8231/II/E8

Amount

SCHEDULE 'A' PART-I [ B/R WORKS]

S&F in repairs Bibcock with wall flange and fixed in position including removal of old fittings all as specified and as directed. Make : Jaquar Cat No : FUS - 29037 equivalent in Hindware/Cera/ Parryware as approved by GE

Supply and fixing in repairs pillar cock,fancy type fixed in position including removal of old fittings all as specified and as directed. Make : Jaquar Cat No : FUS - 29001 equivalent in Hindware/Cera/ Parryware as approved by GE

Supply and fix in repairs Brass chromium plated revolving type shower rose 125mm size including fixing to steel pipe or union in repairs complete all as specified and directed.

Supply and fix in repairs waste fittings brass chromium plated 32 mm for sinks/basin etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Supply and fix in repairs waste fittings brass chromium plated 40 mm for sinks/basin etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Supply and fix in repair of PVC valve less syphonic action type flushing cistern 10 ltr capacity low level ,white with inlet, ball valve float and handle including flush pipe 32mm dia & brackets complete all as specified and as directed.

Supply and fixing in repair Angle stop cock,fancy type fixed in position including removal of old fittings all as specified and as directed. Make : Jaquar Cat No : FUS - 29053 equivalent in Hindware/Cera/ Parryware as approved by GE

Supply and Fix in repairs stop valve 15mm dia fancy type chromium plated with long shank and cup (concealed type) all as specified and directed by the Engr-n-charge.

Supply and Fix in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated in repairs complete all as specified and directed.

Supply and Fix in repair Vitreous China bowl Urinal , flat back, size of 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs brass screws pointing around urinal for discharge pipe complete and fixed in repairs complete all as specified and directed.

Supply and fix in repair wash basin vitreous china flat back of size 550x400mm including waste fitting brass chromium plated 32mm with long and fly nut screwed shank, waste chain and plug and porcelain stopper excluding tap but brackets including cutting for and pinning in ends of brackets or erecting stand including waste pipe complete all as specified and directed.

Supply and Fixing in in repair Wash down water closet pan (Pedestal pattern) (European type) white (Excluding flushing cistern and seat cover but including 'P' or 'S' trap and connection to drain or out going pipes and to flush pipes complete all as specified and directed.

Supply and Fix in repair plastic seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460 mm bowl size 410 mm x 330mm x 160 mm including waste pipe as required etc complete all as specified and as directed.

S&F in repairs pvc connection of 15mm dia with brass nuts 450mm long fixed with pipes etc complete all as specified and as directed.

S&F pvc in repairs connection of 15mm dia with brass nuts 600 mm long fixed with pipes etc complete all as specified and as directed.

Supply and fix in repairs Gun metal, globe or gate valve 25 mm dia with iron wheel head Screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs Gun metal, globe or gate valve 20 mm dia with iron wheel head Screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and Fix in repair 1000 Liters Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including dismantling of old one all as specified and complete all as specified and directed.

Supply and Fix in repair 500 Liters Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted & fixed in position including dismantling of old one all as specified and complete all as specified and directed.

S&F in repairs fancy type Hand Shower (health faucet) with 8 mm dia, 1.2 meter long flexible tube & wall hook with N.R.N (Back Flow Preventer) Make: Jaquar cat pt no. ALD 577 equivalent in Hindware/Cera/ Parryware as approved by GE

Taking up or down steel tubing 15mm bore including connections, cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm bore including connections, cleaning for refixing or removal to store complete all as specified and directed.

Supply & Fix in repair of Unplasticised PVC pipes 20 mm dia of pressure rating 10kgf/cm2 with all fittings fixed to walls/ ceilings or in floors etc. any type of pipe complete all as specified and directed.

Supply & Fix in repair of Unplasticised PVC pipes 15 mm dia of pressure rating 10kgf/cm2 with all fittings fixed to walls/ ceilings or in floors etc. any type of pipe complete all as specified and directed.

Supply and Fix in repairs stainless butt hinge 100 mm long (size) medium weight cold rolled fixed to pressed wooden frame with screw, complete all as specified.

Supply and Fix in repairs stainless butt hinge 75 mm long (size) medium weight cold rolled fixed to pressed wooden frame with screw, complete all as specified.

Supply and Fix in repair aluminum anodized barrel tower bolts 200mm size of extruded section complete all as specified and as directed.

Supply and Fix in repair aluminum anodized barrel tower bolts 100mm size of extruded section complete all as specified and as directed.

Supply and fix in repairs aluminum handles Cast type anodized 100 mm size etc complete all as specified and as directed.

Supply and fix in repairs aluminum handles Cast type anodized 150 mm size etc complete all as specified and as directed.

Supply and fix in repairs Aluminum alloy anodized sliding door bolt with hasp, staple (bolt type and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed 250 mm long complete all as specified and as directed.

Supply and fix in repair for plastic Mirror cabinet of size 600 X 400 mm fixed in position using necessary screws complete all as specified and as directed. Make Prayag model: 555 or equivalent in Jaquar/Cera/Hindware as approved by GE

Hacking out old broken glass of any thickness/ sixe of any description form wooden frame fixed with clips and putty, and Supply and fix 3mm thick ordinary Sheet glass fixed with clips and putty completed in squares in not exec 0.5 sq.m in each pane complete all as specified and as directed.

Hacking out old broken glass of any thickness/ sixe of any description form wooden frame fixed with clips and putty, and Supply and fix 4mm thick ordinary Sheet glass fixed with clips and putty completed in squares in exc 0.5 sq.m in each pane complete all as specified and as directed.

Hacking out old broken glass of any thickness/ sixe of any description form wooden frame fixed with clips and putty, and Supply and fix 5.5mm thick ordinary Sheet glass fixed with clips and putty completed in squares in not exc 0.5 sq.m in each pane complete all as specified and as directed.

Hacking out old broken glass of any thickness/ sixe of any description form wooden frame fixed with clips and putty, and Supply and fix 5.5mm thick ordinary Sheet glass fixed with clips and putty completed in squares in exc 0.5 sq.m in each pane complete all as specified and as directed.

Supply and Fix in repair 100 mm long aluminum anodized hasp and staple complete all as specified and as directed.

Taking down existing door/window shutter and resecuring, easing, adjusting and refixing in the same opening, of any description n.exc 1 sqm each complete all as specified and as directed.

Taking down existing door/window shutter and resecuring, easing, adjusting and refixing in the same opening, of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Supply and fix in repairs aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminum wire staples, etc complete all as specified and as directed.

Supply and fix in repairs door closer hydraulically regulated aluminum extruded section, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

Supply and Fix in repair door stopper of aluminum alloy,anodised with hard drawn steel spring of length 150mm complete all as specified and as directed.

Supply and Fix in repair 300mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete and fixed in repairs complete all as specified and directed.

Supply and fix in repairs Mortice lock vertical type, size 100mm of brass 4 Levers complete all as specified and as directed.

Cleaning & removing all scale and dirt, from tanks of capacity exc 500 & not exc 1000 & from mouths of circulating pipes etc., complete all as specified and as directed.

Cleaning & removing all scale and dirt, from tanks of capacity exc 1000 & not exc 2000 & from mouths of circulating pipes etc., complete all as specified and as directed.

Cleaning & removing all scale and dirt, from tanks of capacity exc 250 & not exc 500 & from mouths of circulating pipes etc., complete all as specified and as directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not hacking) removing serviceable tile to stores and rubbish off premises all as specified.

Material and Labor for Vitrified ceramic colored tiles double charged/dark shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 15mm thick in CM 1:6 complete all as specified and as directed.

Material and Labor for vitrified ceramic tiles 10mm thick double charged /dark shade (Square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical surface, over and including provision of cement bedding 10 mm thick in CM 1 : 4 set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed

Material and Labour Non skid ceramic tile 7-8mm thick area exceeding 0.11 Sqm and not exceeding 0.18 Sqm size (Square or rectangular)colour tiles in floor etc, laid over and including Screed bed or bedding layer 15mm thick in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match with as in floors complete all as specified and directed.

Material and Labour Non skid ceramic tile 7-8mm thick joint free area exceeding 0.11 Sqm and not exceeding 0.18 Sqm size (Square or rectangular)colour tiles in vertical surface/skirting etc, laid over and including backing coat of 10mm thick in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match with as in floors complete all as specified and directed.

