SPECIAL REPAIR TO BUILDING NO P 163 AT NOFRA I UNDER GE (P) VASCO

Amount

Demolition of brickwork or stone/ boulder masonry wall, built in cement mortar complete all as specified and directed.

M & L for precast cement concrete block masonry with solid block exc 10 cm in width and setting in CM (1:6) 1:3:6 type C-1 using 20mm graded stone aggregate compete all as specified and directed.

M & L for chipping removing carefully concrete work by low impact hammer,concrete cutter machine , breakar without damaging the structure & cleaning and disposal of debries out side the premises etc complete all as specified and directed by Engr-in Charge. Hard concrete should not be removed by force.

M/L for Clean existing reinforcement with wire/ rotary wire brush making the surfaces free from loose material dirt etc complete, Applying two coats of alkaline rust converting primer FEOVERT of Krishna conchem or Dr. Fixit equivalent confirming to ASTM-B-117 on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 6 hour between the coats and applying protective coating IPNET-RB complete all as specified and directed by Engr-in Charge.

M&L for Carry out application of 'Bi-polar migratory corrosion inhibitor' EPCO-KP-100 or equivalent on concrete surface. This inhibitor has migratory kind of property which permits the material to migrate to a vertual extent of 100mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It has properly to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete.

M&L for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep hole in structural members at the interval of 500mm center to center in staggered manner or as directed by Engr-in-Charge in RCC structural element. Work shall b e carried out as under :- (i) Cleaning of holes - Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles - Insert 12mm dia Rohibb Teflon nozzles in cleaned holes. External end of nozzlesto be machine to receive outlet of grouting gun. Fix it inside the hole by applying thixotropic epoxy putty to ensure complete sealing . Cure the system for min 12 hrs. (iii) Cutting of nozzles - Cut the nozzles by chiser after completion of grouting without damaging structural elements.

M&L for Injecting low viscosity MONOPOL (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, including mixing of material. Mixing of materials :- Mixing of material components (part a&b) in the required quantities as per manufacturer's instruction by weigh batching. Grouting maintain the pressureat exit (0.5 to 1.0 kg/cm2) by monitoring pressure gauge at exit. Grout the material through prefixed nozzles in the structural element @ 100ml per nozzle. Repeat the process for all the nozzles. (Beam and columns)

S&F structural grade EPIBOND-21-LP prior to application of any type of mortar plaster conferming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete.

Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 =1-MONOBOND, 5-Cement, 15-Sand) in damaged areas in 20mm thickness including leveling profiling etc complete.

Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 =1-MONOBOND, 5-Cement, 15-Sand) in damaged areas in 40mm thickness in two layers including leveling profiling etc complete.

M&L cutting out cracks to 'V'section not exceeding 5mm in existing roofs and walls by using machine cleaning the groove to remove all loose laitance & washing with water applying crack fillet Dr. Fixit crack-X Paste/Dr. Fixit crack X powder with the aid of a putty blade compete all as specified and directed.

M&L Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.(Note:-Upto and including 12mm dia)

M&L apply one layer of concrete 20-40mm avg thickness comprises composition 50kg cement, 3 to 6mmm chips 100kg & sand 50kg mixed with spray set SL 3 to 2.5% by weight of cement and 12.5 to 16.5ltrs of water mixed with admixture including bonding agent as approved to old rusted reinforcement after necessary preparation of surfaces by brush application and guniting with pressure nozzle with a delivery capacity of 2.5kg/sqm complete all as specified and as directed by Engr in Charge

M&L for jacketing arround columns with Micro concrete (Molith-MC) M-40 including all lifts, shuttering, drilling holes and fixing shear Anchor as per specification complete. Note:- Reinforcement shall be measured and paid saperately, (Rates including jacketing, formwork and Micro concrete)

M&L for preperation of surface with wire brush and remove loose particle & liatance , wash with clean water , damaged or hollow portion , sharp edges etc must be cut and removed till the mother slab . Filling the cracks and damaged portion with polymer mortar and allow it to cure for 24 hrs .Brush apply the first priming coat (Dr Fixit primeseal or equivalent ) on prepared concrete or plastered surface by diluting two parts of primeseal with one part of water and allow to dry for 4 hours .Apply the first coat of waterproofing coating (Dr Fixit newcoat / waterseal concentrate of M/S Krishna Conchem products ) without dilution at the rate of 2 sqm per litre over the primed surface .On the wet surface of 1st coat overlay a open woven fibre glass mesh min 40 GSM of size 2mm x 2mm and allow it to soak completely.Immediately apply the second coat with a roller , to ensure complete coverage of the fibre mesh .Apply the third coat after 6 to 8 hrs once the second coat is dry . Drying time between coats will be 6 to 8 hours all as directed and as per manufacturers instructions.

