Sivalarkulam BMC construction

Amount

Clearing away the Jungles

Earth work narrow excavation for foundation in all soils and sub soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring, shuttering and baling out water where ever necessary, refilling the sides of foundations with excabvated earth in layers of not more than 15cm thk watered, well rammed , consolidated and depositing the surplus earth on bank with initial lead of 10m and initial lift of 2m, clearing and leveling the site etc., complete as directed by the federation officers and as per standard specifications.

Supplying and Filling with Stone dust in Layers of not more than 10cm thick to required thickness and watered well rammed and consolidated etc, complete as per standard specifications.

Cement Concrete 1:5:10 (One Cement, five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Supplying and filling with conveyed Gravel from approved source of supply with a lead of 0 to 50km for foundation and basement to required thickness and watered ,well rammed and consolidated etc., complete as directed by the Federation officers and as per the technical Specifications.

Supplying, erecting steel centering using M.S. Sheet of Size 90 x 60 cm and BG 10 Gauge stiffened welded with M.S. Anagle of Size 25 x 25 x 3 mm laid over Siler oak / Country wood joist of size 10 x 6.5 cm spaced at about 9 cm center to center and supported by casurina props of 10 to 13 cm dia spaced at 75 cm center to center for all type of RCC roof slab, Lintel beam, "T", "L" Beam, Landing slab, Plinth beam, Grade beam, Column footing, column, Sunshade, facia, sloped roof, waist slab etc., including necessary supports with all cross bracings, filling slits and holes in the surface ( The retrived materials should be taken back by the contractors ) and side shuttering etc., complete as directed by the federation officers and as per standard specification..

Upto Basement - Plain surface

Upto Basement - Column surface

0 to 3.30 m Column Surface

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Reinforced Cement Concrete 1:2:4 (One Cement,two sand and four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Upto Basement

Above Basement in GF upto 4.50 m height

Brick work in following Cement Mortar 1:5 using best quality of second class Table moulded bricks of size 9" x 4 3/8" x 2 3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Upto Basement

Above Basement in GF upto 4.50 m height

Plastering with cement mortar (1:3) 12mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications.

Plastering with cement mortar (1:5) 12mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications.

supplying and fixing following PVC pipes including material, labour etc complete as per standard specifications.

110mm PVC Pipe - 4 Kg/sq.cm

Supply and fixing of cuddapah slab with one side finishing etc complete.

Supply & fixing of steel rolling shutter ( Pull and push type with ISI monogram ) of approved quality with MS laths 75mm wide and 18 gauge thick to different sizes including all accessories like sliding grooves, shafts, spring, bearings, hood & locking arrangements and grouting the sides & top assembly with walls & beams, one coat of red oxide primer etc., complete as directed by the federation officers. and as per standard specifications

Supplying and fixing of 0.47 mm thick Galvalume roof sheet over the existing truss and purlins fabricated including necessary bolts and screws etc, complete

Supply & painting two coats of plastic emulsion of approved quality over plastered wall surface and ceiling, cost including cleaning the surface, scaffolding, curing etc., complete as directed by the federation officers. and as per standard specifications

supplying & fabricating and placing in position M.S angles, channels and Grill work for all type of steel structures including one coat red oxide primer and enamel painting etc complete

supplying and painting with two coats of synthetic enamel paint over one coat of red oxide

Supplying and laying of Flooring stone (SS size not less than 10cm thick) for unloading dock and can reception area with base mortar of 1:3, 20mm thick including cost and conveyance of all charges etc, completed.

Supplying and laying of sahabad Flooring stone for milk silo area with base mortar of 1:3, 20mm thick including cost and conveyance of all charges etc, completed.

GST Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.