REPAIRS TO WOODEN FURNITURE UNDER GE CHENNAI

Amount

BIN SOILED LINEN LARGE/SMALL (FD-244) Removing the following unserviceable parts of Bin Soiled Linen and supply and fix new parts all as specified in drg and directed:-

Top of 6mm thick plywood one side teak veneered of size 900mm x 450mm with teak wood edging 4mm thick alround duly polished the replaced parts to match with existing parts.

Front side 6mm thick commercial plywood of size 800mm x 240mm duly polished the replaced parts to match with existing parts.

Back side of 6mm thick commercial plywood of size 800mm x 240mm duly polished the replaced parts to match with existing parts.

First class teakwood legs of size 45mm x 25mm / 45mm x 45mm alongwith frame of size 740mm x 390mm and nylon buffers of size 40 x 20mm duly polished the replaced parts to match with existing parts..

Stainless steel butt hinges of size 75mm duly fixed with MS screws as specified in the drg.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard / md accns or unit lines under the AOR of GE Chennai.

BIN LINEN MULTIPURPOSE WITH IRONING BOARD (FD/E6/MAP/09) : Removing the following unserviceable parts of BIN LINEN MULTIPURPOSE W / IRONING Board and supply and fix new parts all as specified and shown in drawing and as directed:-

Doors / Shutters in two parts of size 655mm x 835mm made out of pre-laminated particle board 18mm thick, exterior grade with matching lamination shade on both side of approved make duly fitted with Piano hinges, Chromium plated MS handles 2 Nos and edging with 4mm thick first class teak wood beading all around complete all as specified in drg and directed. Note:- Double leaf shutter shall be measured as one unit.

Drawer made out of 18mm prelaminated particle board exterior grade with matching lamination shade on both sides and 12mm thick teak wood plank on sides and rear with 6mm thick plywood bottom including provision of chromium plated handles. All exposed replaced parts shall be french polished in Glossy finish to match with existing parts.

Side portion / Base of pre-laminated particle board 18mm thick exterior grade with matching lamination shade on both sides of approved make all as specified and as directed..

Back side of 6mm commercial plywood all as shown in the drawing all as specified and as directed.

Base made with pre-laminated particle board 18mm thick exterior grade with matching lamination shade on both sides by providing edging with 4mm thick first class teak wood beading duly polished all around complete as in drawing all as specified and directed. Note : 04 Corners/pieces of base is considered as 01 frame.

BOOK SHELF OPEN SMALL (DB-4121) Removing the following unserviceable parts of book shelf open small and supply and fix new parts duly french polished to match with existing parts all as specified, shown in drawing and as directed:-

Bottom made out of 18 / 19mm thick commercial plywood of approved make BWR grade.

Shelf made out of 15mm thick teak wood duly fixed with steel lugs/ clamps wherever necessary.

Top made out of 20mm thick teak wood duly fixed with steel lugs/ clamps wherever necessary.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

CHAIR DINING (FD- 279/ FD-228) Removing the following unserviceable parts of chair Dining and supply and fix new parts duly french polished all replaced parts to match with existing parts all as shown in drawing and as specified and as directed:-

Teak wood Rear leg of size 55mm x 30mm x 890mm made to shape ncluding nylon buffers,

Teak wood Front leg of size 55mm x 30mm x 440mm made to shape including nylon buffers.

Teak wood front rail made out of 30mm x 65mm made to shape with holes at every 12.5 mm c/c in straight line.

Teak wood Side rail made out of 30mm x 65mm made to shape with holes at every 12.5 mm c/c in straight line.

Teak wood Rear rail made out of 30mm x 65mm made to shape with holes at every 12.5 mm c/c in straight line.

Teak wood Stiffeners of size 20mm x 25mm made to shape.

Teak wood Top back rest made to shape.

M & L for removing unserviceable and broken plastic cane and cleaning entire surface of the Chair Dining and recanning with new plastic cane of size 1.8x0.46mm and boarder with 3.0x0.60mm size cane as per Godrej Pattern complete all as specified and directed.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

CHAIR EASY (FD- 229) Removing the following unserviceable parts of Chair Easy and supply and fix new parts duly french polished to match with existing parts all as specified and as directed:-

Teak wood Rear leg of size 55mm x 25mm x 490mm made to shape including nylon buffers.