M&L for surface preperation by mechanical means to remove all loose particles liatance , oil and greese etc and applying two coats of Dr Fixit pidfin 2K all over the sunken portion and upwards over the masonry wall upto 6-7 feet and 6 to 8 hours after completion of first coat , take up second coat application in a direction perpendicular to the first coat . After the second coat is completely dry apply a 3 rd coat of Dr Fixit Pidfin 2K and sprinkle coarse sand while it is still wet .

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

Taking down Chowkhats or frames exc. 1.5 sq. m but m. exc 4 sqm each with shutters (without taking off shutters from the frames).

Taking down wooden shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.

Taking down,easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws,etc and refixing in same opening , shutters of any description exc 1 sqm and n exc 2 sqm each Shutters of any description n exc 1 sq. m each all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) all as specified and as directed by Engr-In-Charge.

S&F glazing with 4 mm thick sheet glass ordinary type including rubber beddings/gasket around glass panes in repairs all as specified.

S&F in repairs Glazing with figured glass(Frosted), pin head type, 3mm thick, and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.

S&F in repairs aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick of make M/S Kiran Netting or equivalent as approved by GE.

M&L for PCC type C1 1:3:6 (using 20 mm graded aggregate) for filling the holes of the hold fasts.

S& F MS flat iron 25 x 3 mm as in hold fast for fixing if chowkats compete all as specified and directed.

S&F 2nd class H/W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at junctions all as specified.

M&L forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and plastring to match existing work in cement mortar 1:6 etc. complete.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as per specified and as directed by Engineer-in-charge.

S&F second class Hard wood, 30 mm thick, glazed skelton shutter, open rivetted & prepared, with sash bar, divided into square with plane chamfered or rounded, mitred and rivetted sash bars any numbers compete all as specified and directed.

M& L for Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life compete all as specified and directed.

M&L for Providing Factory Made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Flush Door Shutter of required size comprising of virgin PVC resin of K Value 58-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives,(maximum toxicity index of 12 for 100gms) made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 1800 N ( Face ) & 900 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen /Balcony Doors all as specified and directed

M & L in floor door stopper 150mm of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be complete all as specified and directed.

M & L for two coat of synthetic enamel painting over a coat of pink primer new preparation of wooden surface over 10 cm width or girth complete all as specified and directed.

M & L for preparation of old wooden surfaces over 10 cm width or girth or given & applying one coat of synthetic enamel paint complete all as specified and directed.

S & F in butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed.

S & F butt hinges cold rolled mild steel 75mm size complete all as specified and directed.

S & F 150 mm long Aluminium handles, cast type complete all as specified and directed.

S&F brass handles of 100mm,decorative type complete all as specified and directed.

S&F alumiunium alloy, anodized, sliding door bolt, 300 mm, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm complete all as specified and directed.

S&F in repair 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.

S&F in repairs PVC door bottom weather strip door brush sweep seal fixed complete all as specified and directed.

S & F in repairs Curtain rails, 25 mm dia fancy drapery curtain rod made of aluminium powder coated duly PVC sleeved with pair of fency brackets and finial fixed in repair complete all as specified.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Supply & Fixing of 18 mm thick Rajshri wpc ply of Plain color fixed with screws, solvent cement/ adhesive to make kitchen cabinet or wardrobe sides top and bottom and shelves inside the cabinets complete all as specified and directed.

Supply & Fixing of 18 mm thick Rajshri wpc ply of one side Prelam/Rigidlam and other side plain white colour to make kitchen cabinet or wardrobe Shutter/ drawer Front shutters complete all as specified and directed.

Supply & Fixing of 12 mm thick Rajshri wpc ply of plain white colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet or wardrobe back and pull out drawer sides complete all as specified and directed.

Supply & Fixing of 12 mm thick Rajshri wpc ply of One side Prelam/Rigidlam and other side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet or wardrobe back covering and pull out drawer base complete all as specified and directed.

Supply & Fixing in repair of auto closing hinges openable at 0 degree for kitchen cabinet or wardrobe shutters complete all as specified and directed.

