8464 REPAIR TO ROOF PLUMBING JOINERY FLOORING PLASTERING PATH INTERNAL ELECTRIFICATION AND CONNECTED ITEMS TO CERTAIN BLDGS OF OFFRS MD ACCN IN TH AREA UNDER AGE B/R II OF GE SOUTH PUNE

Amount

Dismantling of plain or corrugated steel sheeting any gauge / thickness in roof covering etc, complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified & directed.

S&F 0.60 mm thick, grade 'O' galvanised corrugated mild steel sheeting with grade 'B' (zinc coating @ 120 gram per sqm inclusive of both sides) laid with two corrugation side lap fixed with 'J' or 'L' hooks etc. complete all as specified and directed.

Supply & fixing of 0.80 mm thick plain galvanised mild steel sheeting as in ridges, hips, valley gutter, drip and straight, flashing (zinc coating @ 120 gram per sqm inclusive of both sides) complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick, 150 GSM of any colour having tensile strengh of 550 mpa as of roof covering/ridges fixed with self tapping screws etc complete all as specified & directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc, complete all as specified and directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets as in roof, fixed with 'J' or 'L' type hook or cranked hook bolts with & including GI bitumen washer of suitable size, complete all as specified and directed.

All as per item no.7.00 above but except AC sheet, complete all as specified and directed.

M&L for asbestos cement two piece adjustable plain wing ridge, 6mm thick, fixed with 'J' or 'L' type hook or cranked hook bolts, complete all as specified and directed.

M&L for filleting in any position and to any shape in cement mortar 1:3, sction of fillet exc. 25 Sqcm but n. exc. 50 Sqcm including all mitres, stops, etc., complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Supply & fixing rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of etc. confirming to Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed.

M&L for mild steel framed work conforming to Fe-290 (Gde E-165) as in doors or gates of angle iron or other section complete drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running railsand guides) and hanging, also fastening and fixing complete all as specified and directed.

M&L for framed work as in grills, gratings etc. with ends of bars shouldered and / or rivetted, or forged into spikes; framed guard bars; barred iron door, railings and similar work conforming to Fe 290, Gde E-165, complete all as specified and directed.

Dismantling battens for tiles, shingles etc, of any size including tilting fillets, exc. 15 cm spacing, complete all as specified and directed.

M&L for IInd class hard wood clean sawn batten at 30 cm center to center sectional area exc 5 and n.exc 15 Sqcm etc, complete all as specified and directed.

All as per item No. 16.00 above but except battens, complete all as specified and directed.

Dismantling of Single layer Mangalore pattern or similar tiles in roofing, complete all as specified and directed.

M&L for roof tiles mangalore pattern Grade 'AA' interlocking at side joints laid dry etc complete all as specified and directed.

All as per item No. 19.00 above but except tiles, complete all as specified and directed.

M & L for ridge tiles or hip tiles suitable for mangalore pattern roofing tiles bedded and jointed in CM (1:6) etc , complete all as specified and directed.

Fixing only ridge tiles or hip tiles suitable for mangalore pattern roofing tiles bedded and jointed in CM (1:6) etc , complete all as specified and directed.

M & L for preparation of surface of wood and wood based materials and applying two coats of creosote oil to new wooden tiles battens of any size & spacing, (measured overall on one side only, spaces not deducted), complete all as specified and as directed .

Dismantling timber scantling in any position (unframed work) exceeding 40sqcm in section complete all as specified and directed.

Dismantling timber scantling in any position (unframed work) under 40sqcm in section complete all as specified and directed.

S&F IInd class hard wood timber clean sawn as in scantling complete all as specified and directed.

S&F in repairs IInd class hard wood boarding, 20mm thick, fixed with nails in any situation planed one side with butt joints, complete all as specified and directed.

Taking down chowkhat or frames wooden / steel exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frames wooden / steel n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each, complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.

S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm with and including MS hold fast - 3 Nos., MS cold rolld 100mm size butt hinges - 03 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.

S & F pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm with and including MS hold fast - 6 Nos., MS cold rolld 100mm size butt hinges - 06 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.

Cutting holes in brick / stone / concrete block masonry, built in cement mortar or cement lime mortar depth of embeded portion of hold fasts or lugs measured from the face of the jamb into the wall cutting exc. one brick but n. exc. two brick and making good the dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30mm thick flush shutters, solid core contruction, with block board core and plywood face panels, commercial type on both sides including 6mm thick 1st class hard wood teak beading allround on edges, complete all as specified and directed.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drawing given on relavent page of SSR Part-II 2020 Refer item No. 8080 as specified and directed by Engr-in-charge.