Teak wood Front leg of size 55mm x 25mm x 490mm made to shape including nylon buffers.

Teak wood front rail made out of 50mm x 25mm made to shape with holes at every 12.5 mm c/c in straight line.

Teak wood Side rail made out of 50mm x 25mm made to shape with holes at every 12.5 mm c/c in straight line.

Teak wood Rear rail made out of 50mm x 25mm made to shape with holes at every 12.5 mm c/c in straight line.

Teak wood arm rest out of 65mm x 25mm made to shape.

M & L for removing unserviceable and broken plastic cane and cleaning entire surface of the Chair Easy and recanning with new plastic cane of size 1.8x0.46mm and boarder with 3.0x0.60mm size cane as per Godrej Pattern complete all as specified and directed.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

CHAIR WRITING (FD-250/ 280) Removing the followng existing unserviceable parts of Chair Writing and supply and fix new parts duly french polished to match with existing parts all as specified, shown on drawings and as directed:-

Teak wood Rear leg of size 55mm x 30mm x 890mm made to shape including nylon buffers.

Teak wood Front leg of size 55mm x 30mm x 460mm made to shape including nylon buffers.

Teak wood front rail made out of 65mm x 30mm made to shape with holes at every cm in straight line.

Teak wood Side rail made out of 65mm x 30mm made to shape with holes at every cm in straight line.

Teak wood Rear rail made out of 65mm x 30mm made to shape with holes at every cm in straight line.

Teak wood Arm rest made to shape.

Teak wood Back rest of size made to shape.

Teak wood Stiffeners.

M & L for removing unserviceable and broken plastic cane and cleaning entire surface of the Chair writing and recanning with new plastic cane of size 1.8x0.46mm and boarder with 3.0x0.60mm size cane as per Godrej Pattern complete all as specified and directed.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

HAT STAND WITH MIRROR (FD-233) : Removing the following unserviceable parts of Hat stand and supply and fix new parts all as shown on drawing and as specified and directed. Hat stand will be polished with french polish to give a glossy appearance.

Supply and fix 5mm thick electro copper plated mirror of size 440 x 300mm.

Copper oxidised steel pegs of size 120 x 75 mm.

Supply and fix Key plate with screw for wall mounting of 25 mm x 40 mm.

Teak wood edging of size 6 x 35mm alround the plywood.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

PEG TABLE (FD-236 / 277) Removing the following unserviceable parts of Peg Table and supply and fix new parts duly french polished on replaced parts to match with existing parts all as specified, shown on drawings and as directed.

Table top of size 300mm x 450mm made out of pre-laminated particle board 18mm thick, exterior grade with approved shade on one side and other side balancing white duly provided with 4mm thick teak wood edging alround duly french polished complete all as specified and directed.

Teak wood long rail made to shape.

Teak wood short rail made to shape.

Teak wood legs of peg table made to shape including nylon buffers.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

SIDE BOARD (FD-241) Removing the following unserviceable parts of Side Board and supply and fix new parts all as specified, shown in drawing and as directed:-

Door shutter in two parts of size 655mm x 835mm made out of pre-laminated particle board 18mm thick, exterior grade with matching shade on both side of approved make duly fitted with Piano hinges, knobs 2 No., lock 01 No. and providing border with 4mm thick first class teak wood beading all around complete. Note:- Double leaf shutter shall be measured as one unit.

Side portion of pre-laminated particle board 18mm thick exterior grade with matching shade on both side of approved make on the other side.

Back side of 6mm commercial plywood all as shown in the drawing and as directed.

Bottom Frame made out of first class teak wood fitted with stiffeners and legs 4 Nos complete all as specified and directed.

Drawer made with 18 mm particle board exterior grade with matching shade on both side of approved make duly fitted with chromium plated knob complete.

Bottom and top made out of 18mm thick particle board exterior grade with matching shade on both side of approved make.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

STOOL DRESSING (FD-252/ FD-282) Removing the following unserviceable parts of Stool dressing and supply and fix new parts duly french polished on all replaced parts to match with existing all as shown in drawing and as specified and as directed:-

Teak wood long rail made to shape with holes at every 12.5 mm c/c in straight line.