Supply & Fixing in repair of Ball bearing runners 45 mm Telescopic Channel ( 20 Inch ) full extension load capacity 50 kgs, complete all as specified and directed.

Supply & Fixing in repair of fancy type stainless steel handles 100 mm size for kitchen cabinet or wardrobe shutters, complete all as specified and directed.

Supply & Fixing in repair of chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 610 x 508 complete all as specified and directed. mm with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge. , Make; ( Hettich, Ebco, Prime )

Supply & Fixing in repair of chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 610 x 508 mm with necessary fixing clips etc. complete all as specified and directed.

Supply & Fixing in repair of chrome plated stainless steel wire basket (Jar basket) pull out type, size 610 x 508 mm with necessary fixing clips etc. complete all as specified and directed.

Supply & Fixing in repair of chrome plated stainless steel wire basket (Thali basket) pull out type, size 610 x 508 mm with necessary fixing clips etc. complete all as specified and directed.

Supply & Fixing in repair of chrome plated stainless steel wire basket (cutlery basket) pull out type, size 610 x 508 mm with necessary fixing clips etc. complete all as specified and directed.

Supply & Fixing in repair of chrome plated stainless steel wire basket (Drain Trolley) pull out type, size 610 x 508 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and directed.

Supply & Fixing in repair of chrome plated stainless steel wire basket (storage / Plain basket) pull out type, size 610 x 508 mm with necessary fixing clips etc. complete all as specified and directed.

Supply & Fixing in repair of chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 150 to 200 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement bedding (not backing) removal serviceable filed to store and rubbish off premises complete all as specified and directed.

M&L for screed bed or bedding layer of 15 mm thick for laying of floor tiles in CM (1:6) complete all as specified and directed.

M & L for light shade virified ceramic designer pattern tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for non-skid coloured ceramic designer pattern tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and joints in near cement slurry and pointed in white or coloured cement to match.

M&L Glazed Ceramic Coloured designer pattern Tiles, 350X450X7-10 ceramic desiger tiles in any size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

M&L for screed bed or bedding layer of 20 mm thick for laying of floor tiles in CM (1:6) complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M & L for kota stone slab 20-25mm thick in skirting ,dado,riser, steps and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for chequrred cement concrete tiles 20cm x20cm x25mm thick set,jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L glossy finished or rubber moleded Chequered/non slipeble Tiles 400x400X 10-12 mm thick pre printed colour , Set and Jointed in Neat Cement Slurry with Grey Cement and Pigment over and including Screed Bed 15mm thick in Cement Mortar (1:6) as in Path, complete all as specified and as directed.

Rendering 10mm thick in CM 1 : 4 on fair faces of brick work or concrete surfaces finished ever and fair as in backing coat to receive wall finishes complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for 20 mm thick ready mix external sand faced cement plaster using factory manufactured pre mix/ready mix of 'roofy mix' of M/s premier floor to roof materials Pvt. Ltd./ easy plast of M/s Ultratech Cement Ltd/ Soundplast PMC-1 of M/s Sound buildcare Pvt Ltd or other equivalnet approved make having minimum composition of C:S (1:4) using fully treated dry, well graded natural sand conforming to IS 383 with neat cement rendering at all heights and locations in two coats for masonary and concrete surfaces including water proofing compound to the first coat of plaster as per manufacturers specifications(WPC measured and paid seperatly ), racking out joints, hacking of concrete surface, finishing, curing etc as per directions of Engineer-in-Charge.

M&L for 12mm thick ready mix internal plaster of approved make in single coat at all heights and locations surface, watering , finishing, curing, scaffolding etc.complete all as per directions of Engineer-In-Charge.

M&L for plastering 10mm thick ready mix cement plaster on concrete surfaces of ceiling at any height including erection of steel, scaffolding, finished even and smooth without using extra cement complete all as specified and directed.

Dismantling of loose portion of concrete from ceiling and S&F of wiremesh of weight 2.5kg/sqm and apply 25mm average thickness in CM(1:4) mixed with liquid integral WPC (complast 'X' recommended by the manufacturer with guniting machine at a pressure not less than 5kg/sqm finally rendering 10mm thick plaster in CM (1:4) using WPC (Complast 'X' 421 i.e. from M/s Fosroc and nitobound AR from M/S Fosroc or equivalent as approved by GE ) in the proportion recommended by the manufacturer complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M & L for apply a coat of SmartCare Primero with dilution ratio of 1:1 with water maintain a coverage of 100 sq.ft/ltr incl removing all dirt and filling crack surface with smart crack filler on wall complete all as per manufacturer specification.

M&L for preperation of new surface wall/ceilling by scrapping/rubbing,applying two coat of advanced anti-algal weather proof 100% acrylic smooth emulsion with silicon additives,over a coat of fibre reinforced elastomeric liquid water proofing membrane (Asian paint damp proof+ultima suprema,exterior anti fungal paint or equivalent), on new plastered surfaces walls/ceilling and cornires brooming down or steel wire brushing scrapping down with steel scrapper smoke soot moulds moss and efflorescent slats brading oil and greasy spots etc and making proper surface by applying ready mix preparatory wall care putty of Birla wall care or equivalent wherever required complete all as manufacturers instructions. (Manufatured by : Asian paints damp proof + Ultima suprma or Equivalents MAke). Note The Application of paint to be done by the authorised applicators of asian paint or eqlt make and contractor shall submit a written gurantee with the authorized dealer of 8 years for any type of colour fading,peeling,flaking,growth of fungus,seepage of water through the paint applied area or any other damages to the paint). Also the dealer shall appoint a person to inspect and validate the application of the system is stage wise manner.

M&L for preperation of old surface wall/ceilling by scrapping/rubbing,applying,two coat of advanced anti-algal weather proof 100% acrylic smooth emulsion with silicon additives,over a coat of fibre reinforced elastomeric liquid water proofing membrane (Asian paint damp proof+ultima suprema,exterior anti fungal paint or equivalent), on plastered surfaces walls/ceilling and cornires brooming down or steel wire brushing scrapping down with steel scrapper smoke soot moulds moss and efflorescent slats brading oil and greasy spots etc and making proper surface by applying one coat ready mix preparatory wall care putty of Birla wall care or equivalent wherever required complete all as manufacturers instructions. (Manufatured by : Asian paints damp proof + Ultima suprma or Equivalents MAke). Note The Application of paint to be done by the authorised applicators of asian paint or eqlt make and contractor shall submit a written gurantee with the authorized dealer of 8 years for any type of colour fading,peeling,flaking,growth of fungus,seepage of water through the paint applied area or any other damages to the paint). Also the dealer shall appoint a person to inspect and validate the application of the system is stage wise manner.

Material & Labour for applying two coat of oil emulsion distemper on newly surfaces of wall over a coat of primer over 3mm thk wall care putty including preperation complete all as specified and directed.

Complete removal of existance treatment of wall and applying a layer of 3mm thick wall care putty in two coat on wall and applying two coat of oil emulsion distemper including washing floor surface complete all as specified and directed

M&L for 3mm thick putty on newly plastered ceiling and applying two coat of acrylic distemper including prepartion of new plastered ceiling surface complete all as specified and directed.

M & L for applying three coat of white wash on wall including preparation of new plastered surfaces of wall complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 25mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Dismantling water tanks exc 250 n exc 500 ltr. capacity and removing to store complete all as specified and directed.

Dismantling water tanks exc 500 n exc 1000 ltr. capacity and removing to store complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to cutting chases for concealed water tubing , and making good, cutting not exc 10 cm girth in stone, concrete block or slab walls

Supply and Fixing 6 layer white coloured Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted with magnetic float valve as required size and fixed in position all as specified in SSR Part I of capacity 500 Ltrs complete all as specified and directed by Engr-In-Charge

Supply and Fixing 6 layer white coloured Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted with magnetic float valve as required size and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs complete all as specified and directed by Engr-In-Charge

Supplying and laying of 16 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 20 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified. approved by GE.

S & F in repair 15 mm angle/stop valves, fancy type chromium plated screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed.

S & F in repair 15mm, fancy type CP, Pillar taps, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S & F in repair 15mm Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S & F in repair 15mm 2 in one Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S & F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F brass chromium plated shower rose of size 125mm dia fixed with Shower arm 15 mm size, 195mm long with bend of 45degree with flange fixed in repair complete all as specified and directed.

S&F in repair desiger wall mounted or flat for floor Vitreous China wash down water closet pan (pedestal pattern), inclunding attched flush tank having 10 ltr capacity push botton and all acessary fixing complete all as per specified.

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs vitreous china wash basin, white, flat back, size 630x450mm excluding ditto but including brackets including cutting for and pinning in ends of brackets or erecting stand including Supply and fixing of waste pipe complete all as specified and directed.

S & F in repair toilet paper holder chromium plated complete all as specified and directed.

S & F in repair PVC bath cabinet box type with shutter complete. Make Prayag or equavalents approved by GE.

S&F in repair 10 Ltr capacity PVC low level cistern “white” with inlet float valve including bracket with 32 mm dia PVC pipe 600 mm long, complete all as specified and directed.

S & F in repair Health faucet with 1 meter tube and holder, completed.

S & F in repair brass chromium plated towel rail 20 mm outer dia `D’ type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete.

M&L in repair 75mm outer dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

Taking down waste down pipe, rainwater pipe, gutter pipe etc (incl all fittings,heads,shoes bends,swan necks etc including cleaning or refixing or ermoval to store (measured over all as fixed along the centre line over fittings accessories)

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F 110mm bore PVC (SWR) bends With acces door any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends with access door any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Dismantling/taking down existing stone slabs in roof, suspended floors, chajjas and the like hessian base felt or clay tiles or any other water proofing treatment from roof/chajja including PCC and cement plaster, in any thickness cleanint the surface and removing the dismantled debris to a distance exceeding 1.50 Km but not exceeding 5 Km to outside the MD land.

M & L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with and including integral waterproofing chemical PIDIPROOF LW mixed in proportion 200 millilitre per 50 Kg cement of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID) as in padding on roof surface for correcting / making proper slope on roof, surface finished fair and even without using extra cement complete.

M&L for rendering 10 mm thick in CM 1:3 as in roof slab, Chajja drops, roof on brick or concrete surfaces with water proofing compound(WPC measured and paid seperatly ) including roughning surfaces of old concrete by picking, sweeping clean and washing down with water to remove dust etc.

M&L for laying water proofing treatment using 4mm thick APP modified mambrene consisting five layer membrences with features as specified weinghing not less than 3.5 kg/sqm reinforced with oven polyester fiber @ 150gm/sqm laid over a coat of cold applied bituminus primer @ 0.40kg/sqm by torching the membrence and sealing the over lap by 100mm length side 150mm width side all as per manufacturer instructions including joints and changes in direction be curved with cement mortar 1:3 mixed with SBR latex@ 200ml bag of cement curved wel before laying membrece.all as per manufacturer instructions and to the satisfaction of Engr-in -charge.Note : irrespective of lap the net covered area will only be measured for payment. (ii) note : rate is inclusive of APP membrene ,SBRlatex.ii (iii) applying a coat of bituminous aluminium paint @ 200gm/sqm (min) in two coat .

S&F in repair sinks without drainage board made stainless steel 1 mm thick kitchen with plug, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connectiong union to pipe overall size 495 m X 420 mm bowl size 410 mm X 330 mm X 160 mm.

S&F in repair sinks with drainage board made stainless steel 1 mm thick kitchen with plug, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connectiong union to pipe overall size 915 m X 460 mm bowl size 410 mm X 330 mm X 160 mm.

S&F in repair for stainless steel plate rack of minimum size 600mmx900mm and 5mm ss bar etc complete all as specified and directed.

Removing building materials etc.to a distance of 10.00 Km out of Mod Land beyond the lead included in the rates, including loading, unloading and stacking at the destination as directed.

M&L Steel rolling shutters, with out ball bearing, as specified including top cover, an- choring rod, hasp and staple and one shop coat of primer; erected in position as indi- cated, complete: push pull or manual type thickness of lathe 1 mm incl taking down old shutters complete including removal all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated) sheets including ridges as in roof covering complete all as specified and directed.

S&F in repairs Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. Fe-410-W(Gde-E-250) quality-B).

S&F Roof trusses, purlins (Beaming,Tee,Angle,Channel or flat sections) etc including distance pieces,cleats, bolt and nuts etc complete . Fe-410-W(Gde-E-250) quality-B) all as specified and as directed

Material and labour for two coat of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description not otherwise described over 10cm width or girth complete all as specified and directed by Engr-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/chajja( Prepressed to form half circle shape in end portion) , fixed with self tapping screws as specified .

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet curved in shape 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/chajja( Prepressed to form half circle shape in end portion) , fixed with self tapping screws as specified.

