PROVN OF CERTAIN REVENUE AND MINOR WORKS FOR ZONE-III AT UMROI MIL STN UNDER GE UMROI

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil and removing surplus soil to a distance not exceeding 50 m and making good surfaces complete all as specified and directed.

Excavation in trenches not exceeding 1.50 m wide and n exc. 1.5 m in depth; for foundation, etc, or for shaft, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Material and labour for 75 mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.

M&L for PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for precast cement concrete block masonry 1:3:6 type C1 (20 mm graded stone aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6 complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil all as specified and directed.

Removing surplus excavated materials (soils) upto a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Material and labour for hard core with broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.

Material and labour for 100 mm thick Plain cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in flooring complete all as specified and as directed.

M&L for providing cement concrete type C2, 1:3:6 (40mm graded stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.

S&F steel work in tubular vertical post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S&F steel work in tubular trusses and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed.

Material & Labour for preparation of new wall surface applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed .

M & L for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M & L for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5m span complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for Mild steel TMT bars 5mm dia. and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, rough finished, flat complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular or polygonal, rough finished complete all as specified and directed.

M & L for use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc. with rough finished surfaces of concrete flat complete all as specified and as directed.

S&F Pressed steel frames for doors of frame size 125x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and directed. Note : Filling of hollow portion of frames with PCC shall be measured and paid separately.

S & F 35mm thick 2nd class hard wood factory made plain framed, panelled shutters (any number of panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces, the size of rails and style as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in flooring finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1, type B-1 using 20 mm graded stone aggregate in surface channels and drains complete all as specified and directed.

Supply and fix aluminium anodised (powder coated) Three track sliding window frame with shutters with ( 2 Nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 4 mm thick plain glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc including aluminium grill of thickness 5mm and opening not exceeding 75mmx75mm etc with the following section of frame and shutter complete all as specified and directed:- (a) Sections for shutter:- (i) 'H' section: 39 x 20 x 1.50 mm thick (ii) 'Interlock' section: 39 x 20 x 1.50 mm thick (iii) 'Edge & Bottom' section: 41 x 20 x 1.50 mm thick (b) Section for frame:- (i) Top & Sides: 92 X 29.50X 1.50mm thick (ii) Bottom: 92 X 29.70 X 1.50mm thick

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed.

S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed.

S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

Material & labour for PCC type B0 1:2:4 (using 12.5mm graded stone aggregate) for fixing hold fasts, angle, etc including necessary form work complete all as specified and directed.

S & F mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) internal surfaces on fair faces of brick work or concrete surfaces, making finished even and smooth without extra cement complete all as specified and directed.

M & L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or on concrete surfaces in two layers (10mm thick 1st layer + 5mm thick finishing layer) finished even and smooth with out using extra cement mixed with liquid water proofing compound (for 5mm thick finishing layer only) 200 ml per 50 kg of cement by weight of cement or as per manufacturer's instruction complete all as specified and directed. Note: Liquid water proofing compound will be measured and paid separately

Supply only liquid waterproofing compound

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 m, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

M&L for prepration of new plastered surfaces and applying two coats of weather proof exterior emulsion paint (Apex Ultima or equivalent) (any colour/tint) with approved colour and pattern over a coat of 1 mm thick wall care putty and a coat of approved alkali primer as on walls of bldgs of any height including necessary scaffolding and safety measures and procedure complete all as specified and directed.

M&L for 75 mm thick cement concrete type C1 1:3:6 using 20 mm graded stone aggregate as in plinth protection finished fair and even with using extra cement complete all as specified and directed.

Material and Labour for Rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250) quality A complete all as specified and as directed.

M&L for Providing and fixing false ceiling of designer tiles (High Pressure steam cured) of 4 mm thickness (as per IS : 14862) of Size 595 X 595 mm and any of the design (Cascade or electra) in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 grams, both side inclusive and black painted groove on all T webs) consisting of Main T runner with suitably spaced joints to get required length and 15 X 32 mm made from 0.30 mm thick sheet 1200 mm long spaced between main "T" at 600 mm C/C to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x20x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc Main "T" runners to be suspended from trusses/ceiling using suitable suspension arrangement as per manufacturers instruction/literature, GI adjustable wire of 4mm dia with galvanized butterfly level clips, spaced at 1200 mm C/C along main "T", bottom exposed width of 15 mm of all "T" sections of 4 mm dia GI wire shall be pre-Painted with polyester paint and black painted groove at centre of Size 4mm depth and 4.5 mm width, all complete at all heights as per direction by Engr-In-Charge.

M&L for preparation of new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and laying of Double wall corrugated, HDPE pipes 150 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C2 for 150 mm bore of pipe complete all as specified and directed.

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube and fix in opening as per specification and drawings complete all as specified and directed.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, etc complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7mm/450 x 350 x 7 mm mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering (backing coat) in CM 1:4 complete all as specified and directed.

Material and labour for coloured non skid ceramics tiles 7 to 8mm thick (square/ rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match the existing floor over and including 15mm thick screed bed/bedding layer in CM 1:4 complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm dia of pipe complete all as specified and directed.

Supply and fixed vitreous china squatting pan, Orissa pattern of size 580 mmx440mm white with P or S trap, front or back inlet and integral foot rest (Excluding flushing cistern and flush pipe) including provision of lean cement concrete bedding (PCC 1:4:8, type D2) complete all as specified and directed.

Supply and fixing aluminium anodised (powder coated) Ventilator frame with Shutter(bottom Half Portion Fixed and top half portion with louver) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 4 mm thick frosted glass to aluminium frame work and louver using rubber gasket and fixed with stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm outside vent with staple and suitable wall angle of size 25.4x25.40x1.1mm thick and fillets with screws and washers etc including Deco Grill of Model / Design No. DG 104 and 6.3mm thick etc. Section for frame shall be 63.5 X 38.1X 1.40mm thick complete all as specified and as directed.

S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed.

S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc. complete all as specified and directed.

S&F 10 litres Capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern & fixing high or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed.

S&F 15mm dia Bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F 15 mm dia pillar tap, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed.

S & F 15mm bore dia Angle Stop valves(Concealed/open) fancy type Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed.

S & F 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, including making good disturbed area/surfaces with cement concrete/cement mortar 1:2:4 etc complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls etc complete all as specified and directed.

S&F wash hand basin, white flat back of size 550 x 400mm excluding pillar taps but including waste coupling, waste pipe and bracket, PVC connection pipe of 15 mm size with PTMT nuts of length 600mm, etc.including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F Brass Chromium Plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Material and labour for 75 mm thick Plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in flooring, path, hard standing, etc. complete all as specified and as directed.

M & L for 20mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles, etc. complete all as specified and directed.

M & L for Chequered cement concrete tiles of size 20 cm x 20 cm x 25 mm thick, set and jointed and pointed in neat cement slurry in floors with mixture of white and grey cement in equal portions and no pigment complete all as specified and directed.

Supply & fixing vitreous china bowl urinal flat back, size (465x355x265) white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement; fixing flushing cistern with brackets, grating and union including PVC connection pipe of 15 mm size with PTMT nuts of length 600mm, etc complete all as specified and directed.

S & F 50mm dia UPVC Pipes (SCH-40) with all fittings for urinal waste and waste line,complete all as specified and as directed.

Supply, hoisting and fixing in position rotational moulded polyethylene water storage tank, 500 litres capacity conforming to IS-12701 (1996) (cylindrical vertical with closed top) including inlet, outlet and wash out holes, all as specified in SSR Part-I, of approved make complete all as specified and directed.

S & F in 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight - 210 gms)

Material & labour for PCC type C1 1:3:6 (20 mm graded stone aggregate) for filling of hollow frame complete all as specified and directed.

Material and labour for point wiring for one light/fan point controlled by one,one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3mm thick complete all as specified and directed.

All as per item No 77 here in before but for one 3 pin 5 Amp socket outlet on independent board.

M&L for point wiring with 2.5 sqmm FRLSH PVC insulated and sheathed multi stranded (FRLSH) flexible copper conductor cable drawn in PVC casing and caping on surface wall, ceiling with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet, cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm copper conductor cable (FRLSH) (multistanded) PVC insulated and unsheathed cable as earth wire to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3mm thick complete all as specified and directed.

Supply and fixing switch piano flush type 240 Volts 5 Amps, SP, one way with white colour complete all as specifed and directed.

Supply and fixing switch socket outlet combination 3 Pin,5 Amps, 240 volts flush type (non shuttered) with white colour complete all as specified/ directed.

Supply and fixing switch socket out let combination multipurpose 3 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) with white colour complete all as specified and directed.

Supply and fixing ceiling rose surface 3Phase/PVC/Polycarbonate, isolated body complete all as specified and directed.

Supply and fix MCB SPN DB 4 way double door,IP 43 protection, glazed door, isolated neutral bar,insulated bus bar assembly,mechanical strength of IK09 complete all as specified and directed.

Supply and fix MCB SPN 40 Amps, 10 Ka, 240 volts complete all as specified and directed.

Supply and fix MCB SP 6 to 20 Amps, 10 Ka, 240 volts complete all as specified and directed.

Supply and fixing Bulb holder angular PVC/Polycarbonate suitable for batten fittings complete all as directed.

Supply and fixing LED Batten fitting 1x18 watts including tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23.0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting complete all as specified and directed.

S&F LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix exhaust fan, metallic body AC single phase, 230V of size 300mm sweep with, blades, frame and louvers complete all as specified and directed by Engr-in-charge.

Material & labour for Sub main wiring with two runs of single core, FRLSH 4 sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi-standed copper conductor cable LT 1100 volts grade drawn through PVC casing capping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 4 sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly complete all as specified and directed. Note : Two run of 4 Sqmm cable, one run of casing capping and one run of 4 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I complete all as specified and directed.

Supply and fixing of LED building security light fittings in aluminium PDC housing, toughened glass cover, individual LEDs with secondary optics, covered with IP66 protection with inbuilt surge protection of minimum 5KV and of capacity 40 W including GI bracket of 40mm pipe all as specified and directed.

M/S D.R enterprise (BID ID -3331367)

N.V.ENGINEERING (BID ID -3331402)

M/s M.L Consortium (BID ID -3330304)

M/S C.M.V CONSTRUCTIONS (BID ID -3331049)

M/s Eddy Constructions (BID ID -3323030)

Lyngdohs Construction Company and Associates (BID ID -3323241)