Material and labour Glazed ceramic tiles exc 350x250x7mm / 450x350x7mm / 300x200x7mm thick coloured tiles in vertical surfaces etc set and jointed in neat cement slurry and pointed in coloured cement to match all as specified.

Material and Labour Non skid ceramic tile 7-8mm thick area exceeding 0.11 Sqm and not exceeding 0.18 Sqm size (Square or rectangular)colour tiles in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with as in floors complete all as specified and directed.

Dismantling boarding, any description, fixed any position with nails including fillets etc complete all as directed.

Supply and fixing of Armstrong Mineral Fibre Acoustical Suspended ceiling system with Fine Fissured (Bevelled TEGULAR) Edge Tiles with Armstrong 15mm exposed GRID. The tiles should have humidity resistance (RH) of 99%, NRC 0.6, Light Reflectance > 85%, Thermal conductivity k = 0.052-0.057w/m K, colour white, Fire Performance UK class 0 / class 1 (BS 476 pt-6&7) in module size of 600 x 600 x 16 mm, suitable for green building application, with recycled content of 31%. The tiles shall be laid on Armstrong superfine 32 with 15 mm wide T section flanges colour white having rotary stitching on all T sections i.e. the main runner, 1200 mm & 600 mm cross tees with a web height of 32 mm and a load carrying capacity of 7.5kg/m2 & minimum pull out strength of 100 kgs. The 'T' section have galvaning of 90grams per M2 and need to be installed with suspension system complete all as specified and as directed.

S&F in repairs 2-way bib cock with wall flange complete all as specified and directed. Make: Jaquar cat pt no. FUS-29041 equivalent in Hindware/Cera/ Parryware as approved by GE

S&F in repairs low density poly ethylene pipe (LDPE) 32mm dia as in waste pipe complete all as specified and directed.

Supply and fixing wall mixer with provision for overhead shower with 115mm long Bend pipe on upper side, connecting legs & wall flanges all as specified and as directed. Make:Jaquar Cat No. FUS-29273UPR equivalent in Hindware/Cera/ Parryware as approved by GE

M & L for greasing and servicing and necessary repair including welding to steel rolling shutters gear/ manual operated type complete all as specified and as directed.

S&F in repairs PVC water tank covers/Lit any type for suitable for 500 and 1000 Liter tanks complete all as specified and as directed.

Checking of joinery (Wooden/Steel/Aluminum) Iron/Aluminum mongery, pelmet box, door springs, rolling shutters etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails seasoning of joinery, door, springs etc, including petty repair material like screws/nails, plug, grease etc to make it functional by attending as a job (Each job contains 5 complaints) complete all as directed.

Checking and attending to water leakage from taps WC”s flushing cistern, urinal wash basins bottle traps etc and any obstruction to water supply in rooms/depts., requiring plumber work and carryout minor repairs such like replacement of washers, tightening of check nuts, tightening of fittings of flushing cistern, cleaning of bottle traps etc including petty materials like washers of all sizes, cotton thread/Teflon tape, pipe clams required size, M-Seal, screws, nails to make it functional and leak proof by attending as a job ((Each job contains 5 complaints) complete all as directed.

Supply and fixing in repairs single liver sink with swinging spout (Table mounted model) with 450 mm long braided hoses fixed in position including removal of old fittings all as specified and as directed. Make : Jaquar Cat No : FUS-29173B equivalent in Hindware/Cera/ Parryware as approved by GE

Supply and fixing in repairs Sink Mixer with Swinging Spout (Table Mounted Model) with 450mm Long Braided Hoses fixed in position including removal of old fittings all as specified and as directed. Make : Jaquar Cat No : SOL-6319B equivalent in Hindware/Cera/ Parryware

Taking down cement plaster of any description on bricks walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 10mm thick on fair faces of brick work or concrete surface of wall even and smooth without using extra cement in CM 1:3 complete all as specified and as directed.

M&L preparation of newly plastered surfaces of wall and applying two coats of Oil bound distemper over a coat of alkaline resistant primer over a coat of 3mm wall care putty, complete all as specified and as directed.