Material and labour for one coat of synthetic enamel paint on old painted steel surface of any description not otherwise described over 10cm width or girth including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) nexc 15 cm in thickness above ground level complete all as specified and directed.

M & L 75 mm thick PCC (1 : 2 : 4) type B1 (20mm graded aggregate) Cement concrete as in plinth protection complete all as specified and directed.

Demolition of cement concrete (reinforced) nexc 15 cm in thickness complete all as specified.

M&L for reinforced cement concrete M30 chajjas etc complete all as specified.

M & L formwork to soffits of suspended slabs such as roof slabs , floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping)

M&L for precast cement concrete (1:2:4) type B1(using 20mm graded stone aggrigate ) , in cover slabs of manholes , open drains inclusive of form work set in CM (1:4) complete all as specified.

M&L for TMT bars10 mm and over dia cut to length bent to shape required including bending hooking, binding with MS wire not less than 0.9 mm dia complete all as specified.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed by Engr-In Charge

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron all as specified and directed by Engr-In Charge

Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high for writing of building numbers and the like complete all as specified and directed.

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each all as directed by Engr-In-Charge

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each, all as directed by Engr-In-Charge

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and incl provide hole for gas pipe complete all as specified and as directed.

M&L for rounding to edges of granite stone slabs one edge, such as in steps, cooking platform, and other similar situations (inner side only)

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets, call bells etc and making good disturbed surfaces even and smooth using CM 1:3 to match the existing surface complete.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm and earth continuity conductor with 1.5 sqmm using colour code drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes 1.0 mm thick and modular mounting cover plates with frame of approved colour for mounting modular switches, sockets, fan regulators etc as required for the following:-

(a) One light point controlled by one switch.

(b) One fan point controlled by one switch

(c) One light point controlled by two, two way switches.

(d) One socket outlet 6 amp controlled by one switch on the same board with other switches.

(e) One socket outlet 6 amp controlled by one switch on indepdendent board.

(f) One bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm and earth continuity conductor 2.5 sqmm using colour code drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes 1.0 mm thick and modular mounting plates with frame of approved colour for mounting modular switches, sockets as required for 3 pin 16 amps socket outlet point controlled by one switch.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4 sqmm and earth continuity conductor 4 sqmm using colour code drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes 1.00 mm thick and modular mounting plates with frame of approved colour for mounting modular switches, sockets as required for 3 pin 16 amps socket outlet point controlled by one switch.

S&F modular switch one way 6 amp 1 module.

S&F modular switch one way 16 amp 1 module.

S&F modular switch two way 6 amp 1 module.

S&F modular bell push, 6 amp, 1 module.

S&F door bell, AC, 240 volts, single pole complete.

S&F modular socket 6/16 - 2/3 pin combined 2 module .

S&F modular socket 6 amp 2/3 pin combined 2 module.

S&F ceiling rose 3 plates polycarbonate body complete.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable 2x10 sqmm + 1x10 sqmm earth wire as per colour coding drawing into and including concealed rigid non metallic PVC conduit, size 25 mm medium grade, ISI marked ivory colour along with accessories as required.

S & F in MCCB DB VTPN, 6 way, indoor type ,suitable double door, vertical type including provn for MCCB of upto 160 amps with suitable capacity busbar without MCB complete.

Supply and fix in MCCB of 160 A breaking capacity 16 KA (Icu = Ics), 4 pole, thermally adjustable between 70% to 100% suitable for MCCB DB Vertical type as incoming in the existing DB's complete.

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs, single pole MCB 63A, 240V.

S&F 20 amp, single pole and neutral, socket outlet, with 2 pole and earth, DBOXx MCB protected socket PVC plastic base to protect cement and dust particles with and including one number single pole 'C' series MCB 20 amp as required. (For AC and geyser)

S&F MCB distribution board ETPN, 415 V, 8 way powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs, single pole MCB 6A to 20A, 240V.

S&F RCBO,four pole 63 amp,30mA sensitivity.

M&L for pipe in pipe chemical earthing with GI pipe electrode 3.0 m long having outer pipe dia 50 mm & inner pipe dia 25 mm duly filled with highly conductive and anti corrosive compound of required quantity in ground by digging a bore of 100 mm dia surrounded by soil friendly backfill compound including connection with galvanised earth wire 4 mm dia from earth electrode to the equipment to be earthed duly protected in 15 mm medium grade GI pipe upto 7.5 m, making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with PCC 1:2:4 type B-1, 40 mm thick cover with lifting hook made out of 8 mm dia bar and testing on completion to achieve value not more than 2.0 ohm complete.