Teak wood side rail made to shape with holes at every 12.5 mm c/c in straight line.

Teak wood legs with nylon buffers.

Teak wood stiffener.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

STOOL DRESSING WITH CUSHION SEAT (FD/E6/MAP/14) Removing the following unserviceable parts of Stool dressing and supply and fix new parts duly french polished on all replaced parts to match with existing parts all as shown in drawing and as specified and as directed:-

Teak wood legs both front & rear legs made to shape alongwith PVC bushes.

Teak wood long rail / side rail made to shape with cushion seat fitting provision as per the measurements shown in the drawing all as specified and as directed.

Teak wood Brackets / stiffener duly tightned by proper drilling with screws all as specified & as directed.

Foam cushion 75 mm thick 432 density seat duly stiched with cloth tepestry of approved colour and costing not less than Rs. 350/- per running meter with 12mm thick plywood BWR Grade for seat all specified and as directed.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

TABLE BED SIDE (FD-276) Removing the following unserviceable parts of Table Bed Side and supply and fix new parts duly polished on all replaced aprts to match with existing parts all as shown in drawings and as specified and as directed:-

Table top made out of pre-laminated particle board 18mm thick, exterior grade with approved shade on one side and other side balancing white duly provided with 4mm thick teak wood edging alround duly french polished complete all as specified and directed,

Side made out of pre-laminated particle board 18mm thick, exterior grade with approved shade on one side and other side balancing white duly provided with 4mm thick teak wood edging alround duly french polished complete all as specified and directed,

Back made out of 6mm thick commercial plywood.

Shelf made out of 12mm thick prelaminated particle board of size 450mm x 230mm with matching shade on one side and balancing white on the other side duly provided with 4mm thick teak wood edging complete.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

TABLE CENTRE (FD-235/ FD-274) Removing the following unserviceable parts of table centre and supply and fix new parts duly french polished on all replaced parts to match with existing parts all as specified, shown in drawings and as directed:-

Table top made out of pre-laminated particle board 18mm thick, exterior grade with approved shade on one side and other side balancing white duly provided with 4mm thick teak wood edging alround duly french polished complete all as specified and directed.

Teak wood legs duly grooved 5mm x 5mm provide MS clamp and nylon buffers of suitable sizes complete all as specified and directed.

Teak wood long rail of first class teak wood.

Stiffener made out of first class teak wood.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

TABLE COMPUTER (FD/E6/MAP/03) : Removing the following unserviceable parts of TABLE COMPUTER and supply and fix new parts duly french polished wherever required and all as shown on drawing and as specified and directed.

Top made of 18mm thick Pre Laminated Particle board exterior grade of matching approved shade with 4mm thick teak wood beading alround.

Bottom shelf made of 18mm thick Pre Laminated Particle board exterior grade of matching approved shade with 4mm thick teak wood beading alround.

Key board tray of size 450 mm x 480 mm made of 18mm thick Pre Laminated Particle board exterior grade of matching approved shade with 4mm thick teak wood beading alround.

Pull out tray (Mouse tray) made of 18mm thick Pre Laminated Particle board exterior grade of matching approved shade with 4mm thick teak wood beading alround.

Drawer 75mm deep made of 18mm thick Pre Laminated Particle board exterior grade of matching approved shade with 4mm thick teak wood beading alround with CP knob of approved shape.

Telescopic chanel for key board tray / pull out tray / drawer of suitable size as specified in drg.

MS Legs screw type with nylone buffers of suitable size as specified in drg.

Rectangular PVC cover size 25x50mm made to shape

TABLE DRESSING LADIES (FD-251) : Removing the following unserviceable parts of Table dressing ladies and supply and fix new parts all as shown on drawing and as specified and directed. Table Dressing Ladies will be polished with french polish to give a glossy appearance.

5mm thick electro copper plated mirror of size 1250 X 400mm Make of Mirror : ATUL / SWASTIK / MODIGUARD / SAINT GOBAIN

Sliding glass of size 280x260mm -2 Nos.duly groved and fixed on aluminium channel of suitable size as specified in drg. Note: 02 Nos. of glass pane shall be measured as a single unit.