M&L for rendering 15mm thick in (CM 1:4)on fair faces of brick work or concrete surfaces and to be finished even and smooth (without using extra lime or cement) complete all as specified and as directed.

M&L Preparation of new plastered surface on wall and applying Two coats of 100% Premium acrylic emulsion paint in camouflage pattern including priming coat with primer all as specified and as directed .

Material and labour for rendering 10mm thick on fair faces of brick work or concrete surface of ceiling even and smooth without using extra cement in CM 1:3 complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying three coat of white wash on ceiling complete all as specified.

M&L preparation of old wall surfaces and applying one coat of weather proof exterior acrylic paint of camouflage pattern all as specified and as directed .

M&L for Preparation of old painted surfaces by washing, rubbing, brooming down or steel wire brushing or scraping down and applying one coats of Oil bound distemper on walls all as specified.

M&L for Preparation of old painted surfaces by washing, rubbing, brooming down or steel wire brushing or scraping down and applying one coats of White wash on walls all as specified.

M&L for Preparation of old painted surfaces by washing, rubbing, brooming down or steel wire brushing or scraping down and applying one coats of White wash on ceiling all as specified.

M & L applying 3 mm wall care putty on walls all as specified and as directed.

M&L preparation of old decorated wooden surfaces of any description over 10 cm in width of girth and applying one coat on synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted steel surfaces over 10 cm in width of girth and applying one coat on synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old decorated surfaces of wall by washing, rubbing down and stopping of painted surfaces and applying one coat of cement based paint complete all as specified and directed.

M & L Writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30 cm high (per cm of height) complete all as specified and directed.

M&L for removing of plants including roots by dismantling of brick work / PCC / RCC including necessary scaffolding, any type, any location /height ( i.e. roof, parapet walls near pipes etc.) and applying Acid after removing roots for preventing the regrowth and making good the disturbed portion using PCC 1:2:4 Type B-O and plaster in CM 1:3 (size of disturbed portion 150 x 150 x 150mm) complete all as specified & directed by Engr- in -Charge.

Demolition of brick work or stone / boulder masonry, built in cement or lime mortar including all quoins, arches, pillars, etc but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 all as specified and as directed.

Material and labour for newly plastered surfaces of wall etc by washing rubbing down and scraping down surfaces and applying two coat of oil bound distemper over a coat of alkaline resistant primer complete all as specified and directed.

SCHEDULE 'A' PART-II [ SEWAGE WORKS]

Checking and attending to sewage line / manhole/septic tank blockage / leakage by clearing of drains of dia not exceeding 150 mm including blocked manholes / Nahani traps/gully traps/was by ridding from manholes and well flushing after cleaning and removal of blocked/decomposed sludge/dirt and other material not exc 50 m and burning the same including removing and re fixing manhole covers without damaging complete by attending as a job ((Each job contains 5 complaints). .

Cleaning of septic tank bailing out fluid, decomposed materials sludge etc, scrapping and washing the wall with fresh water and disposal of decomposed materials, sludge etc out side MD land completed all as directed by Engr-in-charge for the following septic tanks :-

(a) 100 users septic tank

(b) 50 user septic tank

(c) 25 User septic tank

(d) 10 Users septic tank

Excavation in trenches, not exceeding 1.5 M wide, and not exceeding 1.5 M in depth for foundation etc and getting out in hard / dense soil all as specified

Returning filling in trenches including spreading leveling watering and well ramming in layers not exc 25cms in soil as specified and directed Engr-in-Charge

Removing excavated material/soil to a distance not exc 250 mtr but n exc 500 m away and deposing where as directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed by Engr-in-charge

Demolition and breaking up SWG drain pipe of 150mm dia set in cement concrete as in trenches as directed by Engr-in-charge Note: Excavation and RFR will measured and paid separately.

M&L for Plain cement concrete 1:3:6 type C2 (using 40mm graded granite stone aggregate) as in concrete bed to drain pipes for 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L 150 mm dia HDPE Pipes PN 10 including laying in trenches with all necessary fittings as specified and as directed by Engr-in-Charge

Demolition of Plain cement Concrete of any description and in any position not otherwise specifically provided for all as specified and as directed.

M&L for Plain cement concrete 1:3:6 type C2 (using 40mm graded granite stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size straight or curved on plan exc 6m mean radius built in CM (1:4) all as specified.

M&L rendering 15mm thick plastering on fair faces of concrete surface in CM 1:4 with water proofing compound @ 2% by weight of cement even and fair surface complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately.

M&L Plain cement concrete 1:2:4 type B1 (using 20mm graded granite stone aggregate) as in benching to manholes, coping etc.. including necessary formworks complete all as specified and directed.

M&L for PCC (1:2:4), type B1 in surface channel & drains incl necessary form work complete all as specified & directed.

Demolition of cement concrete reinforced cover slabs of man holes etc n.exc 15 cm thick all as specified & directed.

M&L for Precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in manhole/ gully trap cover slab set in cement mortar 1:4 including necessary form work all as specified and directed.

M&L for TMT bars 10mm and over cut to length, bend to shape required incl cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Taking down Securing glass in repairs of any description in concrete surfaces to match existing work (New length of resurfaced shall be measured) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including all quoins,arches,pillars, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

M&L for preparation of new plastered wall surface and applying two coat of cement base paint over a coat of primer complete all as specified.

M&L for preparation of old plastered wall surface and applying one coat of cement base paint complete all as specified.

M&L for preparing Old steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified

SCHEDULE 'A' PART-III [ E/M WORKS]

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc.

M & L for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable FRLS-H 1100 volts grade single core drawn into and including non-metallic rigid PVC conduit of 20 mm dia/ PVC Casing capping along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated FRLS-H 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof with and including 1.6 mm thick MS sheet fabricated terminal boxes flush mounted for mounting the switches, sockets, fan regulator etc as required with 3mm thick laminated hylum sheet top cover all as specified and directed for :-

(a) One light point controlled by one switch

(b) One fan point controlled by one regulator / switch.

(c)One 3 pin socket outlet 5 amps socket on independent board

(d) One 3 pin socket outlet 5 amps socket on Same Board

(e) One light point controlled by two Nos of two way switches.

(f) One bell/buzzer point controlled by one push button

All description as per item No. 114 here-in-before but with 4 sqmm cable for one 3 pin socket outlet 15 Amps on independent board with 4 sqmm cable as earthling conductor.

Supply and fix in replacement switch piano flush type single pole one way 5 A 240 Volts complete all as specified and as directed including taking down old unserviceable switches.

Supply and fix in replacement switch flush type single pole two way 5 A 240 Volts complete all as specified and as directed.

S&F in replacement Socket outlet 2 in 1, 3 pin, 5A complete all as specified and as directed.

Supply and fix in replacement switch Socket combination 2 in 1, 5 Amps Flush type 240 Volts complete all as specified and as directed.

Supply and fix in replacement switch Socket combination 5 Amps / 16 amps, 5 in 1 flush type 240 Volts complete all as specified and as directed.

Supply and fix in replacement ceiling rose 3 ways PVC / Polycarbonate, isolated body complete all as specified and as directed.

Supply and fix in replacement Call bell, ding-dong, suitable for working on 230 volts AC supply, single pole, complete all as specified and as directed.

Supply and fix in replacement Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.

Supply and fix in replacement Bell push flush type 5 A 240 Volts complete all as specified and as directed.

S/ F in replacement Modular switch 1 way 5A, 1 Module including taking down old unserviceable switch and removing the material for taking credit complete all as specified and as directed.

S / F in replacement Modular switch 1 way 16A, 1 Module including taking down old unserviceable switch and removing the material for taking credit complete all as specified and as directed.

S/ F in replacement Modular bell push ,5 A, 1 Module including taking down old unserviceable bell push and removing the material for taking credit complete all as specified and as directed.

S / F in replacement Modular Socket 5A-2/3 pin combined 2 Module. including taking down old unserviceable socket and removing the material for taking credit complete all as specified and as directed.

S / F in replacement Modular Socket 5A / 15A - 2 / 3 pin combined 2 Module. including taking down old unserviceable socket and removing the material for taking credit complete all as specified and directed complete all as specified and as directed.

S/F in replacement Modular fan regulator step type , 2 Module including taking down old unserviceable fan regulator and removing the material for taking credit complete all as specified and as directed.

