Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.1 CrAccepted-AOC 858 SECTOR 23 127021 2021R109 | BHIWANI | HARYANA | 127021 | ₹6.1 Cr | 1 | Accepted-AOC Awarded |
| 2 | 2₹6.2 Cr+₹12.2 L (2.00%)Rejected-Finance H NO 1900 SECTOR 3 THANESAR KURUKSHETRA HARYANA 136118 | KURUKSHETRA | HARYANA | 136118 | ₹6.2 Cr+₹12.2 L (2.00%) | 2 | Rejected-Finance Rejected |
| 3 | 3₹6.6 Cr+₹49.8 L (8.18%)Rejected-Finance H NO 657 VPO KHERI MEHAM TEHSIL MEHAM DISTT ROHTAK 124112 | ROHTAK | HARYANA | 124112 | ₹6.6 Cr+₹49.8 L (8.18%) | 3 | Rejected-Finance Rejected |
| 4 | 4₹6.7 Cr+₹64.5 L (10.6%)Rejected-Finance HOUSE NO 1248A HOUSING BORD COLONY SECTOR 15A HISAR 125001 | HISAR | HISAR | HARYANA | 125001 | ₹6.7 Cr+₹64.5 L (10.6%) | 4 | Rejected-Finance Rejected |
| 5 | 5₹6.8 Cr+₹74.3 L (12.2%)Rejected-Finance SCF 55 SECTOR 7 URBAN ESTATE KURUKSHETRA 136118 | KURUKSHETRA | KURUKSHETRA | HARYANA | 136118 | ₹6.8 Cr+₹74.3 L (12.2%) | 5 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | ravi singla engineers and contractors L5 | M/S SHREE BALAJI BUILDERS L1 | D.R.CONSTRUCTION COMPANY L3 | Shri Ganesh Construction Co. L2 | M/S GHANGHAS CONSTRUCTION COMPANY L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00Item Description | ||||||||
| 1.01 | Recovery of Old Steel or Iron Scrap recovered from dismantling | 1,468.91 | Kg. | 28 ₹-41,129 | 15 ₹-22,034 Lowest | 28 ₹-41,129 | 35 ₹-51,412 | 28 ₹-41,129 |
| 1.02 | RECOVERY OF OLD STEEL | 136.02 | Kg. | 28 ₹-3,809 | 20 ₹-2,720 Lowest | 28 ₹-3,809 | 35 ₹-4,761 | 28 ₹-3,809 |
| 1.03 | Providing and fixing concertina coil fencing with punched tape
concertina coil 600 mm dia 10 metre openable length ( total length
90 m), having 50 nos rounds per 6 metre length, upto 3 m height of
wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart
and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with
G.I. staples and G.I. clips to retain horizontal, including necessary
bolts or G.I. barbed wire tied to angle iron, all complete as per direction
of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring
core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm
with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of
M.S. angle, C.C. blocks shall be paid separately)(DSR-16.53) | 364.08 | Per Metre | 210 ₹76,457 | 550 ₹2,00,244 | 250 ₹91,020 | 180 ₹65,534 Lowest | 500 ₹1,82,040 |
| 1.04 | Supply and installation of 20W, 220V, 6500K, LED tube light.
Make: Havells / Philips / Bajaj | 3 | Each | 180 ₹540 | 1,500 ₹4,500 | 150 ₹450 | 140 ₹420 | 100 ₹300 Lowest |
| 1.05 | Supply and installation of 12W, 220V, 6500K, AC round shape LED bulb.
