH | 173202 | ₹3.8 L | L1 | Accepted-Finance DUE TO LOWEST AMOUNT |
| 2 | L2₹3.8 LRejected-Finance | ₹3.8 L | L2 | Rejected-Finance DUE TO HIGHEST AMOUNT |
Tender Value
₹3.8 L
EMD Value
₹7,600
Closing Date
9 Apr 2026, 5:00 pmClosed
EXECUTIVE ENGINEER DAULATPUR CHOWK DIVISION
EXECUTIVE ENGINEER DAULATPUR CHOWK DIVISION
Repair Renovation Building of Govt Degree College Daulatpur Chowk Tehsil Ghanari District Una HP SH Repair Renovation of Boys Toilets Under Deposit
2026_PWD_133172_1
REPAIR AND RENOVATION BUILDING OF GOVT DEGREE COLLEGE DAULATPUR CHOWK TEHSIL GHANARI DISTT UNA HP
Open Tender
Civil Works
90 days
DAULATPUR CHOWK
Please refer Tender documents.
3 documents required · 3 mandatory
₹350
₹7,600
27 Apr 2026
2 Apr 2026
10 Apr 2026
2 Apr 2026
9 Apr 2026
2 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as per the direction by the Engineer in charge and including entire carriage of materials within all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. | - | Per Square meter | - | - |
| 2 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacture's specification. Two or more coats on new work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octori, royality, Malkana, toll tax, GST or other taxes imposed by the Government. | - | Per Square meter | - | - |
| 3 | Repairs to plaster With cement mortar 1:4 (1 cement : 4 fine sand) of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including Repairs to plaster With cement mortar 1:4 (1 cement : 4 fine sand) of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. | - | Per Square meter | - | - |
| 4 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimeter) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 (Indian Standard: fifteen thousand six hundred twenty two) of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimeter) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with greycement slurry @ 3.3 kg/sqm (three point three kilogram per square meter) including pointing the joints with white cement and matching pigment etc., complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government | - | Per Square meter | - | - |
| 5 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS :15622 (Indian Standard: fifteen thousand six hundred twenty two)(thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimeter) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three point three kilogram per square meter) including pointing in white cement mixed with pigment of matching shade complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government | 1 | Per Square meter | - | - |
| 6 | Providing and fixing aluminium work for doors, windows, ventilators and partitions make of Hindco Co., Jindal India Aluminum Co. with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge for fixed portion (Powder coated aluminium (minimum thickness of powder coating 50 micron) (Glazing, paneling and dash fasteners to be paid for separately) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. | - | Per Kilogram | - | - |
| 7 | Providing and fixing aluminium work for doors, windows, ventilators and partitions ake of Hindco Co., Jindal India Aluminum Co. with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately Powder coated aluminium (minimum thickness of powder coating 50 micron) as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government. | 1 | Per Kilogram | - | - |
| 8 | Providing and fixing glazing with float glass panes of 5 mm (five millimeter) thickness (weight not less than 12.50 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. | - | Per Square meter | - | - |
| 9 | Providing and fixing fly proof Stainless steel (grade 304) wire gauze of 0.5 mm (zero point five millimeter) dia wire and 1.4 mm (one point four millimeter) aperture on both sides wire gauge to windows clerestory windows and doors with M.S. Flat 15x3 mm (fifteen into three millimeter) and nuts and bolts complete.including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. | - | Per Square meter | - | - |
| 10 | Providing and fixing Backlight sheet, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government. | - | Per Square meter | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.65 MB
Tendernotice_2.pdf
PDF • 0.12 MB
SBD4.pdf
Tender Documents • 4.22 MB
BOQ_196947.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid