REPAIR TO ROOF CEILING AND REPAIR TO KITCHEN TOILET AND BATHROOM FLOOR AND WALL TILING SANITARY FITTINGS AND GI TUBING AT B AND C COLONY RAMNAGAR AREA AND SURAKSHA AWAS AND COLONEL POINT AND HEMRL UNDER GERD PASHAN

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, Complete all as specified and as directed by Engineer-in-Charge.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and jointed in cement mortar Complete all as specified and as directed by Engineer-in-Charge.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 25mm thick Cement concrete 1:2:4 type B-1,( using 20mm graded crushed stone aggregate) as in sub base of flooring, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for coloured Non Skid ceramic tiles 7 mm to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 6, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Light coloured Glazed ceramic tiles in vertical surface as in skirting or dado 300 mm x 450 mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10 mm thick in cement mortar 1 :3 as backing coat, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for double charge Vitrified ceramic tiles 08 to 09 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1 : 4, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for double charge Vitrified ceramic tiles 08 to 09 mm thick (square/rectangular) as in skirtings, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering 10 mm thick in cement mortar 1 :3 as backing coat, Complete all as specified and as directed by Engineer-in-Charge. Note : Size of tiles as directed by Engr-in-Charge

Material and labour for 20mm thick granite (of any type) work (Table rubbed and polished) in steps, jambs, pillars, windows cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite, laid over and including 15 mm thick screed bed in (4:6) Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Drilling holes on granite, cudappa or trap stone for bolts. Pipes, etc. n.exc 25 mm dia, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Machine cut cudappa stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 15 mm thick screed bed in CM (1:6) Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 20mm thick Granite (of any type) tiles machine cut in skirting/dado laid over and including 10 mm thick rendering in CM 1:3 jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing, Complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete above ground floors exc 15cm thickness as in sunken floors or in similar works, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for water proofing treatment to sunken floor by applying (a)15mm thick plaster in cement mortar 1:4 with WPC (b) application of cement slurry mixed with and including acrylic based polymer modified cementitious composite compound coating in two layers as per direction of Engineer inCharge. (C) Over and above and including 200 micron thick polymer film should be pasted with the help of adhesive after treatment, Complete all as specified and as directed by Engineer-in-Charge. Note: (i) Make :- Dr Fixit, Asian paints, Fosroc and M/S Sikka. (ii) The work shall be executed only through authorised applicator of manufacturer.

Material and labour for Cement concrete in foundations, filling and mass-concrete, 1:5:10 Type E2 (Using 40mm Graded crushed stone agrregate as in sunken floors, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 40mm thick Cement concrete 1:2:4 Type B1 (using 20mm graded crushed stone aggregate) as in floor, Complete all as specified and as directed by Engineer-in-Charge.

supply and fix 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Vitreous China wash basin, white, flat back, size 550mmx400mm excluding taps, waste chain and plug and porcelain stopper fixing on existing brackets, including supply and fixing of flexible waste outlet pipe of 32 mm dia of required length, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight 45gms, suitable for vitreous china wash basin, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Swan Neck fancy type 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Min wt 15mm bore- 675 grams), Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 10Litres capacity low level PVC flushing cistern valveless, syphonic action type, , white, with inlet, ball valve, float and handle including brackets, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Vitreous China squatting pan, `Orissa' pattern, size 580 mm x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair 15mm bore Fancy type long body chromium plated Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule (minimum weight 550 grams), Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 15mm bore chromium plated Angle cock, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions (minimum weight 400 grams), Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, including PTMT waste coupling (half or full treaded) (Min wt 40mm bore - 60 grams) and PVC waste pipe 32 mm dia, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs soap dish, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with and including chromium plated bracket guard and railing 60cm long, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs swivel shower chromium plated with shower arm 15 mm size, 195 mm long with bend of 45º with flange fixed to 15 mm dia GI tubing, shower roses with or without swivel joints,125mm size, including fixing to steel pipe or union, Complete all as specified and as directed by Engineer-in-Charge.

Taking out old chocked 20 mm bore GI pipe and connections, including cleaning for refixing or removal to store from trenches, walls, ceilings, floors etc :-

All as per item No.33 above but 15 mm bore

Supply and fix 20 mm bore GI tubing medium grade with and including necessary fittings complete to walls and ceilings or laid in floors Complete all as specified and as directed by Engineer-in-Charge.

All as per item No.35 above but 15 mm bore

Material and labour for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth as in stone / concrete block walls, Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm² fixed complete to walls, ceilings or in floors etc, including all pipe fittings, Complete all as specified and as directed by Engineer-in-Charge.

Taking down existing chowkats or frames (without taking of shutters from the frame) exceeding 1.5sqm but not exceeding 4 sqm, Complete all as specified and as directed by Engineer-in-Charge.

Taking down shutter of size exceeding 1 Sqm but not exceeding 2 Sqm each, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix factory made Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix extruded aluminium alloy handles, fabricated type anodised 125 mm size, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 125 mm long aluminium anodised barrel tower bolts of extruded section, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 100 mm long MS butt hinges medium weight cold rolled welded to steel frame / fixed to wooden and PVC frame with suitable screws, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 20mm bore stainless steel Gde 304 curtain rods approved by GE, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs stainless steel fancy type brackets suitable for 20 mm dia curtain rods approved by GE, Complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in cement mortar 1:6, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Rendering on ceiling, 5mm thick on fair faces of concrete surfaces in cement nmortar 1:3, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered ceiling surface and applying three coats of white wash, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper over and including a coat of 1mm thcik interior wall care putty and including a coat of primer, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Complete removal of old treatment, preparation and applying two coats oil bound distemper over and including a coat of 1mm thcik interior wall care putty and including a coat of primer, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Aluminium powder coated sliding windows three track consists of 03 Nos of shutters i.e 02 Nos of Glazed shutters and 01 No of gauzed shutter with size of sections of styles and rails complete all as specified and directed by Engineer-in-Chharge Note : (i) All aluminium section including galzing clips, snap beading, joining cleats, rubber packing screws etc as required are deemed to be including in the rate quoted. (ii) Thickness of powder coating minimum 50 micron. (iii) Glass & wire cloth shall be measured and paid separetely under respective items.

supply and fix in repairs Aluminium powder coated ventilators partly fixed and partly louvered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/metre) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/metre), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/metre) including 5 mm thick pin headed figured glass louvers with and including blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with and including minimum 6 Nos of suitable size galvanised screws with PVC plug etc, Complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing Roof treatment in any layers including demolition of PCC in roofs unreinforced and disposal of debris to distance exc 250 metre and not exc 500 metre out of MoD land complete all as specified and directed. Note: i) The rates are inclusive of removal for any type old water proofing treatment over to Main RCC slab. ii) All the dismantled debris are required to be removed from HEMRL premises right after demolition so that process of user should not get obstructed.

Material and labour for PCC 1:2:4 (Type B0 using 12.5 mm graded crushed stone aggregate) (40mm thick avg) as in levelling course to match the undulations of roof and in coving, roof kerbs including benching etc including necessary formwork and finished rough surface complete all as specified and directed.

Material and labour for PCC 1:2:4 type B1 (using 20 mm graded aggregate) as in benching,coping, including weathering slightly rounded or chamfered angles and throating as directed including necessary use and waste of form work complete all as specified and directed.

Material and labour for rendering 10 mm thick in cement mortar 1:3 mixed with liquid water proofing compound (ISI marked) of approved make as per manufacturer's instructions over RCC roof slab and finished fair and even without using extra cement complete all as specified and directed.(Liquid water proofing compound shall be measured and paid seperately as 'Supply only'.)

Material and labour for mechanical cleaning of surface to make it free from any bituminous residue/ dirt, oil , greece or similar material, crack treatment by cutting open cracks and cleaning & filled with sealent including application of Pu based primer complete all as specified and directed by Garrison Engineer/Engr-in-Charge.

Material and labour for applying water based polyurethane modified dispersion (single component, cold applied, non toxic, VOC complaint) in 03 coats including 01 coat of epoxy primer @ .15 Kg per Square Metre followed by two coats of polyurethane coating with 1.5 Kg per Square Metre in two coats etc complete as per manufacturer specification and complete all as specified and directed by Garrison Engineer/Engr-in-Charge. Notes : For sr item no 61 & 62 1. Properties of Polyurethane based chemical shall confirm to following Technical ParaMetres:- (i) Highly Elastic and shall have crack bridging ability of upto 3mm as per AS NZ 4548 (ii) UV Resistance. (iii) Adhesion to concrete and shall resist 7 bars of hydrostatic pressure. (iv) Tensile strength should not less than 2.0 N/sq.mm for free film & 60 % solid content as per ASTM C 1250 (v) Elongation should not less than 300% as per ASTM D2370 (vi) Solid content by weight should not less than 60%. (vii) Air/water permeability BSEN 12390 AT 5 bar -72 hours should be NIL and minimum dry film thickness of water proofing membrane must be 1.0mm. (viii) Accelerated weathering (ASTM453) should Pass 1000 hours. (ix) Reaction to fire – non inflammable. 2. The work shall be executed through authorised applicator of manufacturer only. Contarctor has to provide manufacturer test certificates for the above mentioned technical paraMetres and PVs 3. The conractor has to submit the guarntee for 10 Years against the water proofing treatment. Make:- Bostic, Berger,Fosroc, sika, Asian

Disconnecting existing water tanks of capacity exc. 250 ltr and n. exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified & as directed.

Disconnecting existing tanks of capacity exc.500 ltr and n. exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes,PVC (SWR) pipes ( any size or pattern ) including all fittings heads ,shoes, bends, and removal to storecomplete all as specified and directed.

supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary scaffolding upto the height of building from ground level complete all as specified and directed.

supply and fix 110 mm dia PVC (SWR) bend with acess door complete all as specified and directed.

