Repair Work/Maintenance Work in A.R.T.O. Office at Distrct Jalaun

Demolishing brick tiles covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Demolishing mud phaska in terracing and disposal of unserviceable material within 50 metres lead

Earth work in excavation by mechanical means (Hydraulic excavator) / in manual means in foundation trenches or drains (not exceeding 1.5 m width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars

12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary but hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick pre-laminated Partical Board (decorative lamination on both sides) grade -1, medium density flat pressed, three layer particle board FPT- | or graded wood particle board FPT- |, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS : 12823, Grade 1, Type - II marked.

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately

Float glass panes 4 mm thick 4 mm thick glass pane (weight not less than 10 kg/sqm)

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sgm including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Paymentfor grouting of joints to be made separately).

Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm)

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces (Two coats)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete (200x10 mm )

Providing and fixing bright finished brass handles with screws etc. complete: (125 mm)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to 1S:8931 (15 mm nominal bore )

Providing and fixing brass bib cock of approved quality (15 mm nominal bore )

Providing and fixing gun metal gate valve with C.l. wheel of approved quality. 20 mm nominal bore

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing (Rectangular shape 453x357 mm )

Providing and placing on terrace (at all floor levels polyethylene water storage IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

crompton Centrifugal Self Priming Mono block Pump. ( As Per GEM Portal)

Providing and fixing kitchen sink with C.l. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass wastecomplete, including painting the fittings and brackets, cutting and making good the walls wherever required White glazed fire clay kitchen sink of size 600x450x 250 mm

Wiring Of Light point/Fan point/exhaust Fan point/ cell bell point with 1.5 sqm mm FRLS PVC Insulated copper conducter single core cable in surface / rcessed steel conduit with piano type switch , phenolic laminated sheet, suitable size MS Box and earthing the point with 1.5 sq mm FRLS PVC insulated copper insulated copper conducter single core cable etc as required ( GROUP B )

Supplyng nd fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. ( 20 mm )

Supplying And fixing Metal Box Of following Size ( Nominal Size) on surface or in receses with suitable size of pheonlic laminated sheet cover in front including painting etc as required.

Supplying and fixing following piano type switch/ Socket on the existing switch box / cover including connection etc as required (A) 5/6 amps Switch

Supplying and fixing following piano type switch/ Socket on the existing switch box / cover including connection etc as required (A) 5/6 amps Switch

Supply And Drawing following sizes of FRLS PVC insulated copper conducter , single core cable in the existing surface/ recesesd steel/PVC Conduit as required. ( 2x 1.5 Sq mm)

Supply installation testing and commissioning of 1200 mm Sweep, BEE 5 Star rated ceilling fan with Brush Less Direct current ( BLDC) motor, Class of insulation. ( as per DSR Elec-19.1)

Please Enable Macros to View BoQ information