MISC COMPREHENSIVE MAINT SERVICES INCLUDING JOINERY, PLUMBING, WALL FINISHES AND ALLIED WORKS IN DOMESTIC AREA AT AF STN MANAURI

Amount

M&L for complete removal of existing treatment on walls complete all as specified and directed.

M&L for providing wall care putty not less than 2 mm thick complete all as specified and directed.

Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc and M&L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:6 complete finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces and applying 2 coats of OBD over a coat of primer complete all as specified and directed.

Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc and M&L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 complete finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new surface of wall including cornices and apply two coat of cement based paint etc complete all as specified and directed.

Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc and M&L rendering 10mm thick cement plaster 1:3 on ceiling surfaces and finishing even and smooth without using extra cement complete all as specified and directed.

Demolition of brick masonry built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan any radius as in half thick wall built in CM 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling including cornices and apply two of white wash complete all as specified and directed.

M&L for preparation of old surface of wall including cornices and apply one coat of cement based paint etc complete all as specified and directed.

M&L for preparation of old surface of wall including cornices and apply two coat of cement based paint etc complete all as specified and directed.

M&L for preparation of old surface and applying 2 coats of OBD complete all as specified and directed.

M&L for preparation of old surface and applying one coat of OBD complete all as specified and directed.

M&L for preparation of old plastered surface of walls including cornices and apply one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surface of ceiling including cornices and apply one coat of white wash complete all as specified and directed.

M&L for preparation of old wooden surface exceeding 10 Cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old wooden surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surface exceeding 10 Cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surface exceeding 10 Cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

All as per item No. 23.00 above but not exceeding 10 cm width or girth complete all as specified and directed.

M&L for preparation of old plastered surface exceeding 10 cm width or girth and apply two coat of plastic emulsion paint over a coat of primer complete all as specified and directed.

M&L for providing and applying fibre reinforced elastomeric liqiud water proofing membrane with resililent acrylic polymershaving sun reflevtive index (SRI) of 105 manufactured by asian paint Ltd, Berger, Pidilite or equvalent as approved by Engr-in-Charge in three coats at 10.76 ltr/10Sqm. One coat of self priming of elastomaric water proofing liquid. The operation shall be caiied out after scrapping and properly cleaning loose particle with wire brushes complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30cm high including one coat of synthetic enamel paint on the plastered surface before writing etc, complete all as specified and directed.

M&L for stops, comma, short lines, dashes. Hyphen, brackets etc complete all as specified and directed.

M&L for applying One coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 20 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified and directed.

M&L providing and injection chemical emulsion of post construction atitermite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

S&F in replacement GI water tubing/pipe 15 mm bore with all fittings fixed to wall or laid in floors or celings including taking out old rusted pipes in any position compete all as specified and directed

S&F in replacement GI water tubing/pipe 20 mm bore with all fittings fixed to wall or laid in floors or celings including taking out old rusted pipes in any position compete all as specified and directed.

S&F in replacement angle valve of 15 mm bore CP high pressure screwed for iron pipes or brass ferrule compete all as specified and directed.

S&F in replacement two way angle valve of 15 mm bore CP high pressure screwed for iron pipes or brass ferrule compete all as specified and directed. Make: Cera Catpart No.7311 / Prayag / Parryware (super fine)

S&F in replacement Pillar taps, 15mm bore CP with with capstan heads, long body screwed down, screwed for lron pipe high pressure with lettered "hot or Coled" with long shank complete all as specified and directed.

S&F in replacement Stop valves, 15mm bore cast copper alloy, fancy type CP screwed down high pressure screwed both ends for iron pipes or for unions compete all as specified and directed.

S&F in replacement chromium plated cast copper alloy bib taps 15 mm bore fancy type long body capstan head handles half turn compete all as specified and directed.

S&F replacement PVC valveless, syphonic action type, flushing cistern, low level, white colour capacity 10 liters with inlet and outlet, ball valve, handle including cast iron brackets & 32 mm bore PVC flush pipes & PVC connection pipe, compete all as specified and directed.