Material and labour for Hardcore of gauge n exc 63 mm deposited spread and levelled in two layers n exc 15 cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and directed.

Excavation in trenches; not exc 1.50 m depth & n. exc1.50m wide for foundation & getting out in soft/loose of soil complete all as specified and directed.

Returning filling including spreading, leveling watering & Well ramming in layers n.exc 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material in soft/loose soil exc 250m & not exc 500m and depositing where directed at a level n. exc 1.50m above starting point complete all as specified and directed.

Material and labour for PCC (1:4:8) type C-2 using 40 mm graded stone agg as in fdn filling/mass concrete complete all as specified and directed.

Material and labour for Applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Square Metre over the old membrane and finally applying two coats of aluminium paint @ 0.10 ltrs/Square Metre complete all as specified and directed by Engineer In Charge.

Material and labour for dismantling and taking out existing strip type lightening arrestor and refixing the same in position with fixtures and fittings and making good disturbed portion on roof surfaces complete all as specified and directed.

Material and labour for PCC 100 mm thick Type D2 1:4:8 cement concrete (using 40mm graded stone aggregate) as in sub base or in levelling course complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-45 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of M-sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

supply and fix precast cement concrete kerb blocks of any size, shape and finished using white cement and pigment of any colour grade M-30, set and jointed in CM 1:4 to match. Note: Kerb stone shall be laid in two colours of alternative complete all as specified and directed.

Material and labour for factory made precast chequered cement concrete tiles, size 30cmx30cmx22 to 25mm, hydraulically pressed, different colours, glossy finished, set jointed in neat cement slurry and pointed with white cement and coloured pigment to match the surface including 20mm thick screed bed, in CM (1:6) , complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for cement concrete type B -1, 1:2:4 (20mm graded aggregate) 100 mm thick as in hardstandingcomplete all as specified and directed.

Material and labour for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' thickness of slab 100mm complete all as specified and directed.

Material and labour for 25mm thick cement concrete flooring type B0, 1:2:4 (using 12.5 mm graded aggregate) finished even and fair complete all as specified and directed.

Demolition of brick work/stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks, complete all as specified and directed.

Material and labour for Precast cement concrete block masonry exceeding 10 cm in width with solid block of PCC(1:3:6) type C1 and setting in CM 1:6 complete all as specified and directed.

Dismantling of wrought iron and steel work of any description and in any position as in gate and grills complete all as specified and directed.

Supply and Fix in repair Rolled Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other coveringin Fe 410-W (Gde- E- 250) quality-A . Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintle hinge or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; incl errection and fabrication also fastening and fixing complete all as specified and directed.

Material and labour for Rendering 15mm thick in two layers on fair faces of brick work or concrete surfaces 10mm in CM 1:6 and top layer 5 mm thick in CM 1:4 complete all as specified and directed.

Material and labour for preparation of newly plastered wall surface and applying two coats of acrylic weather proof exterior emulsion paint over and including exterior primer on wall complete all as specified and directed

Material and labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed drought up to course complete all as specified and directed.

Material and labour for walling of random rubble, brought upto course, well bonded, bedded and solidly hearted, built in CM (1:6) but except stone incl removing mortar and cleaning the stone, stacking for measurement and removal and disposing of debris etc complete all as specified and directed.

Material and labour for Extra over granite or trap stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of face beds and joints as specified of random rubble walling uncoursed or brought upto course with 40mm maximum depression on face from straight edge held against the dressed surface complete all as specified and directed.

Material and labour for Flush pointing to random rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified directed.

Material and labour for mild steel TMT bars 8 to 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or secring with clips complete all as specified and directed.

Demolition of reinforced cement concrete of any descreption and in anyposition above or below ground level complete all as specified and directed.

Material and labour precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate), in cover slabs of manholes, open drains inclusive of form work set in CM (1:4) complete all as specified and directed. (Reinforcement shall be measured and paid separately)

Material and labour for Providing PCC (1:2:4) type B1 using 20 mm graded agg as in coping/Channel of drain etc complete all as specified and directed.

Demolition & breaking up drain pipes (salt glazed/AC/RCC ) set in CM,dia of pipe 150 mm dia complete all as specified and directed at site.

Material and labour for PCC (1 : 3: 6 ) type C2(using 40 mm graded aggregate) as in bed to drain pipe including packing under & haunching against the sides of pipes of 150 mm dia after they are laid tested. Note: Thickness of bed below pipe shall be 10cm and width shall be outer dia of pipe plus 30cm complete all as specified and directed.

Material and labour for reinforced concrete pipes, class NP2, laid and jointed complete with collars of dia 150 mm complete all as specified and directed.

Baljeet Singh Choudhari

Sunil Constructions

S.K.HARAL

M/S NILESH BUILDERS