Construction of Galvanized Roofing shed in second floor at Sidhapudur Corporation High school(girls) in Ambika layout in ward no.67, central zone.

Amount

Dismantling the existing damaged Brick or stone in cement mortar walls under 3 mtr height as per the departmental officer etc.,complete.

Dismantling the Exist damaged Weathering Course and Pressed tiles as per the direction of Departmental officers etc. completed.

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification -

Flooring with Ellis pattern using 6mm chips (No sand to be used) including finishing, curing, etc., complete complying with standard specification -as per the departmental officer ..

plastering with cement mortar 1:5 mix 12mm thick in all floor as directed by the departmental Engineers.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Supplying and fixing with Roofing with Galvanised Coruugated Iron Sheet of 0.8mm thickness - 10 m2 including necessary bolt,nuts and bitumen washed etc., completed as per standard specification

Manufacturing supplying and fixing of MILD STEEL Weldmesh frame made out of 40 x 40 x 6 mm M.S angle for outer frame, 35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered wit Weld mesh 7.5 x 2.5cm, 10 gauge size.he frame shall be provided of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.

Painting with first quality emulsion paint two coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Painting with first quality emulsion paint two coats including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Painting with enamel paint new coats with prime coats over base coat for new iron works using good quality and approved colour etc. completed.

Supply and run of 2 of 4 sq mm(56/.3) PVC insulated SC unsheathed Cu.Conductor of 1100 v Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC open light / fan Point (for electronic regulator) (5 points per coil) SD-21

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge pvc pipe on wall and ceiling with MS accessories in flush with wall with 150mm x100mm x 75mm MS switch box with 3mm thick hylum sheet cover for 5A 3pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for open plug point. SD-39

Supply & fixing of single box tpe 4'20W flu fitting complete with copper choke and condenser TW round blocks on wall ceiling with flu tube PVC unsheated copper test from terminals to be fitted etc., complete.

Earthling as per ISI Specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm and with 20mm dia copper earth flat of size 125mm x50mmx6mm, with funneling arrangemen using charcoal, common salt, G.I.reducer, check nuts etc., and masonry work and providing RCC cover slab 38mm thick for the Brick masonry including cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officers (SD 233)

Conveyance of Surplus earth from work site to City outer with average lead of 15 km etc., complete complying with standard specification -as per the departmental officer

EILMECH ENGINEERS (BID ID -1168046)