Balance work of 100 bedded Girls Hostel at City Middle School Doda ( under RMSA)

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:5:10 (1 cement: 5 coarse sand :10 graded stone aggregate 40mm nominal size) Crushed (including all leads, lifts and carriages)

Providing and fixing 60 mm thick inter lock precast tiles cement concrete tile over 50 mm thick crusher dust or dry sand and joints to be filled by crusher dust or dry sand including water complete job.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed (including all leads, lifts and carriages)

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) (including all leads, lifts and carriages)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1:4 ( 1 cement : 4 coarse sand) (including all leads, lifts and carriages)

Excavation in dumped stones or malba including stacking of serviceable and unserviceable material separately and dispbsal of unserviceable material lead upto 50 m and lift upto ·1.5 m, disposed material to be neatly dressed (including all leads, lifts and carriages)

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works. (including all leads, lifts and carriages)

Centring and shuttermg including strutting, propping etc. and removal of form for·

Foundations: footings, bases of columns etc. for mass concrete.

Clearance of drain, cutting of bushes, slush etc by engaging labour (Mazdoor)

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2 (including all leads, lifts and carriages)

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete. Hot finished welded type tubes (including all leads, lifts and carriages)

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1 Osqm

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats)

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend.

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back ,for the reception of pipes and fittings.

Providing and fixing C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg. 15 mm nominal bore of standard back type.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter

Providing and fixing of C.P brass jet

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing toilet paper holder C.P. brass

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45gms.

Providing and fixing of P.V.C flexible waste pipe (coil shaped) with 32 mm dia with length not less than 700 mm pre-waste pipe for sink & wash basin

Providing and fixing C.P brass central hole sink mixer tap with complete accessories as required.

Providing and fixing unplastised P.V.C. connection pipe with PTMT Nuts of approved quality, colour 15 mm nominal bore with 45 cm length

Providing and fixing ball valve (brass) of approved quality complete High or low pressure with plastic floats

15 mm nominal bore

20 mm nominal bore

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete: 10 litre capacity -White

Providing and fixing of C.P cup including all fittings

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality, colour

15 mm nominal size, with dimensions 67x40x40x mm weighing not less than 38gms

20 mm nominal size, with dimensions 69x43x43x mm weighing not less than 45 gms

25mm nominal size, with dimensions 85x51x51x mm weighing not less than 38gms

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 15 mm nominal bore

Providing and fixing G.l. Union in G.l. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing of G.I elbow in G.I pipe including cutting and threading the pipe & making long screw etc.

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing of G.I tee in G.I pipe

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work)

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing of PVC pipe including all fittings whereever required e.g tees, bends, of any degree, etc and jointing as manufacture recommendation etc. including necessary excavation & refilling complete in all respect ( Make supreme, Jindal)

Constructing masonry Chamber 60x60x75 em, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for sluice valve, with C.l. surface box 100 mm top diameter 160 mm bottom diameter and 180 mm deep (inside) with chained lid and R.C.C. top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation, foundation concrete 1 :5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 :3 (1 cement : 3 coarse sand) 12 mm thick· finished with a floating coat of neat cement complete as per standard design. With F.P.S. bricks Crushed. (including all leads, lifts and carriages)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 arked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With F.P.S. bricks

M/S JK GROUP OF CONSTRUCTION

AL KHALIFA GROUP OF CONSTRUCTION

M/S ALEX CONSTRUCTION

M/S SOLDIERS CONSTRUCTION GROUP

Chenab Engineering