Supply and fix in replacement 3mm thick laminated sheet top cover on switch boards including cutting, fixing and screwing etc including taking down old unserviceable hylum sheet, removing the material for taking credit and making good the disturbed surface of wall complete all as specified and directed.

Taking down carefully old unserviceable sub main wiring with aluminum /copper conductor cable 4/6 Sqmm in PVC conduit complete removing the materials and taken as credit and making good the disturbed surface of wall / floor etc.

Sub main wiring with two run single core 4 sqmm multi stranded copper conductor FRLS-H PVC insulated unsheathed cable 1100 volts grade and one run of 4 sq mm multi stranded copper conductor FRLS-H cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 20 mm dia/PVC casing capping 20 mm including conduit accessories all as specified and directed. Note: Three runs of 4 Sqmm cable and one run of 20mmconduit / casing capping will be measured as one unit length.

Sub main wiring with two run single core 6 sqmm multi stranded copper conductor FRLS-H PVC insulated unsheathed cable 1100 volts grade and one run of 6 sq mm multi stranded copper conductor FRLS-H cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 32 mm dia/PVC casing capping 25 mm including conduit accessories all as specified and directed. Note: Three runs of 6 Sqmm cable and one run of 25 mm conduit / casing capping will be measured as one unit length.

Sub main wiring with four runs single core 4 sqmm multi stranded copper conductor FRLS-H PVC insulated unsheathed cable 1100 volts grade and two runs of 4 sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit, 25 mm dia/PVC casing capping 25 mm and conduit accessories concealed/surface of wall/roof/ceiling etc complete all as specified and directed. Note: Four runs of 4sqmm and two runs of 4 sqmm cable and one run of 25mm dia conduit/casing capping shall be measured as one unit length.

Sub main wiring with four runs single core 6 sqmm multi stranded copper conductor FRLS-H PVC insulated unsheathed cable 1100 volts grade and one run of 6 sqmm multi stranded copper conductor cable as earth continuity conductor drawn into and including non-metallic rigid PVC conduit 32 mm dia/PVC casing capping 32 mm including conduit accessories all as specified and directed. Note: five runs of 6 Sqmm cable and one run of 32 mm conduit / casing capping will be measured as one unit length.

Supply and fix in replacement Sheet metal enclosures with socket plug top and MCB SPN 20A, 240 volts, with a two pin and earth plug socket complete with one single MCB 20 Amps, 240 volts (for AC ) including taking down old unserviceable old unserviceable Sheet metal enclosures with socket plug top complete all as specified and directed.

Supply and fix in replacement sheet metal enclosure powder coated double door for Distribution Board, SPN 4 way DB ,240 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed.

Supply and fix in replacement sheet metal enclosure powder coated double door for Distribution Board, SPN 8 way DB with 200 A bus bar ,240 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed.

Supply and fix in replacement sheet metal enclosure powder coated double door for Distribution Board, TPN 4 way DB ,415 V with detachable Gland Plate, Box Insertion Marks ,Circuit Identification Label ,Neutral Link ,Earth Link , Tin Plated Copper Bus Bar including , Disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed.

Supply and fix in replacement sheet metal enclosure powder coated double door for Distribution Board, VTPN 4 way DB with Degree of Protection IP 54 including , Disconnecting electric connections, dismantling from position unserviceable DBs for taking into credit complete all as specified and as directed.

Supply and fix in replacement MCB SP 5 A to 32 A , B curve, 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix in replacement MCB SP 40 Amps , B curve 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix in replacement MCB SPN 32 Amps , C curve 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix in replacement MCB SPN 40 A- 63Amps , C curve 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix in replacement MCB TP 25A - 63 A , B curve 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix in replacement MCB TPN 16 A- 32 Amps , B curve 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

Supply and fix in replacement MCB TPN 40A- 100 A , B curve 10 kA including , Disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit complete all as specified and as directed.

M & L for earthing complete with galvanized steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanized steel earth wire 4mm dia as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 connected to earthing test point, including 20 mm GI pipe (Medium grade) for watering and 40 mm GI pipe (Medium grade) for protection of earth strip and etc.. including testing on completion ,PCC chambers in PCC1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wire mesh ,funnel, lugs and charcoal, salt etc all as applicable including taking down old unserviceable earthing complete for taking into credit complete all as specified and as directed by the Engineer-in-Charge Note:-(i) The rates quoted is inclusive of 4mm dia GI wire earth conductor and protection pipe upto a length of 7.5m from the earth pit.

