Loading
Loading…
Loading…
Tender Value
₹25.5 L
EMD Value
₹50,980
Closing Date
25 Aug 2026, 6:00 pmDue tomorrow
GE 869 EWS
GE 869 EWS PIN-913869 C/o 99 APO
ADDN/ ALTN TO BLDG NO T-768,T-769 AND T-385 AT LEIMAKHONG MIL STN UNDER GE 869 EWS.
2026_MES_782446_1
8773/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹50,980
Yes
3 Aug 2026
3 Aug 2026
26 Aug 2026
3 Aug 2026
25 Aug 2026
18 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Schedule 'A' | |||||
| 1.01 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. | 278 | Sqm | - | - |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified. | 145 | Sqm | - | - |
| 3 | S&F Pre-Painted galvantume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified. | 75 | Sqm | - | - |
| 4 | S&F 0.50mm thick plain, aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing length and girth as fixed complete all as specified and directed. | 8 | Sqm | - | - |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. | 13.2 | Qtl | - | - |
| 6 | M&L for structural steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed. | 1,100 | Kg | - | - |
| 7 | S&F steel work in tubular or square trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410-W (Gde-E-250 quality A) complete all as specified and directed. | 220 | Kg | - | - |
| 8 | M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. | 10 | Sqm | - | - |
| 9 | M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. | 60 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
TENDER8773.pdf
Tender Documents • 1.84 MB
BOQ_876601.xls
BOQ • 0.49 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].