S&F 100 mm size stainless steel butt hinges medium weight, cold rolled, complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 150mm legth of excluded section, complete all as specified and directed.

S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed.

S&F mild steel 300 mm, ordinary rat tail pattern, spring including rollar and rollar plate , complete all as specified and directed.

S&F floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring, 140mm overall length of cover plate fixed in floor, complete all as specified and directed.

S&F double action floor spring spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main boady with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed

S&F in repairs mortice lock, 4 lever of brass body, vertical type of 1000mm size, complete all as specified and directed. Make:- Link / Harrison / Godrej

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F three track sliding window with two or more shutter witth 4 mm thick tinted glass , one shutter of stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing, handle lock, rubber beading and glazing clips etc by using following aluminium powder coated sections conforming to catalogue of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

S&F Aluminium powder coated single leaf door on pivots with and including hydraulic door closer door lock, handle, 5mm thick plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm thick pre-laminated particle board (Both side decorative) as bottom panel by using following sections as given in `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, complete all as specified and as directed. (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

S&F aluminium powder coated ventilator with moveable louvers including 100mm wide pinheaded glass strip etc by using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, complete all as specified directed by Engr-in-Charge (a) Frame - 20048 (b) Glazing clip - 19352

Hacking out old broken glass (any thickness, size, quality or description) from aluminium door / windows frames fixed with putty or fixed with beads and S & F new 5.5mm thick plain sheet glass, ordinary quality and glazing fixed with rubber beading packing and aluminiumbeadings as in exc. 0.50 sqm area of each pane, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from aluminium door / windows frames fixed with putty or fixed with beads and S & F new 3mm thick plain sheet glass, ordinary quality and glazing fixed with rubber beading packing and aluminiumbeadings as in n. exc. 0.50 sqm area of each pane, complete all as specified and as directed.

M&L for prepration of new or previously untreated wooden surface and apply two coats synthetic enamelled paint over one coat of pink primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified directed

M&L for prepration of new or prreviously untreated steel surface and applying two coats synthetic enamelled paint over one coat of red oxide primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified directed

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping including weathering and throating including necessary form work etc., complete all as specified and directed.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15 mm thick screed bed in CM 1:6,, complete all as specified and directed.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15 mm thick screed bed in CM 1:6,, complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including 2 mm thick wall care putty complete all as specified and directed.

M&L for Vitrified Ceramic tiles (Light shade), 10 mm thick Colour (square / rectangular) polished, area of each tiles exc .18 sqm but not exceeding 0.36 sqm, as in floors etc. of light shade, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete all as specified and as directed.

M&L for Vitrified Ceramic tiles (Light shade), 10 mm thick Colour (square / rectangular) polished, area of each tiles exc .18 sqm but not exceeding 0.36 sqm, as in skirting etc. of light shade, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in CM (1:4) including filleting etc complete all as specified and as directed.

M & L for glazed colour vitrified tiles of size 300mm x600mm x 7 to 8mm thick as on walls laid over and including 10 mm thick CM (1:4) backing coat , set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including filleting etc complete all as specified and directed.

M & L for glazed colour vitrified tiles of size 300mm x200mm x 6 to 7mm thick as on walls laid over and including 10 mm thick CM (1:4) backing coat , set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including filleting etc complete all as specified and directed.

M&L for 25 mm thick concrete 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in floor leveling course etc, complete all as specified and directed.

Demolition of stone slab & tiles of any description or thickness in floor, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.

M & L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, Door cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed.

M&L for machine cut cuddappa stone 20 to 22 mm thick both side polished bedded & jointed in CM (1:3) laid over and including of 20mm thick screed bed in CM 1:6, complete all as specified and directed.

M & L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw (as per manufacturer’s instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (Up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including two coats of oil bound distemper over primer on ceiling including dismantling of existing false ceiling with snap grid/cover fillets complete all as specified and directed.