S&F in replacement vitreous china WHB white colour of size 600X480 mm flat back or angle back type including angle iron bracket, waste coupling, PVC waste pipe 32 mm dia 60 cm long fixed pinning in ends of brackets, compete all as specified and directed.

S&F in replacement Vitreous china squatting pan, orissa pattern, size 580x440 mm white, with integral foot rests including connection to trap and to flushing pipe, anti syphonage pipe including making good to floor with PCC 1:2:4 or cement sand mortar 1:3 complete all as specified and directed.

S&F in replacement Vitreous china wash down water closet pan (pedestal pattern) white colour excluding fixing bolts, flushing cistern & flush pipe) but including seat cover,Jet spray white colour complete all as specified and directed.

S&F in replacement looking mirror fancy type decorative pattrern 5 to 6 mm thick fixed on wall with stainless steel studs complete all as specified and directed.

S&F in replacement Chromium Plated towel rail 600 mm long D type fixed with CP screw & wooden/plastic cleats etc complete all as specified and directed.

S&F in replacement PVC connections 15mm size with PTMT nuts and bolts of length 600 mm etc complete all as specified and directed.

S&F in replacement PVC waste pipe 32/40mm dia 610mm long suitable for WHB or Sinks etc complete all as specified and directed

Taking down eaves gutters, rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to stores complete all as specified and directed.

S&F 110mm PVC SWR pipes single socketed in any length laid in trenches or in floor & walls with MS clamps etc complete all as specified and directed.

S&F 75mm PVC SWR pipes single socketed in any length laid in trenches or in floor & walls with MS clamps etc complete all as specified and directed.

S&F in replacement PVC (SWR) bends any radius 110mm dia complete all as specified and directed.

S&F in replacement 110 mm dia PVC floor(P or S) trap including grating fixed in floor with cement complete all as specified and directed.

S&F in replacement PVC (SWR) single T equal or unequal 110mm dia complete all as specified and directed.

S&F in replacement PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

S&F in replacement PVC (SWR) single T equal or unequal 75mm dia complete all as specified and directed.

S&F in replacement 75mm dia PVC floor trap including grating fixed in floor with cement complete all as specified and directed.

S&F in replacement Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in replacement ball brass float valves, high pressure, with polythelne float and fly nut in 20mm bore complete all as specified and directed.

S&F in replacement soap dish SS ISI mark complete all as specified and directed.

S&F in replacement health faucet (ABS body) mild steel CP suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and in fixed in position complete in all respect as complete all as specified and directed.

S&F in replacement sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in replacement tubular towel rail 20mm dia 'D' type, 600mm long of CP fixed with and including CP brass screws and wooden/plastic cleats complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutter from the frame) area n.exc 1.5 Sqm complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S&F in opening as per specification & drawing complete all as specified and directed.

M&L factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet stripo of 20mm width stuck inside with solvent cement for stiles and plain colour sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, S&F in the frame at site complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4.00 Sqm complete all as specified and directed.

S&F second class hard wood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but n.exc 2.0 Sqm each complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and directed.

S&F for second class hardwood glazed and skeleton door shutters 30mm thick, open rebated and prepared to receive glass gauge etc edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc complete all as specified and directed.

S&F in replacement galvanized mild steel wire cloth 0.56 nominal dia of wire and avg width of aperture 1.18 mm and fixed with tinned tacks or glavanized wire stables, beads or in steel windows complete all as specified and directed.

S&F in galvanized mild steel wire cloth 0.56 nominal dia of wire and avg width of aperture 1.18 mm and fixed with tinned tacks or glavanized wire stables, beads or in steel windows complete all as specified and directed.

S&F in replacement mild steel chromium plated curtain rod 25 mm dia with fixing with brackets & side decorative finials etc complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp, staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250mm long complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel 100mm size complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel 75mm size complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F aluminium handle fabricated type anodised 150mm long complete all as specified and directed.

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri if not specified in BOQ

AMRESH TRADERS

M/S Garg Sons

HIMANSHU TRADERS