Supply and lay earth continuity conductor or main earthing lead fixed to wall on batten or recess or buried in ground or drawn in conduit / conduit pipe or fixed to poles or any other indicted situation for loop earthing etc of galvanised steel earth wire 4mm dia including taking down old unserviceable GI earth wire complete all as specified and as directed.

Supply and fix in replacement MCCB 4 pole 415 volts , 100 Amps, with rupturing capacity 16 KA complete all as specified and as directed including taking down old unserviceable MCCB for taking into credit complete all as specified and as directed by the Engineer-in-Charge .

Supply and fix in replacement MCCB four pole 415 volts 50 Hz , 125 amps, with rupturing capacity 16 KA complete all as specified and as directed including taking down old unserviceable MCCB for taking into credit complete all as specified and as directed by the Engineer-in-Charge . .

Material and labour for Painting the DB Boxes as required at site after scraping out completely the old paint with one coat of red oxide primer and two coats of synthetic enamel paint including carrying out minor welding works if required as directed by the Engineer in charge NOTE: Colour of paint shall be decided by the Engineer-in-charge.

Supply and fix in replacement ON Load Change over switch 415V in sheet metal enclosures 4 pole 160 Amps including taking down old unserviceable on load change over switch for taking into credit.

Material and labour for Writing letters (Block. Roman, Italic or Indian) with thick paint ,stand out boldly and solidly without showing signs of brush marks, or by Stickering , upto 10 cm height and painting with contrasting colour in the background of letter complete as directed. NOTE:Colour of paint/ Stickering shall be decided by the Engg-in-charge.

Demolition of Cement concrete (unreinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge.

M & L for 85 mm thick cement concrete 1:2:4 type B-1, using 20mm graded aggregate for making good the disturbed road surface after laying of pipe line over returned filled and compacted earth surface to match with existing road level complete all as specified and as directed.

Supply and fix in replacement LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. and taking down old U/S fittings for taking into credit complete all as specified and directed Make : Philips

S & F LED light fitting in replacement 1x9W/1X10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed including taking down old U/S fittings for taking into credit.

Supply and fix in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old U/S fittings for taking into credit.

Supply and fix in replacement LED luminaries 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking down old U/S fittings for taking into credit .

Supply and fix in replacement round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fix in replacements Electronic Ballast 36 watts /40Watts including taking down old unserviceable ballast and removing the material for taking credit complete all as specified and as directed.

Supply and fix in replacements Electronic Ballast 28 Watts including taking down old unserviceable ballast and removing the material for taking credit complete all as specified and as directed.

Taking down carefully unserviceable ceiling fans of any size from its position, dismantling blades, taking the fan motor to electrical replacement shop and bringing back the fan motor after making it serviceable & testing and hanging the ceiling fan in its position after fixing the removed blades properly and making necessary connections to ceiling rose complete all as specified and directed. Note:- Replacement of unserviceable spare parts shall be measured and paid separately under respective items of this schedule here-in-after.

Description all as per Sl item No 166 but for exhaust fan of any size/model.

Material for replacing Bearing Heavy Duty double ball bearing set (2 nos) with tolerance, Hardened Carbon Steel Balls with protective seal lubricated with high quality grease for smooth running for Ceiling fan complete all as specified and as directed.

Material for replacing Bearing Heavy Duty double ball bearings/bush bearing set (02 nos) with tolerance, Hardened Carbon Steel Balls with protective seal lubricated with high quality grease for smooth running for exhaust fan complete all as specified and as directed.

Material for replacing condenser 2.5 mfd for Ceiling fan, oil type complete all as specified and as directed.

Material for replacing condenser 2.5 to 4 mfd for exhaust fan, oil type complete all as specified and as directed.

Material for removing the burnt winding of ceiling fan of any size, cleaning the slot, rewinding with super enameled copper wire of suitable size, varnishing heating and insulating complete all as specified and directed by Engr-in-charge.