Drawer made of 18mm thick Pre Laminated Particle board exterior grade of matching approved shade with 4mm thick teak wood beading on all exposed surfaces with 12mm thick teak wood plank on sides and rear with 6mm thick plywood bottom including provision of chromium plated knob .

Bottom made out of 18mm thick Particle board made of 18mm thick Pre Laminated Particle board exterior grade of matching approved shade with 4mm thick teak wood beading on all exposed surfaces of size 900x380mm .

Bottom frame made out of teak wood stiffner of size 40x25 alround along with 4 nos legs made out 45x45x150mm long with the bottom of 25x25x150mm with overall size 700x200mm .

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

TABLE DRESSING LADIES WITH STOOL DRESSING CUSHIONED SEAT (FD/MAP II/07) : Removing the following unserviceable parts of Table dressing ladies with cushioned seat and supply and fix new parts all as shown on drawing and as specified and directed.

5mm thick electro copper plated Looking mirror of exact frame fitting size as per the drawing. Make of Mirror : ATUL / SWASTIK / MODIGUARD / SAINT GOBAIN

Sides / Back portion made out of 18mm thick Particle board made of 18mm thick Pre Laminated Particle board exterior grade of matching approved shade with 4mm thick teak wood beading on all exposed surfaces all as specified and as directed.

Drawer made out of 18mm thick Particle board made of 18mm thick Pre Laminated Particle board exterior grade of matching approved shade with 4mm thick teak wood beading on all exposed surfaces with 12mm thick teak wood plank on sides and rear with 6mm thick plywood bottom including provision of chromium plated handles / as directed / approved .

Stool made out of 18mm prelaminated particle board natural teak shade & other side white with 12mm thick teak wood plank on sides and rear with 6mm thick plywood bottom fitted with RM 50 dia heavy duty revolving Nylon wheels with a provision to cushion seating as directed and chromium plated handle / as directed / approved .

Mirror Frame with 1st class hard teak wood free from knots & defects shaped to the frame with specified measurement as per the drawing. 12mm commercial plywood on the back of the mirror all as specified & as directed. Note : 04 Corners/pieces of base is considered as 01 frame

Foam cushion 75 mm thick 32 density seat duly stiched with cloth tepestry costing not less than Rs. 350/- per running meter of approved colour over lining cloth white colour all as specified and as directed.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

TABLE DRESSING GENTS (FD-230) Removing the following unserviceable parts of Table dressing gents and supply and fix new parts all as shown on drawing and as specified and directed. Table Dressing Gents will be polished with french polish to give a glossy appearance.

Top made out of 18mm thick pre-laminated particle board with natural teak veneer on one side and white shade on the other side measuring 900mm x 900mm provided with 4mm thick teak wood edging alround complete all as directed.

Teak wood legs of size 55mm x 35mm duly provide with MS clamp and nylon buffers of suitable size complete.

Teak wood top rails of size 25mm x 75mm.

M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance complete all as directed.

M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance complete all as directed.

TABLE WRITING (FD-249/ FD-275) Removing the following unserviceable parts and supply and fix new parts duly polished all replaced parts to match with existing parts all as shown in drawings and as specified and as directed:-

Top of size 1145x600 mm made out of 18mm thick Pre laminated Particle board exterior grade of matching approved shade with 4mm thick teak wood beading alround.

Drawer with sides made of 6mm thick plywood and bottom of 12mm thick teak wood plank including provision of one No. chromium plated knob complete.

Bottom shutter made out of 18mm prelaminated particle board exterior grade with 4mm thick teak wood edging alround including provision of one No. chromium plated knob/ handle complete all as specified and directed.

Stiffeners made out of First class teak wood.

Legs made out of first class teak wood duly grooved 5mm x 5mm and provide with MS clamp and nylon buffers of suitable sizes as approved complete.

Back of 6mm thick commercial ply.

