CONSTRUCTION OF MID DAY MEAL KITCHEN, TOILET FOR GIRLS, TOILET FOR BOYS AND OTHER SEVER AND WATER PIPES REPAIR AT GOVERNMENT GIRL MIDDLE SCHOOL BASTI DANISHMANDA JALANDHAR (UNDER RANGLA PUNJAB SCHEME)

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority :- EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD B&R JALANDHAR

Name of Work :- DNIT FOR CONSTRUCTION OF MID DAY MEAL KICHEN, TOILET FOR GIRLS, TOILET FOR BOYS AND OTHER SEVER AND WATER PIPES REPAIR AT GOVERNMENT GIRLS MIDDLE SCHOOL BASTI DANISHMANDA JALANDHAR (UNDER RANGLA PUNJAB SCHEME)

Contract No: Civil Works

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Work Name Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

2 Dismantling of pre-stressed / RCC including T&P scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material. & staking the serviceable material with all lifts & lead of 100mtr (By Mechanical Means) 3 Cum Excess(+) Full Conversion INR

3 Dismantling brick work tile, masonry or tile lining (b) In cement 4 Cum Excess(+) Full Conversion INR

4 Cridit of Old Brick 5 Each Excess(+) Full Conversion INR

5 Cridit of Old Brick Bats 6 0.000 Cum Excess(+) Full Conversion INR

6 Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base. 7 Sqm Excess(+) Full Conversion INR

7 Disposal of Malba outside the premises loading/unloading including all leads as desired by Engineer-in-charge 8 Cum Excess(+) Full Conversion INR

8 Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. 9 Cum Excess(+) Full Conversion INR

9 Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type 10 Cum Excess(+) Full Conversion INR

10 Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. 11 Cum Excess(+) Full Conversion INR

11 Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. 12 Cum Excess(+) Full Conversion INR

12 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 13 0.999 Qtl Excess(+) Full Conversion INR

13 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering ) 14 Sqm Excess(+) Full Conversion INR

14 Centering and shuttering for columns (Square or ractangular or poly gonal in plain) 15 Sqm Excess(+) Full Conversion INR

15 Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. 16 Sqm Excess(+) Full Conversion INR

16 Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. 17 Sqm Excess(+) Full Conversion INR

17 First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth 18 Cum Excess(+) Full Conversion INR

18 First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level 19 Cum Excess(+) Full Conversion INR

19 115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure 20 Sqm Excess(+) Full Conversion INR

20 12.5 mm thick cement plaster 1:5 21 Sqm Excess(+) Full Conversion INR

21 20mm thick cement plaster 1:5 in two coat work 22 Sqm Excess(+) Full Conversion INR

22 Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after ire brushing 23 Sqm Excess(+) Full Conversion INR

23 Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified 24 Rmt Excess(+) Full Conversion INR

24 Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 25 Each Excess(+) Full Conversion INR

25 Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge 26 Rmt Excess(+) Full Conversion INR

26 Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. 27 Each Excess(+) Full Conversion INR

27 Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge 28 Each Excess(+) Full Conversion INR

28 Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers including ramming, watering and consolidated lead upto 1000 metres 29 Cum Excess(+) Full Conversion INR

29 Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres 30 Cum Excess(+) Full Conversion INR

30 Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material 31 Sqm Excess(+) Full Conversion INR

31 Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. a Size 600x600 mm 32 Sqm Excess(+) Full Conversion INR

32 Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. a Size 600x600 mm. 33 Sqm Excess(+) Full Conversion INR

33 Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete (c) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter 34 Metre Excess(+) Full Conversion INR

34 Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flash-welded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items) 35 Kg Excess(+) Full Conversion INR

35 Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position 36 Qtl. Excess(+) Full Conversion INR

36 Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area 37 Sqm Excess(+) Full Conversion INR

37 Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1 (1999): (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick 38 Sqm Excess(+) Full Conversion INR

38 Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects 39 Sqm Excess(+) Full Conversion INR

39 Providing & Fixing decorative laminated sheet 0.72mm thick and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 40 Sqm Excess(+) Full Conversion INR

40 Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) I) For shutter area above 0.50 sqm 41 Sqm Excess(+) Full Conversion INR

41 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 42 Sqm Excess(+) Full Conversion INR

42 Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) 43 Sqm Excess(+) Full Conversion INR

43 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 44 Sqm Excess(+) Full Conversion INR

44 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade 45 Sqm Excess(+) Full Conversion INR

45 RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- 46

46 a i) Wiring fan point (Without fan box) 47 Each Excess(+) Full Conversion INR

47 ii) Wiring light point 48 Each Excess(+) Full Conversion INR

48 iv) Wiring 6Amp. wall socket point 49 Each Excess(+) Full Conversion INR

49 PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 50

50 (ii) Overall size 1.5sq.mm (Un-sheathed) 51 Mtr Excess(+) Full Conversion INR

51 (iv) Overall size 4sq.mm (Un-sheathed) 52 Mtr Excess(+) Full Conversion INR

52 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (i) Heavy Gauge PVC Conduit Pipe 20mm dia. (On Surface) 53 Mtr Excess(+) Full Conversion INR

53 Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory 54 Each Excess(+) Full Conversion INR

54 Supply and erection of 3-Star rating AC Ceiling Fan 1200mm (48") suitable for 230 V single phase with double ball bearing, copper wound, full aluminium body, 3Nos. of blades, white in colour. The mounting type is down rod mount. The product should possess a minimum air deleivery of 218 CMM. The rated speed of the the product must be minimum of 350 revolutions per minute and 5Nos. of speeds. The approximate weight of the product should be 4Kg and 180gms.(without packing) or higher. The product should have a manufcaturer's guarantee/warranty of minimum 2 years. The product should be complete in all aspects with fan motor, bladeset, down rod, conopy set, shackle kit, twisted wire etc., including erection & testing of ceiling fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75 sq. mm complete in all respects as per satisfcation of the Engineer in charge at site. 55 Each Excess(+) Full Conversion INR

55 PUBLIC HEALTH 56

56 Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked,PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge 57 Each Excess(+) Full Conversion INR

57 Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. 58 Each Excess(+) Full Conversion INR

58 Providing and fixing Stainless steel health faucet complete in all respect. 59 Each Excess(+) Full Conversion INR

59 Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect Size 630 mm x 450 mm x 830 mm 60 Each Excess(+) Full Conversion INR

60 Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. I) Vitreous chinaware standard white pedestal for wash hand basin. 61 Each Excess(+) Full Conversion INR

61 Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge) 62 Each Excess(+) Full Conversion INR

62 Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect. 63 Each Excess(+) Full Conversion INR

63 Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. A) C.P. brass towel Rails size 15mm dia 610mm long 64 Each Excess(+) Full Conversion INR

64 Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in allrespect 65 Each Excess(+) Full Conversion INR

65 Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) A) Size 600mmx450mm 66 Each Excess(+) Full Conversion INR

66 Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect 67

67 I) C.P. brass Bib cock long nose/ long body foam flow without flange 68 Each Excess(+) Full Conversion INR

68 II) C.P. brass Bib cock foam flow without flange 69 2 Each Excess(+) Full Conversion INR

69 Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect B) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut 70 Each Excess(+) Full Conversion INR

70 Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. 71 Each Excess(+) Full Conversion INR

71 Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect 72

72 B) C.P.brass 15mm Concealed stop cock with flange. 73 Each Excess(+) Full Conversion INR

73 C) C.P.brass 15mm Angle valve without flange 74 Each Excess(+) Full Conversion INR

74 Providing and fixing in position automatic brass Ball Cock intanks. ii)20mm i/d 75 Each Excess(+) Full Conversion INR

75 Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. 76 Each Excess(+) Full Conversion INR

76 Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. i) C.P. Brass extension piece, 25mm long to 50mm long 77 Each Excess(+) Full Conversion INR