Make: Havells / Philips / Bajaj | 7 | Each | 150 ₹1,050 | 1,200 ₹8,400 | 150 ₹1,050 | 100 ₹700 Lowest | 200 ₹1,400 |
| 1.06 | LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt). Supplying, Installation, Testing and Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency greater than 85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5°C to 50°C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency greater than 85%, THD less than 10% as per IEC 61000-3-2, P. F.greater than or equal to 0.95, IP-66,IK-10, CRI greater than or equal to 70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver and electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) less than 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt output . LM79 and LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 70 Watt. (DSR2025- 8.16.2) | 36 | Each | 2,500 ₹90,000 | 2,500 ₹90,000 | 1,900 ₹68,400 | 1,800 ₹64,800 Lowest | 2,000 ₹72,000 |
| 1.07 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt)
Supplying, installation, Testing and Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency greater than 85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5°C to 50°C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency greater than 85%,THD less than 10% as per IEC 61000-3-2, P. F. greater than or equal to 0.95, IP-66,IK-10, CRI greater than 70, under voltage and over voltage protection, EMI EMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver and electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) less than 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt output . LM79 and LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
72 Watt (DSR2025- 8.13.13) | 26 | Each | 3,000 ₹78,000 | 3,500 ₹91,000 | 1,900 ₹49,400 | 1,850 ₹48,100 Lowest | 2,000 ₹52,000 |
| 1.08 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt)
Supplying, installation, Testing and Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency greater than 85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5°C to 50°C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency greater than 85%,THD less than 10% as per IEC 61000-3-2, P. F. greater than or equal to 0.95, IP-66,IK-10, CRI greater than 70, under voltage and over voltage protection, EMI EMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver and electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) less than 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt output . LM79 and LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
45 Watt (DSR2025- 8.13.11) | 24 | Each | 3,000 ₹72,000 | 4,900 ₹1,17,600 | 2,000 ₹48,000 | 1,850 ₹44,400 Lowest | 2,000 ₹48,000 |
Tender Value
₹6.8 Cr
EMD Value
₹13.7 L
Closing Date
28 May 2026, 2:00 pmClosed
AMIT DUA
District office Hisar
E-Tender for construction of 12525 mt godown (without roofing) E.I. work, C.C Road, boundary wall after dismantling old boundary wall and plinth at Hafed Complex Ghasola (Charkhi Dadri).
2026_HBC_520823_1
202600B5D763 18B3 40BE 90D3 9AEC66F3615358HAF
Open Tender
Civil Works
Works
240 days
GHASOLA
2 documents required · 2 mandatory
₹20,000
₹13.7 L
Yes
4 Aug 2026
11 May 2026
28 May 2026
11 May 2026
28 May 2026
11 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Item Description | |||||
| 1.01 | Recovery of Old Steel or Iron Scrap recovered from dismantling | 1,468.91 | Kg. | 100 | ₹1,46,891 |
| 1.02 | RECOVERY OF OLD STEEL | 136.02 | Kg. | 100 | ₹13,602 |
| 1.03 | Providing and fixing concertina coil fencing with punched tape
concertina coil 600 mm dia 10 metre openable length ( total length
90 m), having 50 nos rounds per 6 metre length, upto 3 m height of
wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart
and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with
G.I. staples and G.I. clips to retain horizontal, including necessary
bolts or G.I. barbed wire tied to angle iron, all complete as per direction
of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring
core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm
with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of
M.S. angle, C.C. blocks shall be paid separately)(DSR-16.53) | 364.08 | Per Metre | 10 | ₹3,640.8 |
| 1.04 | Supply and installation of 20W, 220V, 6500K, LED tube light.
Make: Havells / Philips / Bajaj | 3 | Each | 10 | ₹30 |
| 1.05 | Supply and installation of 12W, 220V, 6500K, AC round shape LED bulb.
Make: Havells / Philips / Bajaj | 7 | Each | 10 | ₹70 |
| 1.06 | LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt). Supplying, Installation, Testing and Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency greater than 85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5°C to 50°C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency greater than 85%, THD less than 10% as per IEC 61000-3-2, P. F.greater than or equal to 0.95, IP-66,IK-10, CRI greater than or equal to 70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver and electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) less than 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt output . LM79 and LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 70 Watt. (DSR2025- 8.16.2) | 36 | Each | 10 | ₹360 |
| 1.07 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt)
Supplying, installation, Testing and Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency greater than 85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5°C to 50°C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency greater than 85%,THD less than 10% as per IEC 61000-3-2, P. F. greater than or equal to 0.95, IP-66,IK-10, CRI greater than 70, under voltage and over voltage protection, EMI EMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver and electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) less than 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt output . LM79 and LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
72 Watt (DSR2025- 8.13.13) | 26 | Each | 10 | ₹260 |
| 1.08 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt)
Supplying, installation, Testing and Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency greater than 85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5°C to 50°C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency greater than 85%,THD less than 10% as per IEC 61000-3-2, P. F. greater than or equal to 0.95, IP-66,IK-10, CRI greater than 70, under voltage and over voltage protection, EMI EMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver and electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) less than 5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy greater than or equal to 120 and less than 135 lm/Watt output . LM79 and LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
45 Watt (DSR2025- 8.13.11) | 24 | Each | 10 | ₹240 |
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.03 MB
BOQ_599722.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .