Active

Goods

Metals - Ferrous

Manufacture and supply of Victaulic Type Couplings for PH II SGTPS Birsinghpur and PH IV STPS Sarni , Outlet Ventury Assembly and MPO Outlet Spool piece for PH II SGTPS Birsinghpur Air seal Ring Upper for PH IV STPS Sarni

Madhya Pradesh Power Generating Company Limited

Jabalpur, Madhya Pradesh

Amount: ₹1.4 CrCloses: 14 Oct 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published29 Sept 2026
Submission Opens30 Sept 2026
Closes14 Oct 2026
Bid Opening16 Oct 2026

Tender Value

₹1.4 Cr

EMD Value

₹2 L

Closing Date

14 Oct 2026, 3:00 pm5d left

Tender Inviting Organisation

Name

CE MM MPPGCL Jabalpur

Address

CE MM MPPGCL Jabalpur Address O/o ED MM, MPPGCL, BLOCK No.8, GROUND FLOOR, SHAKTI BHAVAN, RAMPUR, JABALPUR (M.P.)

Work Description

Manufacture and supply of Victaulic Type Couplings for PH II SGTPS Birsinghpur and PH IV STPS Sarni , Outlet Ventury Assembly and MPO Outlet Spool piece for PH II SGTPS Birsinghpur Air seal Ring Upper for PH IV STPS Sarni

Tender Information

Tender ID

2026_MPPGC_527635_1

Reference Number

CE(MM)/P-II/VENTURY

Tender Type

Open Tender

Product Category

Metals - Ferrous

Form of Contract

Item Wise

Period of Work

150 days

Location

Jabalpur

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per NIT

Documents Required

23 documents required · 23 mandatory

Fee/PreQual/Technical

RequiredFee payment or exemption documents as per NIT clause 4 (.pdf)

RequiredEMD Payment or exemption document as per NIT clause 5 (.pdf)

RequiredPQR-Manufacturer as per NIT 6.9 (a) (.pdf)

RequiredGST registration certificate as per NIT clause 6.9 (a) (.pdf)

RequiredPQR-Order copies for past experience as per NIT 6.9 (b) (.pdf)

RequiredPQR-Turnover documents and certificate issued by CA containing UDIN as per NIT clause 6.9 (c) (.pdf)

RequiredPQR-Affidavit for no insolvency and bankruptcy on Rs. 200 NJS Paper as per NIT clause 6.9 (d) (.pdf)

RequiredAffidavit for No banning /blacklisting/delisting on Rs. 200 NJS paper as per NIT Clause 2(e) (.pdf)

RequiredDSC details (.pdf)

RequiredUndertaking as per Annexure-III of SBD for successful Execution of Contracts (.pdf)

RequiredUndertaking as per Annexure-IV of SBD for fair and ethical practices (.pdf)

RequiredTender acceptance letter as per Annexure-XI of SBD (.pdf)

RequiredChecklist of formats / documents as per Annexure XV of SBD (.pdf)

RequiredModel Certificate as per NIT Clause 22 (IX) (.pdf)

Requiredtnc-unpriced replica of price bid (.pdf)

RequiredQuality assurance plan (.pdf)

RequiredAuthority letter to submit offer on behalf of firm as per NIT clause 3 (j) (.pdf)

RequiredMSME Registration Certificate (if any) (.pdf)

RequiredSigned copy of SBD and Tender Specification (.pdf)

RequiredTnc-Techno commercial bid (.rar)

RequiredDeviation Sheet as per Technical Specification (.pdf)

RequiredAll Relevant IS Standards (.pdf)

Finance

RequiredPrice Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹5,000

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹2 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

29 Sept 2026

Published

29 Sept 2026

Bid Opening

16 Oct 2026

Download Starts

29 Sept 2026

Download Ends

14 Oct 2026

Submission Starts

30 Sept 2026

Bill of Quantities

Item WiseBoQ_Ver4.0INR

BoQ1 (6 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1SGTPS Birsinghpur
1.01	Victaulic Type Couplings (23.5”) with Gasket (Silicon rubber)for PH-III, SGTPS, Birsinghpur as per Drg. No. 07-08/BLR-222 Material – ASTM-A47 Fasteners-MS (04nos track Bolts & nut) Drg. No. 07-08/BLR-224 Gasket Material- Neoprene Rubber Shore Hardness-58-70 A	40	Nos	-	-
1.02	Victaulic Type Couplings (26”) with Gasket (Silicon rubber) for PH-III, SGTPS, Birsinghpur as per Drg. No. 07-08/BLR-221 Material – ASTM-A47 Fasteners-MS (06nos track Bolts & nut) Drg. No. 07-08/BLR-224 Gasket Material- Neoprene Rubber Shore Hardness-58-70 A	60	Nos	-	-
1.03	Outlet Ventury (Turret Assembly) of ABL make 8.5 E9 Coal Mill PH- II SGTPS MPPGCL Birsinghpur as per Drawing No. (1) MISC/H-1750 (2) SGTPS/040 Material-Cone, Top Plate & Flanges: IS 2062/2006 Gr. A/B Liners : IS 210/Gr. FG 300	5	Nos	-	-
1.04	MPO (Mill Outlet Spool Piece) for PH-II SGTPS-Birsinghpur liners duly fitted with fasteners as per drawing No. (Drg. No. SGTPS/PH-II/BMD-II/01) MPO Body & Flanges: IS 2062/2006 Gr. A/B Liners : IS 210/Gr. FG 300 Fasteners: 1. Hex Head Bolt with Nut and Washer (M30x120, MS, 36 Nos.) 2. CS Bolt with Nut and Washer 6 (M20x55, HT Gr. 8.8, 4 Nos.)	56	Nos	-	-
2CHP-II, STPS-Sarni
2.01	Victaulic Type Couplings (22”) with Gasket as per Drg. No. 07-08/BLR-210 Material :– ASTM-A47 Gasket Material : Neoprene Rubber Fasteners-MS	50	Nos	-	-
2.02	Air seal Ring Upper for PH-IV, STPS- Sarni (Material- Cast Steel conforming to AISI-5132) as per Drg. No. 07-08/BLR-233	36	Nos	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.05 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.18 MB