All as per Item No. 172, but exhaust fan of size 300mm sweep.

All as per Item No. 172, but exhaust fan of size 450mm sweep.

Material for replacing shaft of ceiling fan complete all as specified and directed by Engr-in-charge.

All as per Item No. 175, but exhaust fan of size 300mm sweep.

All as per Item No. 175, but exhaust fan of size 450mm sweep.

Material for replacing shackle accessories to hold with fan hook complete with rubber bush, bolt, nut, split pin complete all as specified and directed.

Supply and fix in replacement canopy suitable for ceiling fans of size 48"/56" all as per existing type and model & Colour of fan at site including dismantling the old ones complete all as specified and directed.

Material for replacing condenser holder/clamp PVC or metal for fixing capacitor/condenser complete all as specified and directed.

Material for painting of ceiling fan/exhaust fan of any size/make/model complete in site with synthetic enamel paint of approved colour by brush including filling cavities with fillers, one coat of after cleaning dust and rewriting the fan number etc all as directed.

Material for replacing fan blade set high quality for 1200 mm sweep fan with fixing screws.

Material for replacing fan blade set made of aluminum for 300 mm sweep exhaust fan with fixing screws.

Material for replacing fan blade set made of aluminum for 450 mm sweep exhaust fan with fixing screws.

Supply and fix in replacement louvers/mesh for exhaust fan of any size including taking down old unserviceable louvers and removing the material for taking credit complete all as specified and directed.

M & L dismantling taking out of unserviceable geyser of any capacity/make/model, transporting to the workshop for complete over-hauling, testing of copper container, rectifying the defects including replacement of glass wool/insulating material of existing quality and returning to the site at INS Parundu, refixing and connecting up with the water connection and testing including replacement of following parts :- Note :- Replacement of spares will be measured and paid for separately under respective items of the schedule here-in-after as supply only.

Removing the door assembly and the deposits to be removed by scraping or cleaning the element with diluted Hydrochloric acid and flush out sediments deposited in the tank.

Supply only in replacement glass lined Incoloy 800 heating element of capacity 2 KW with rubber gasket complete all as specified and directed.

Supply only in replacement capillary type high precision thermostat (2 nos) preferably with highest safety VDE mark suitable for storage type water heater complete all as specified and directed.

Supply only in replacement non-self resetting capillary thermal cutout preferably with highest safety VDE mark suitable for storage type water heater complete all as specified and directed.

Supply only in replacement Steel (SS) braided ,Flexible Hoses (2 nos) having a minimum pressure rating of 8 bar and compatible for hot water applications including making end connections for water inlet/ outlet from/to water heater or to the discharge line complete all as specified and as directed.

Supply only in replacement Anode rod made of aluminium / magnesium .

Supply only in replacement Temperature control knob

Supply only in replacement Heating indicator lamp and power indicator lamp

Supply only in replacement drain valve.

Supply only in replacement geyser tank of capacity 25 Ltrs made out of heavy gauge stainless steel with glass enamel coating or coated complete all as specified and directed.

Supply only in replacement multifunction safety relief valve/pressure relief valve suitable for geyser complete all as specified and directed.

Supply only in replacement brass Non return valve 15 mm/20 mm dia suitable for geyser complete all as specified and directed.

Supply only in replacement Apparatus plate assembly suitable to fix thermostat, heating elements as of geyser and nuts etc complete all as specified and directed.

Supply only in replacement brass Fusible plug

Material for Painting of water heater (Geyser) up to 25 Ltr capacity with synthetic enamel paint of approved colour over a coat of red oxide after removing of old paint by scratching and filling of cavities with fillers.

Supply only in replacement 3 core 4.0 Sqmm copper conductor cable suitable for geysers of any size complete all as specified and directed.

Supply and fix in replacement 3 pin plug top suitable for metal socket of capacity 25 Amps complete all as specified and directed.

M & L for removing the tank from the geyser, brazing to arrest the leakage, reassembling and refixing complete all as specified and directed.

Supply only in replacement Bottom inspection chamber cover suitable for 25 Ltrs capacity geyser of any make/model complete all as specified and directed.

SAI ENGINEERING WORKS

VVM CONSTRUCTIONS

AnnaiEnterprises