S&F in repair for TV co-axial modular socket 1 module.

S&F in repair for telephone socket double RJ-11, 1 module.

S&F in repair Unarmoured RG-11 CO-AXIAL Cable including jointing materials etc laid in trenches or in pipe or fixed on wall complete.

S&F in repairs LED batten 20W with driver aluminium LED batten (4ft) duly prewired connection having minimum system efficiancy of 125 lumens per watt metalic body.

S & F in repairs LED batten 10 watt, metalic body, 100 lumens per watt metalic body.

S&F in repair for rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc 25mm external dia for telephone cable and TV socket complete.

S&F in repair for LED street light fitting of 100 Watts Powder coated pressure die cast aluminium High Power LED as light source with heat resistant toughened glass with lens having IP 65/66 protection complete

S&F in repair for LED Bldg security light fitting of 35 Watts Powder coated pressure die cast aluminium High Power LED as light source with heat resistant toughened glass with lens having IP 65/66 protection complete

S&F in repairs LED bulkhead fitting 10 watt IP 66 & IK 09 with polycarbonate body duly prewired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable complete.

M&L for taking down the existing 4 Nos of 3 phase electric meters, cables from the existing MS box and painting the surface of the MS box with existing colour paint and refixing the same connecting all the meters, DBs etc as required.

Supply,Installation,Testing and commissioning of 1200 mm sweep,BEE 5 star rating Ceiling fan with Silent BLDC motor class of insulation : B, 3 Nos Blades,30 cm long down rod,copper winding, speed of 350 RPM,remote for speed control, insulation resistance more than 2 mega ohm, suitable for 230 V,50 Hz, single phase AC Supply, earthing etc.

S&F in repair fresh air fan plastic body of 200 mm sweep.

Taking down after disconnection Exhaust fan 225 mm dia & depositing in MES store yard.

S&F Electric Straight Line Kitchens Chimney (60cm) with Baffle Filters, Flame Retardent Plastic, Push Button Contol & Air Flow etc.

Disconnecting and taking down ceiling fan 1200 mm dia & depositing in MES store yard.

Taking down and refixing after Painting of water heater 25 Litre with one or more coats of enemal paint of same shade as required

Taking down industrial plug and socket including one number single pole MCB any make, any capacity after disconnecting complete.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

Taking down carefully submain wiring with PVC casing caping / PVC surface conduit and making good disturbed surfaces complete.

S&F in repairs GI bracket pipe of size 40 mm dia medium grade of 1.5 mtr long bent to shape for street light fitting and making the one end of GI pipe bracket suitable for fixing of street light fittings of any type and shall be fixed on wall/pole surfaces by providing suitable and painting to MS clamps and fixing with necessary suitable nuts,bolts & washers complete.

Excavation in trenches not exceeding 1.5 m width and not exc 1.5 in depth getting out hard/dense soil for laying and taking down UG cable.

Excavation in trenches not exceeding 1.5 m width and not exc 1.5 in depth getting out soft / disintegrated rock for laying and taking down UG cable.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated hard/dense soil.

Removal of surplus soil to a distance not exceeding 50 m and depositing.

S&F UG LT cable XLPE insulated armoured heavy duty 1100 volts grade with aluminium conductor multi standarded of size 50 sqmm 3.5 core including centre gland, lugs, jointing materials etc laid in trenches or in pipe or fixed on wall complete.

M&L for Double Wall Corrugated (DWC) HDPE pipe confirming to IS-16205 (Part-24) of 50x38(ODxID) dia Regular size & Orange colour laid in trenches for cable protection complete.

Supply and laying in (replacement of GI water tubing) trench CPVC pipes SDR 11 & plain CPVC SDR 11 fittings of size 50 mm outer dia complete

Supply and laying in (replacement of GI water tubing) trench CPVC pipes SDR 11 & plain CPVC SDR 11 fittings of size 32 mm outer dia complete.

S&F in replacement CPVC gate valve of outer dia 32 mm.

S&F in replacement CPVC ball valve of outer dia 32 mm.

M/s VEEJEE ENTERPRISES (BID ID -3316636)

pk janardhanan (BID ID -3321089)

M/S G.N.POWAR (BID ID -3319910)

M/s J.D. DESAI (BID ID -3326537)