Welcome maint and periodical services and repair to Joinery plumbing and certain BR nature works at Md Accn or OTM Accn and outside area under GE Army Jaisalmer

Amount

Taking down of shutter in any descreption exc 1 sqm and not exc 2 sqm and re-fixing in the same opening

Dismantling, floor, hearth or wall tiling including cement morter bedding (but not backing), removing serviciable tiles to store and rubbish off the premises.

M&L for non skid ceramic Joint less (vertical joints) coloured tiles 10mm area of each tile exc 0.18sqm but not exc 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM 1:6 all as directed

M&L glazed colour ceramic tiles(joint less) in of size 350 x 250x 7mm /450X350X7mm thick as in dado including all round border tiles pattern and print as approved and width of border tiles not less then 75mm including screed bed or bedding layer 10mm thick in CM 1:4 all as specified.

M&L granite tile 20mm thick machine cutting including grinding and polishing and bulnoised to edges etc complete all as specified

S&F in repairs brass chromium plated concealed wall mixer 3-in-1 system with provision for both telephonic shower and overhead shower (300 x 300 mm) complete with 115mm bend pipe and wall flange. (Make:- Jaquar/ Parco Marc / ESSESS as approved by GE.

S&F bidet spray (health faucet) with flexible pipe length not less than 1 mtrs minimum fixed to EWC suitable for 15mm bore pipe complete all as specified and directed. (Make :- Jaquar (Cat Part No. ALD-CHR-573) or equivalent in Parko/Kohler/ESSCO.

S&F in repairs brass chromium plated centrer hole mixer of wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe. (Make :- Jaquar (Cat Part No. FUS-29001) or equivalent in Parko/Kohler/ESSCO.

S & F in repairs brass chromium plated concealed Angular stop cock with flange for 15mm bore GI tubing complete all as specified and directed. (Make :- Jaquar (Cat Part No. FUS-29227) or equivalent in Parko/Kohler/ESSCO.

S&F in repairs wash hand basin (1000 x 465 mm with built in counter snow white celene Cera Cat no S2030119 ) and HMR Board Cabinet complete ( 1005 X 455 x 600 mm Cera Cat no B 3010109 )wall hung including CP waist coupling but excluding taps, waist pipe, chain and plug and procelain stopper complete all as specified and directed.

S&F 12 mm thick toughened shower glass partition fixing to floor ,wall complete including openable door with hinges, handle, bolt etc asper requirment complete all as specified and directed.

S&F Looking Glass mirror (size 2000 x 1200 mm) 5 mm thick with anti crack film on back and pencil polished glass edges fixed on all with brackets all as specified and directed.

S & F in repair wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange (without hand & overhead shower). (Make :- Jaquar (Cat Part No. QQT-7281) or equivalent in Parko/Kohler.

S&Fin repairs PVC waste pipe 32mm dia 600mm long complete all as specified and directed.

S&F in repairs CP brass glass shelves 550mm long with brackets complete all as specified and directed.

S&F in repairs 15mm bore PVC connection 450mm long with brass coupling at both ends complete all as specified and directed.

S & F in repair for single towel rail 450mm long complete all as specified and directed. (Make :- Jaquar (Cat Part No. AQN-7711A) or equivalent in Parko/Kohler.

S&F in repairs CP brass soap dish fancy type complete all as specified and directed.

S&F in repairs wall hung EWCs with duroplast soft close seat cover including twin flush concealed cisterns (cera simp 550 x 95 x 500 mm cat no B1110108 or eqivilient)with frame and all fittings snow white(camel 555 x 370 x 365 mm cera cat no S1043128 p trap or eqivilant including connection to drain (or outgoing pipe) as directed by Engineer in Charge .

S&F in repairs one piece EWCs with duroplast soft close seat cover and twin flush fittings snow white( crusiser 710 x390 x 790 mm cera cat no S1013137 or eqivilant including connection to drain (or outgoing pipe) as directed by Engineer in Charge .

S&F in repairs cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls of 100mm dia.

All as per sl item No 21 above but 75mm dia of pipe.

S&F in repairs cast iron bends (any radius), diminishing pieces or tapers (Larger bore measured) of 100mm dia.

All as per sl item No 23 above but 75mm dia of pipe.

S&F in repairs 100 mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) with oval access door complete all as specified and directed.

S&F in repairs 75mm dia CI cowls all as specified and directed.

S&F in repairs 75 mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) with oval access door complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store complete of 15mm bore pipe all as specified and directed.

All as per item No 28 above but 20mm bore of pipe.

S&F GI tubing medium grade 15mm bore complete all as specified and directed.

S & F 20mm bore GI tubing medium grade fixed complete to walls and ceiling or laid in floor complete all as specified and directed..

Cutting chases, pinning in , making good to facings for concealed water tubing and pointing in CM 1:3, cutting not exc 10 cm girth.

S&F in repairs PVC (SWR) floor trap75mm, with grating including jointing with solvent cement complete all as specified and directed..

S&F factory made sloid PVC core plastic ply 18mm thick with plain colour laminated PVC sheet on both face fixed in repair complete all as specified & directed by Engineer-in-charge. (Make-: Rajshri/Sintex).

M&L for boarding, supplied & fixed with screws in any situation (except flooring and skirting) planed one side and edges tongued and grooved or rebated fixed in shelves, partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work including polishing painting complete all as specified & directed by Engineer-in-charge.

S&F SS handles 100mm long complete all as specified & directed by Engineer-in-charge.

S&F SS tower bolt 75 mm long complete all as specified & directed by Engineer-in-charge.

S&F locks, cupboard grade-I, sized 75 mm brass 4 layers complete all as specified & directed by Engineer-in-charge.

S&F Plain fillets square, rectangulare or trangular in section clean swan of 2nd class HW sectional area exc 3 & not exc 6 sqcm

S&F megnatic catch for cup board shutter complete all as specified & directed by Engineer-in-charge.

S&F, parliament hinges cast brass bright polished complete all as specified & directed by Engineer-in-charge.

S&F auto hinges steel for sliding shutter complete all as specified & directed by Engineer-in-charge.

S&F extruded brass handle fabricated type polished complete all as specified & directed by Engineer-in-charge.

S&F, 40mm dia, brass, polished cupboard knobs fixed with nut, screw and washer of brass complete all as specified & directed by Engineer-in-charge.

M & L preparation of newly wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of pink/white primer all as specified and directed.

M & L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

Demolition of brick/stone masonery built in cm incl all quins arches, pillars etc complete.

M&L Walling of random rubble stone masonry built in cement mortar 1:6 uncoused, well bonded, bedded and surface in contact with earth in the same mortar in contact with earth in the same mortar as the work proceeds complete, all as specified and directed.

Dismantling wrought iron or mild steel work of any description not othervise provided for

S&F MS frame work such as grills, gratings, etc.. With ends of bars shouldered and /or riveted , or forged into spikes ; framed guard bars, barred iron doors ladders framed balusteers, walk ways, railings framework of water tanks and similar work conforming Fe.290 Gde -E-165 all as specified and directed by Engineer in charge.

Dismantling boarding any description, fixed in any position with screw

M&L prelaminated particle board 19mm thick, interior garde, prelaminatedone side with decorative choice lamination & other side blancing white lamination, ixed with screws to timnber frame work complete all as directed by Engr-in-Charge.

S&F countiniuos (peiano) hinges of flap width 19mm , mild steel, bright finish or electogalvanised complete all as directed by Engineer-in-Charge.

M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engr-in-charge

Dismantling Asbestos cement corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed by Engr-In-charge

M&L Prepainted galvanume aluminium zine coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws complete all as specified

Taking down anodised aluminium frame & shutter for door, window and ventilator complete all as specified and directed by Engineer-in-charge.

S&F, anodised aluminium frame & shutter for door, window and ventilator including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, hinges, tower bolt, etc complete all as specified & directed by Engineer-in-charge. (Note :- Floor door spring & sheet glass shall be measured and paid seperately).

S&F steel rolling shutters of 1.25 mm thickness laths without ball bearing (push pull or manual type) as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position all as directed by Engineer-in-charge.

All as per item No. 59.00 above but gear operated type with bevel gear box and crank handle.

Taking down unserviceable rolling shutter of any description any size height upto 4 mtrs complete all as specified and directed by Engineer-in-charge.

Taking down unserviceable rolling shutter of any description any size height more than 4 mtrs complete all as specified and directed by Engineer-in-charge.

S&F Steel lock with two keys as per Godrej pattern complete all as specified & directed by Engineer-in-charge.

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness below or above ground level etc all as specified and as directed.

M&L for 75mm thk cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing as specified

M&L for Machine pressed precast concrete rubber moulded interlocking paver block any shape and size conforming to IS-15658: 2006 of 60 mm thickness of grade M-35 with grey cement and no pigment.

M&L for even spreading of 25 mm thick layer of sand cushioning all as specified & directed by Eng-in- Charge.

M&L for preparation of old decorated existing surfaces including cornices, plasterd or un plasterd surfaces by brooming down or steel wire brushing moulds, moss efflorescent salt and trading oil and gresy spots and applying one coat of white wash on wall complete all as specified and directed by Eng-in-charge.

M&L for preparation of old decorated existing surfaces including cornices, plasterd or un plasterd surfaces by brooming down or steel wire brushing moulds, moss efflorescent salt and trading oil and gresy spots and applying one coat of white wash on ceiling complete all as specified and directed by Eng-in-charge.

M&L for washing/rubbing down and stopping of destempered, plastered and painted surfaces of wall/ceiling including cornices etc and making good of holes by filling holes in plastered surfaaces with POP mixed with distemper and applying one coat of distemper oil emulsion complete all as specified and as directed by Eng-in-Charge.

M&L for applying two coat of distemper oil emulsion over a coat of primer over putty surface complete all as specified and as directed by Eng-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10 cm width girth and applying one coat of synthetic enamel paint all as directed by Eng-in-Charge.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width girth and applying one coat of synthetic enamel paint all as directed by Eng-in-Charge.

M&L for washing/rubbing down and stopping of destempered, plastered and painted surfaces of wall/ceiling including cornices etc and making good of holes by filling holes in plastered surfaaces with POP mixed with distemper and applying one coat of cement base paint complete all as specified and as directed by Eng-in-Charge.

GEMRARAMCONTRACTOR

M/s Shree Construction Company

JAI ENGINEERING COMPANY