Work Item Documents

SBD.pdf

Tender Documents • 2.30 MB

SBD_AMENDMENTS.pdf

Tender Documents • 0.65 MB

emdformatnew1.pdf

Tender Documents • 0.10 MB

InstructionsToBidderForOnlineBidSubmission.pdf

Tender Documents • 0.45 MB

BOQ_648427.xls

BOQ • 0.39 MB

TS527635.pdf

Tender Documents • 1.10 MB

Model_Certificate.pdf

Tender Documents • 0.01 MB

TECHNOCOMMERCIAL.xls

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1SGTPS Birsinghpur
1.01	Victaulic Type Couplings (23.5”) with Gasket (Silicon rubber)for PH-III, SGTPS, Birsinghpur as per Drg. No. 07-08/BLR-222 Material – ASTM-A47 Fasteners-MS (04nos track Bolts & nut) Drg. No. 07-08/BLR-224 Gasket Material- Neoprene Rubber Shore Hardness-58-70 A	40	Nos	-	-
1.02	Victaulic Type Couplings (26”) with Gasket (Silicon rubber) for PH-III, SGTPS, Birsinghpur as per Drg. No. 07-08/BLR-221 Material – ASTM-A47 Fasteners-MS (06nos track Bolts & nut) Drg. No. 07-08/BLR-224 Gasket Material- Neoprene Rubber Shore Hardness-58-70 A	60	Nos	-	-
1.03	Outlet Ventury (Turret Assembly) of ABL make 8.5 E9 Coal Mill PH- II SGTPS MPPGCL Birsinghpur as per Drawing No. (1) MISC/H-1750 (2) SGTPS/040 Material-Cone, Top Plate & Flanges: IS 2062/2006 Gr. A/B Liners : IS 210/Gr. FG 300	5	Nos	-	-
1.04	MPO (Mill Outlet Spool Piece) for PH-II SGTPS-Birsinghpur liners duly fitted with fasteners as per drawing No. (Drg. No. SGTPS/PH-II/BMD-II/01) MPO Body & Flanges: IS 2062/2006 Gr. A/B Liners : IS 210/Gr. FG 300 Fasteners: 1. Hex Head Bolt with Nut and Washer (M30x120, MS, 36 Nos.) 2. CS Bolt with Nut and Washer 6 (M20x55, HT Gr. 8.8, 4 Nos.)	56	Nos	-	-
2CHP-II, STPS-Sarni
2.01	Victaulic Type Couplings (22”) with Gasket as per Drg. No. 07-08/BLR-210 Material :– ASTM-A47 Gasket Material : Neoprene Rubber Fasteners-MS	50	Nos	-	-
2.02	Air seal Ring Upper for PH-IV, STPS- Sarni (Material- Cast Steel conforming to AISI-5132) as per Drg. No. 07-08/BLR-233	36	Nos	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1SGTPS Birsinghpur

1.01

Victaulic Type Couplings (23.5”) with Gasket (Silicon rubber)for PH-III, SGTPS, Birsinghpur as per Drg. No. 07-08/BLR-222 Material – ASTM-A47 Fasteners-MS (04nos track Bolts & nut) Drg. No. 07-08/BLR-224 Gasket Material- Neoprene Rubber Shore Hardness-58-70 A

Nos

1.02

Victaulic Type Couplings (26”) with Gasket (Silicon rubber) for PH-III, SGTPS, Birsinghpur as per Drg. No. 07-08/BLR-221 Material – ASTM-A47 Fasteners-MS (06nos track Bolts & nut) Drg. No. 07-08/BLR-224 Gasket Material- Neoprene Rubber Shore Hardness-58-70 A

Nos

1.03

Outlet Ventury (Turret Assembly) of ABL make 8.5 E9 Coal Mill PH- II SGTPS MPPGCL Birsinghpur as per Drawing No. (1) MISC/H-1750 (2) SGTPS/040 Material-Cone, Top Plate & Flanges: IS 2062/2006 Gr. A/B Liners : IS 210/Gr. FG 300

Nos

1.04

MPO (Mill Outlet Spool Piece) for PH-II SGTPS-Birsinghpur liners duly fitted with fasteners as per drawing No. (Drg. No. SGTPS/PH-II/BMD-II/01) MPO Body & Flanges: IS 2062/2006 Gr. A/B Liners : IS 210/Gr. FG 300 Fasteners: 1. Hex Head Bolt with Nut and Washer (M30x120, MS, 36 Nos.) 2. CS Bolt with Nut and Washer 6 (M20x55, HT Gr. 8.8, 4 Nos.)

Nos

2CHP-II, STPS-Sarni

2.01

Victaulic Type Couplings (22”) with Gasket as per Drg. No. 07-08/BLR-210 Material :– ASTM-A47 Gasket Material : Neoprene Rubber Fasteners-MS

Nos

2.02

Air seal Ring Upper for PH-IV, STPS- Sarni (Material- Cast Steel conforming to AISI-5132) as per Drg. No. 07-08/BLR-233

Nos