Side made out of 18mm thick plywood one side teak veneered and other side commercial duly provided with 4mm thick teak wood beading alround complete.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

TABLE WITH DRAWER & TABLE WITHOUT DRAWER (900MM X 600MM X 760MM) FD-231/ FD-284) Removing the following unserviceable parts and supply and fix new parts duly polished all replaced parts to match with existing parts all as shown in drawings and as specified and as directed:-

Top made out of 18mm thick Prelaminated particle board exterior grade of approved matching shade both side laminated of size 900mm x 600mm.

Teak wood legs provide with MS clamp and nylon buffers of suitable size complete.

Teak wood long rail.

Teak wood short rail.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

TABLE DINING 6/8 PERSONS (1800MM X 900MM X 760MM/ 1500MM X 900MM X 760MM) FD-239/ FD-273) Removing the following unserviceable parts and supply and fix new parts duly polished all replaced parts to match with existing parts all as shown in drawings and as specified and as directed:-

Top made out of 18mm thick prelaminated particle board exterior grade both side laminated with approved matching shade of size 1800mm x 900mm duly provided with 4mm thick teak wood edging alround complete.

Top made out of 18mm thick prelaminated particle board exterior grade both side laminated with approved matching shade of size 1500mm x 900mm duly provided with 4mm thick teak wood edging alround complete.

Teak wood legs of size 75mm x 40mm including 4 Nos MS clamp and nylon buffers of suitable size complete.

Teak wood long rail of size 100mm x 25mm for table dining 8 persons.

Teak wood long rail of size 100mm x 25mm for table dining 6 persons.

Teak wood side rail of size 100mm x 25mm for table dining 8 persons/ 6 persons.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance of Table Dining 6 Persons all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance of Table Dining 8 Persons all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

TABLE (900MM X 900MM X 760MM) FD-291/ FD-382) Removing the following unserviceable parts of Table 900mm x 900mm x 760mm and supply and fix new parts duly polished all replaced parts to match with existing parts all as shown in drawings and as specified and as directed:-

Top made out of 18mm thick prelaminated particle board exterior grade both side laminated with approved matching shade of size 900mm x 900mm duly provided with 4mm thick teak wood edging alround complete.

Teak wood legs of size 55mm x 35mm duly provide with MS clamp and nylon buffers of suitable size complete.

Teak wood top rails of size 25mm x 75mm.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

TEAPOY (FD-232 / FD-278) Removing the following unserviceable parts of Teapoy and supply and fix new parts duly polished all replaced parts to match with existing parts all as shown in drawings and as specified and as directed:-

Top made out of 18mm thick prelaminated particle board exterior grade both side laminated with approved matching shade of size 600mm x 450mm duly provided with 4mm thick teak wood edging alround complete.

Teak wood long rail of size 50mm x 20mm.

Teak wood short rail of size 50mm x 20mm.

Teak wood stiffener of size 50mm x 20mm.

Teak wood legs of size 60mm x 30mm duly provide MS clamp and nylon buffers of suitable size as approved complete.

M&L preparation of the old surface by scrapping down and smoothening with sand paper and putty to get an even smooth finish and apply two coats of French polish to obtain GLOSSY FINISH appearance all as directed. Polishing works shall be carried out at BSO yard or md accns or unit lines under the AOR of GE Chennai.

Trolley for TV (FD/E6/MAP/04) : Removing the following unserviceable parts of TV Trolley and supply and fix new parts duly french polished on wooden portion all as shown on drawing and as specified and directed.

Top made out of 18mm thick prelaminated particle board exterior grade both side laminated with approved matching shade of size 600mm x 450mm duly provided with matching PVC edging alround complete.

Pull Out Tray made of 18mm thick Prelaminated particle board of matching shade, exterior grade with 1mm PVC edging all around fixed the tray on telescopic channel of suitable size.

Pull Out drawer made of 12mm thick Prelaminated particle board of existing shade, exterior grade with 1mm PVC edge banding all around fixed the tray on telescopic channel with CP handle 75mm long.

Openable glass shutter 5.5mm thick with glass hinges, magnetic catcher and CP handle 75mm.

RM 54 Dia heavy duty revolving Nylon wheel Swivial type / caster wheel as directed.

LEO ENTERPRISES

SIVA ENTERPRISES

SHANMUGA TRADERS