M & L for carrying out non-destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/cracks in floor and wall and injecting injection of CORESEAL 135A/CORESEAL 135B all as per manufacturer’s instructions complete all as specified and directed by Engr-in-Charge. Note:- 1. The quoted rates deemed to be inclusive of replacement of any defective fittings / fixtures of any type / material elbows, bend, tee, reducer single 'Y', double 'Y' with cleaning eye and concealed piece of pipe below floor as well as between wall and bend. 2. Makes :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved.

M&L for coloured precast cement concrete interlocking paver block of glossy finish any shape and size confirming to IS-15658-2006, 60mm thick, M-35 grade with grey cement and no pigment laid over as in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and direcetd.

Demolition of cement concrete in any position /any depth, complete all as specified and direcetd by Engr-in-charge.

Taking down cement plaster from old brick / stone masonry walls etc. including racking out joints, hacking for keys and scrubbing down with water complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar, facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

M&L for precast coloured, chequrred cement concrete tiles, glossy finish of 400x400x25mm thick, conforming to IS-1237 (2006), set & jointed and pointed in neat cement slurry as in floors, laid over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate), 75 mm thick as in plinth protection / path laid as to bays finishing the surfaces even and smooth with out using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick/concrete surfaces finished even & smoth without using extra cement complete all as specified and as directed.

M&L for prepration of newly plastered sureface and applying two coats cement base paint complete all as specified and as directed.

M&L for prepration of newly plastered sureface and applying two coats of exterior emulsion weather proof paint, complete all as specified and as directed.

M & L for 15 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed.

M & L for 20 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down steel tubing and connections, complete all as specified and directed.

M&L for re-fixing of 15mm bore serviceable GI pipe obtained from item no. 83.00 with and including all fittings and fixtures complete, in new or old position, complete all as specified and directed.

M&L for re-fixing of 20mm bore serviceable GI pipe obtained from item no. 84.00 with and including all fittings and fixtures complete, in new or old position, complete all as specified and directed.

S & F in repairs gun metal gate valves (Class I), with iron wheel head, screwed both ends for iron pipe, ISI marked, all as specified and directed for the following bore dia of pipe:- (a) 15mm bore.

(b) 20mm bore.

S&F 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 142 gms), complete all as specified and directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms), complete all as specified and directed.

S&F 25mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 455 gms), complete all as specified and directed.

Cutting chases, pinning in, concrete block walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 500 Litres capacity, double layered, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tanks and removing to store, including making all connections to inlet and outlet pipe lines, complete all as specified and directed by Engineer-in-Charge.

S&F rotational moulded polyethylene water storage tank 1000 Litres capacity, double layered, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable water tanks and removing to store, including making all connections to inlet and outlet pipe lines, complete all as specified and directed by Engineer-in-Charge.

M & L for water proofing treatment to roof slab, wall, chajjas etc; shall be carried out as specified below including removing of old existing unserviceable water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust foregin material including flushing at junction of walll and removing the rubbish off the premises to a distance exc 500 m complete all as specified and directed by Engr-in-Charge :- (a) M & L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) M&L for preparing plastered surfaces of roof slab, walls, chajjas etc; by proofing with broom sweeping free from dust etc; evently applying a coat of approved bitumenous primer @ 0.20 Kg/Sqm on all surfaces. (c) M&L for laying APP polymer modified approved membrane, non woven, polyster, weighing not less than 3.50 Kg/Sqm with laps & overlaps as per manufacturer's instructions or as specified & joints sealed and applied complete by torch application method all as speciifed & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for to check the leakage & seepage and rectifying the same to the entire statisfaction of Engr-in-charge. (d) Finally applying a coat of solar reflective bitumenous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as speicifed & as directed by Engr-in-Charge.

M & L for 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13sqcm but not exceeding 25 sqcm, complete all as specified and directed.

M & L 18/19 mm thick perlaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard/ Pelmets with teak beading of all sides fixed in repair complete all as specified and directed.

S & F Continuous (piano) hinges 30 mm width of flap, mild steel, bright finish or electro galvanised, complete all as specified and directed.

S & F 100 mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw, complete all as specified and directed.

S & F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished, complete all as specified and directed.

S & F Magnetic door catches for cupboard/cabinet etc, complete all as specified and directed.

S&F in repair health faucet, brass chromium plated, ABS body, including 1.0mtr flexible cod complete all as specified and directed.

S&F in repairs 15 mm bore two way bib tap chromium plated, fancy type, cast copper alloy long body with wall flange complete all as specified and directed

S&F in repairs 15 mm bore PVC connection 600 mm long with PTMT nut and PVC washer, complete all as specified and directed.

S&F in repair transparent glass of 7.5x7.5 inch corner bath room shelves with bracket, complete all as specified and directed.

S&F in repairs 10 litres capacity, PVC flushing cistern, low level including PVC waste coupling & PVC flush pipe of 32 mm dia and complete internal macanism including fixing on existing brackets, complete all as specified and directed.

S&F in repairs CP toilet paper holder, complete all as specified and directed.

S&F in repairs Wall mixer 3 in 1 including telephonic shower for 15mm bore of pipe confirming to CAT No. CON-CHR-280KN OF "Jaquar" of equivalent cat part of make as mentioned here-in-after, complete all as specified and directed.

S&F brass chromium plated shower rose, 125mm size, fancy type, including shower arm, complete all as specified and directed.

S&F in repairs aluminium powder coated fancy type curtain rod 25 mm bore, medium weight, complete all as specified and directed by Engr-in-charge.

S&F aluminium powder coated fancy type decorative brackets suitable for 25 mm dia curtain rod (minimum projection from wall 75 mm ) fixed to wall including drilling, rawl plug, screws etc complete all as specified and as directed.

S&F in repair 15mm bore CP bib taps, brass chromium plated, cast copper alloy fancy type handle, screwed down, screwed for iron pipes fixed in repairs, complete all as specified and directed.

S&F in repairs 20mm bore ‘D’ type brass CP tubular towel rail 60 cm long between flanges complete fixed in repairs, complete all as specified and directed.

S&F in repairs stop valve brass chromium plated, fancy type with long shank and cup (concealed type) fixed to pipe of 15mm bore, complete all as specified and directed.

S&F in repair soap dish, brass chromium plated, complete all as specified and directed.

S&F in repair Stop valve / angular stop valve, brass chromium plated, fancy type, fixed to pipe of 15mm bore, complete all as specified and directed.

S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition of old unserviceable breaking up drain pipes PVC or AC set in CM or solvent, complete all as specified and directed.

S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition of old unserviceable breaking up drain pipes PVC or AC set in CM or solvent, complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore, complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore, complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore provided with access door, complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore provided with access door, complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore, complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore, complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore, complete all as specified and directed.

S&F PVC (SWR), 75mm dia outlet floor trap, plain with grating including jointing with solvent cement, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

S&F in repairs pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CP including 15mm bore pillar tap fancy type etc, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices with and including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repairs stainless steel sink 1.00 thick suitable for kitchen or laboratory with plug waste pipe washers including cantilivers cast iron brackets connecting union etc over all size 495mmx420mm with bowl size 410mmx330mmx160mm, complete all as specified and directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light etc, including taking down of old unserviceable boarding/ceiling of any description, fixed in any position etc with nails, complete all as specified and directed.

Taking down point wiring (light, fan, socket or power) any type complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M & L for point wiring using approved colour coding as per IS, with multi-stranded copper conductor 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, FRLS cable conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable with triple layers protection Make:- Finolex / polycab / Havell's drawn through in and including heavy duty PVC casing & capping of white/ ivory colour including all accessories after cutting chasing in wall of any type / ceiling etc, including making good of disturbed surface and applying two coats of white / colour wash / distemper on disturbed surface to match the existing surfaces, including with mild steel sunken boxes with earth dolly duly, covered with hylem sheet cover 3 mm thick, suitable for fixing of switches, fan regulators and sockets including PVC insulated multi-stranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- (a) One light/fan point controlled by one switch.

(b) One Socket outlet point, 5 Amp on independent board.

(c) One switch socket outlet point, 5 amps on the same board

All as per item No. 137.00 above but using 2.5 sq mm single core copper conductor cable of multi-stranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

Supply & fix switch piano single pole flush type 5 A, 240 volt one way, complete all as specified and directed.

Supply & fix switch socket combination 2 in 1, 5 Amps, flush type, complete all as specified and directed.

Supply & fix switch socket combination 3 pin, 5/16 amps 5 in 1 flush type, complete all as specified and directed.

Supply & fix modular electronic fan regulator step type 2 module type 240 volts suitable for ceiling fan, complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminals complete all as specified and as directed.

Gauri Associates

SARATH ENTERPRISES

M/s.BAJRANG CONSTRUCTION

Santosh Pandurang Pise