77 CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. 78

78 b) c CPVC SDR 11 Pipe & fitting 20mmo/d 79 Mtr Excess(+) Full Conversion INR

79 c) c CPVC SDR 11 Pipe & fitting 25mmo/d 80 Mtr Excess(+) Full Conversion INR

80 d) c CPVC SDR 11 Pipe & fitting 32mmo/d 81 Mtr Excess(+) Full Conversion INR

81 e) cCPVC SDR 11 Pipe & Fitting 40 mm o/d 82 Mtr Excess(+) Full Conversion INR

82 Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. B) Size 150 mm x 150 mm 83 Mtr Excess(+) Full Conversion INR

83 Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. 84

84 A) Through wall 11.43 cm thick 85 Each Excess(+) Full Conversion INR

85 B) Through wall 22.86 cm thick 86 Each Excess(+) Full Conversion INR

86 Cement concrete plain1:2:4 mix with stone ballast mixing by manual means mixing by manual means 87 Cum Excess(+) Full Conversion INR

87 Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonagepipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B b) 110mm o/d SWR UPVC pipe lines laid complete 88 Mtr Excess(+) Full Conversion INR

88 Providing and fixing in position SS Gratingwith frame of approved make (to the approval of engineer in charge) complete in all respects 89 Each Excess(+) Full Conversion INR

89 Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm o/d pipes 90

90 ii) Single Tee With Door 91 Each Excess(+) Full Conversion INR

91 iii) Single Tee 92 Each Excess(+) Full Conversion INR

92 iv) Door Elbow 90 Degree 93 Each Excess(+) Full Conversion INR

93 vi) Vent Cowls 94 Each Excess(+) Full Conversion INR

94 vii) Reducer 110mm x 75mm 95 Each Excess(+) Full Conversion INR

95 ix) P Trap/Floor Trap 110mm x 110mm 96 Each Excess(+) Full Conversion INR

96 xi) Single Y-Junction 97 Each Excess(+) Full Conversion INR

97 Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 98 Sqm Excess(+) Full Conversion INR

98 Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material 99 Sqm Excess(+) Full Conversion INR

99 Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. 100 Sqm Excess(+) Full Conversion INR

100 By Manual Means (A) Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal. 101 Cum Excess(+) Full Conversion INR

101 (i) Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone boulders, Kankar and building rubbish, Earth. 0-6.0 km 102 Cum Excess(+) Full Conversion INR

102 Cement concrete 1:2:4 With stone ballast or shingle mixing by manual means 103 Cum Excess(+) Full Conversion INR

103 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made withm40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes,M.S. tube challies, M.S.clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. 104 Sqm Excess(+) Full Conversion INR

104 Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement,R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design. C) 600mm x 900mm inside with 455mm x 455mm cover and frame light duty double seal 105 Nos Excess(+) Full Conversion INR

105 Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. B) 100mm internal Diametre H.C.I. gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm 106 Nos Excess(+) Full Conversion INR

106 Providing&placing inpositionon terrace (at all floor levels)HDPEwater storage tanksof approvedmake(totheapprovalofEngineer in-charge) with cover with suitable locking arrangement andmakingnecessaryholes for inlet, outlet and over flo pipes but without fittings and base support for tank. I) Triple Layer Tanks 107 500 ltr Excess(+) Full Conversion INR

107 Excavation in trenches with straight or open cutting in streets, lanes or in open areas for intramural sullage drains, intramural intercepting drains and outfall drains storm water channels and other work contingent or incident thereto, by mecanical means (JCB or Hydraulic excavator) including manually dressing of bed, trimming of sides and sides slopes to full dimensions and depth as shown on the drawings or as shall be required by Engineer-in-charge including dressing to correct sections and dimensions according to templates and levels, dewatering of rain water, diversion of traffic, providing and fixing and maintenance of caution boards, fencing, night signals, watching etc. subsequent refilling , watering and dressing upto ground level for lead upto 15 m and for all lifts including disposing surplus soils up to 15 metre complete in all respects. 108 9.54 Cum Excess(+) Full Conversion INR

108 Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. C) 160mm o/d pipe 109 14 mtr Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information