Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.2 L
Closing Date
15 Jul 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
Above/Below/Par
CONS
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB(GCC) of tender document, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: •Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or •Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or •One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Any 25 kV Railway Traction Over Head Equipment(OHE) work.
24 conditions · 10 needing a document upload
The tenderer should submit the consent in a mandate form of Enclosure-1 for receipt of payment through NEFT
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Certificates which may be an attested Certificate from the client, Audited Balance Sheet duly certified by the Chartered Accountant etc regarding contractual payments received in the past
Tenderer shall indicate their GSTIN No. & PAN No. with proper document proof.
If the tenderer wish to submit Bank guarantee for bid security (EMD), the Tenderer shall download the Tender Document Annexure -VI A for bid security in the form of bank guarantee and upload the Annexure -VI A duly filling the necessary details. The original Bank Guarantee should be delivered in person to Office of the PCEE, II floor, Shell Administrative building, ICF, Chennai - 600 038 before closing date for submission of bids (i.e. excluding the last date of submission of bids)
Startups are not exempted from satisfying the Eligibility criteria for this tender.
The Tenderer shall have valid required level Electrical License. Attested copy of the Electrical License shall be submitted along with the offer.
The successful tenderer shall prepare and submit the Scheme for wiring along with layout of arrangement of Electrical switchgear drawings according to the site and obtain approval from the competent authority or their authorized representative prior to the commencement of work.
After completion of all wiring and installation, the successful tenderer shall submit 3 sets of General arrangement and Schematic drawings along with the electrical wiring documentation.
The rate quoted shall be net inclusive of all taxes (GST) and duties.
The Contractor has to engage only Police verified Pvt. labour /Pvt. Employee. If any new person (other than already verified) to be engaged by the contractor, he has to submit proof of Police verification application for issuing a "Temporary permission" like present permit system. However, Contractor has to arrange PV report within permissible period of one month.
The tenderer shall download the Tender Document Annexure -I and upload the Annexure -I duly filling the necessary details.
Electrical works for proposed extension of Road-1A, Road-1 & Road-3 for stabling capacity of 24 car rake in ICF Villivakkam Yard.
2026245212191R
2026245212191R
Open
Works - General
12 Months
Chennai, Tamil Nadu
₹0
₹2.2 L
15 Jul 2026
20 Jun 2026
1 Jul 2026
87 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,09,97,849 | ||
| — | 15.00 | — | — | ||
| Preparation of designs and drawings for overhead equipment and verification of purchasers engineering plan submission of CSD, LOA as per ICF specification. | — | — | — | 2,89,665 | |
| — | 235.00 | — | — | ||
| For Foundation trench and Plinth-Concrete in other than hard soil and rock (Supply & erection) as per ICF specification. | — | — | — | 27,23,650 | |
| — | 18.00 | — | — | ||
| Erection of traction masts and main masts of switching stations, booster stations and LT supply transformer stations by manual as per ICF specification. | — | — | — | 1,68,750 | |
| — | 18.00 | — | — | ||
| Supply only for fabricated mast K, B, S series etc., as per ICF specification. | — | — | — | 25,73,856 | |
| — | 4.00 | — | — | ||
| Supply of fabricated steel work (SPS) as per ICF specification. | — | — | — | 5,83,856 | |
| — | 4.00 | — | — | ||
| Erection of fabricated steel work (SPS) as per ICF specification. | — | — | — | 34,976 | |
| — | 7.00 | — | — | ||
| Supply & erection of a Guy Road assembly as per ICF specification. | — | — | — | 1,30,606 | |
| — | 35.00 | — | — | ||
| Supply & erection of a single bracket assembly as per ICF specification. | — | — | — | 13,35,040 | |
| — | 1.20 | — | — | ||
| Supply (excluding supply of copper contact wire) and erection contact wire only (regulated with bridle wire) by manual as per ICF specification. | — | — | — | 1,99,590 | |
| — | 3.00 | — | — | ||
| Supply & erection of regulating equipment (3 pulley type) with counterweight assembly for conventional composite OHE as per ICF specification. | — | — | — | 4,37,340 | |
| — | 4.00 | — | — | ||
| Supply & erection of materials for terminating double overhead equipment conductor as per ICF specification. | — | — | — | 89,668 | |
| — | 500.00 | — | — | ||
| Supply of material for Termination of copper cross feeder with gantries including cross feeder wire as per ICF specification. | — | — | — | 9,91,000 | |
| — | 0.50 | — | — | ||
| Erection of material for Termination of copper cross feeder with gantries including cross feeder wire as per ICF Specification. | — | — | — | 26,000 | |
| — | 15.00 | — | — | ||
| Modification to existing OHE as per ICF Specification. | — | — | — | 30,000 | |
| — | 1.00 | — | — | ||
| Supply and erection for creation of new IOL/UIOL on existing electrified Track as per ICF specification. | — | — | — | 45,896 | |
| — | 4.00 | — | — | ||
| Supply and erection portion of splicing and extension of an anchor overhead equipment as per ICF specification. | — | — | — | 43,676 | |
| — | 2.00 | — | — | ||
| Supply anti-creep with cadmium copper catenary wire as per ICF Specification. | — | — | — | 26,346 | |
| — | 2.00 | — | — | ||
| Erection of anti-creep with cadmium copper catenary wire as per ICF specification. | — | — | — | 6,210 | |
| — | 22.00 | — | — | ||
| Supply of 9 Tonne cut insulator as per ICF Specification. | — | — | — | 2,53,550 | |
| — | 22.00 | — | — | ||
| Erection of 9 Tonne cut insulator as per ICF Specification. | — | — | — | 1,00,760 | |
| — | 50.00 | — | — | ||
| Supply & erection of structure bond as per ICF specification. | — | — | — | 65,750 | |
| — | 50.00 | — | — | ||
| Supply & erection of Longitudinal bond as per ICF specification. | — | — | — | 1,23,250 | |
| — | 50.00 | — | — | ||
| Supply & erection of transverse & special bond as per ICF specification. | — | — | — | 1,23,250 | |
| — | 2.00 | — | — | ||
| Supply and erection of under boom arrangement as per ICF Specification. | — | — | — | 31,956 | |
| — | 5.00 | — | — | ||
| Supply & erection of copper jumper as per ICF specification. | — | — | — | 29,145 | |
| — | 50.00 | — | — | ||
| Supply & erection of Number plates, Stenciling etc., as per ICF specification. | — | — | — | 31,000 | |
| — | 15.00 | — | — | ||
| Dismantling of single bracket assembly as per ICF Specification | — | — | — | 30,000 | |
| — | 22.00 | — | — | ||
| Dismantling of OHE Mast/Structure by cutting as per ICF Specification. | — | — | — | 1,13,322 | |
| — | 6.00 | — | — | ||
| Dismantling of Guy Rod as per ICF Specification. | — | — | — | 19,350 | |
| — | 0.70 | — | — | ||
| Dismantling of overhead equipment as per ICF Specification. | — | — | — | 31,500 | |
| — | 1.00 | — | — | ||
| Dismantling of regulating equipment (Three pully type) with counterweight assembly for conventional/composite OHE as per ICF specification. | — | — | — | 7,589 | |
| — | 1.00 | — | — | ||
| Dismantling anti-creep with cadmium copper catenary wire as per ICF specification. | — | — | — | 6,582 | |
| — | 1.00 | — | — | ||
| Dismantling of fabricated steel work (SPS) as per ICF Specification. | — | — | — | 7,985 | |
| — | 2.00 | — | — | ||
| Dismantling of under boom arrangement as per ICF specification. | — | — | — | 4,000 | |
| — | 2.00 | — | — | ||
| Dismantling of section insulator as per ICF Specification. | — | — | — | 4,130 | |
| — | 1.00 | — | — | ||
| Dismantling of double pole isolator as per ICF Specification. | — | — | — | 2,689 | |
| — | 10.00 | — | — | ||
| Dismantling 9 tonne cut insulator as per ICF Specification. | — | — | — | 15,280 | |
| — | 0.50 | — | — | ||
| Dismantling of feeder wire as per ICF specification. | — | — | — | 26,000 | |
| — | 35.00 | — | — | ||
| Dismantling of a structure bond/ longitudinal bond/ transverse and special bond as per ICF specification. | — | — | — | 15,365 | |
| Lumpsum | 1.00 | — | — | ||
| Extra on erection charges 100% under power block as per ICF specification. | — | — | — | 65,982 | |
| Lumpsum | 1.00 | — | — | ||
| Carriage of Materials as per ICF specification. | — | — | — | 15,689 | |
| — | 150.00 | — | — | ||
| Supply & erection of 25 KV Caution Board of size: 300x225x2mm as per Drg. No. ETI/OHE/P/7531 (HINDI/ENGLISH) - Enamel Type as per ICF specification. | — | — | — | 1,15,200 | |
| — | 100.00 | — | — | ||
| Erection of Nylon mesh on existing drop arms as per ICF specification. | — | — | — | 22,400 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
930TenderDocument.pdf
ATTACHMENT
IRGCCACSCombined_3.pdf
ATTACHMENT
AnnexureVIABidSecurity.pdf
ATTACHMENT
LISTOFCONTRACT.pdf
ATTACHMENT
LISTOFPERSONNEL_1.pdf
ATTACHMENT
IRGCC_April-2022.pdf
ATTACHMENT
annex6B.pdf
ATTACHMENT
NEFTForm.pdf
ATTACHMENT
LISTOFMachinery.pdf
ATTACHMENT
LISTOFWORKSONHAND.pdf
ATTACHMENT
TenderFormAnnexure-I.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .