Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.4 LAccepted-AOC NO 1505 SHIV MANDIR DELHI GATE NAJAFGARH NEW DELHI 110043 | WEST | DELHI | 110043 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹21.5 L+₹86,372 (4.19%)Rejected-Finance | L2 | Rejected-Finance BIDDER NOT LOWEST | |
| 3 | L3₹22.7 L+₹2.1 L (10.3%)Rejected-Finance | L3 | Rejected-Finance BIDDER NOT LOWEST | |
| 4 | L4₹24.9 L+₹4.3 L (21.1%)Rejected-Finance | L4 | Rejected-Finance BIDDER NOT LOWEST | |
| 5 | L5₹25.5 L+₹5.0 L (24.1%)Rejected-Finance | L5 | Rejected-Finance BIDDER NOT LOWEST |
Tender Value
₹25.0 L
EMD Value
₹49,980
Closing Date
11 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST DELHI CANTT
GE WEST DELHI CANTT
ADDN ALTN TO BLDG NO P20 OR COOK HOUSE IN HQ TG EME AND ADDN ALTN TO BLDG NO P 33 34 35 AT HQ TG EME UNDER AGE BR III OF GE WEST DELHI CANTT
2023_MES_585975_1
GE/DW-82/2022-23
Open Tender
Civil Works
Item Rate
180 days
DELHI CANTT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE WEST DELHI CANTT
₹49,980
19 May 2023
16 Mar 2023
13 Apr 2023
16 Mar 2023
11 Apr 2023
30 Mar 2023
Amount
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in har/dense soil complete all as specified and directed.
Returning filling in, including spreading leveling, watering and well ramming in layers n. exc. 25 cm in soft/loose soil, complete all as specified and directed.
Earth filling under floors or in foundation including watering and consolidation well ramming including sporeading and levelling n.exc 25cm thick complete all as specified and directed. Note : Earth to be filled shall be obtained from item No. 1.00 above.
Removing excavated soils beyond MOD land and depositing where directed complete all as specified and directed.
M&L for cement conc 1:3:6 type C-2 using 40mm graded stone agg as in sub base to floor/ filling mass conc. well compacted all as spd.
M&L for cement conc 1:4:8 type D-2 using 40mm graded stone agg as in sub base to floor/ filling mass conc. well compacted all as spd.
M&L for Hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface
Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc including removal of debris beyond MOD land complete all as sfd and directed.
Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6m mean radius complete all as specified and directed.
M & L for Nominal Mix reinforce concrete type B-1 1:2:4 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.
S&F TMT bars 6mm to 8mm dia , cut to lenght, bent to shape required, including cranking, bending spirally for hooping for coloums, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as specified and directed.
All as per Srl item No. here-in-before above but TMT bars 6 mm and over upto and including 8mm as in stirrups, spacers and binders.
M&L for Brick work with Sub class 'B' bricks straight or curved on plan to any radious in half brick thick walls, built in Cement mortar 1:4 complete all as specified and directed.
M&L for 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork In cement concrete 1:2:4, type B-0 complete in all respect as specified.
M&L for 15 mm thick ready mix plaster of CM on fair faces of brick work or concrete surfaces finished surface even and fair without using extra cement complete all as specified and directed.
M&L for applying layer of white wall care putty of thickness not less than 1mm for finishing the surface even to true aligned surface and smooth using sand papers etc all as specified and directed by Engineer-in-charge.
M&L for applying two coats of oil bound distemper (approved quality & tint) using painting rollers over a coat of alkali resistance primer on walls on prepared surfaces under items here-in-before complete all as specified and directed.
Taking down washed stone grit plaster and making good finish to receive new plaster and removal of rubbish beyond MOD land complete all as specified.
M&L rendering Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
S&F powder coated Anodised aluminium ventilator shutters, top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) including provision of louvers and space for exhaust fans all as specified and directed.
S&F powder coated anodised aluminium frame for windows, ventilators, grill with one or more rebates including necessary joining cleat, powder coated aluminium snap beading, screws for fixing etc. complete all as spd & directed. Note: (1) Only aluminium items to be measured. (2) Minimum thickness of powder coating to be 50 micron.
S&F aluminium anodised powder coated sliding window comprising of sliding runner of two/three way aluminium frame section (weight not less than 0.65 Kg/RM) as per series-B, consisting of two sliding shutters made out of section (weight not less than 0.4 Kg/RM) with 4 mm thick glass fixed with rubber and aluminium beading including down push type locking arrangement in glass shutter, fixed the frame with rawl plug complete all as specified and directed. Note :- (1) Glass to be measured & paid separately. (2) Minimum thickness of powder coating to be 50 micron.
S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed
S&F powder coated Anodised aluminium door shutters including 5 mm thick plain sheet glass aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples (for windows and gauzed doors) all as specified and directed
S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F 4mm thick figured glass/ pin head type and glazing in squares not exc 0.5 Sqn in each pane complete all as specified and directed.
S & F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. .
S&F Pre-painted galvalume aluminium zinc coating (min thickness 50 micron) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. Sheet shall be packed with the wall throughout the length with brickwork or PCC coping, complete all as specified and directed.
S&F 150 mm dia 1 mm thick Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edgesall as specified and directed.
S&F false ceiling of grid of galvanzed steel tee/ angle (powder coated ) of grid size 600x600mm, as directed comprising of main tee ( weight not less than240gm /RM) and angle (weight of section not less than 217gm/RM) all around of walls suspended of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels insert of any type, including ceiiling boards of size 595x595x16 mm thick mineral fibers board deisgner tiles of approved firm fixed in position complete all as specified and directed.
S&F PVC false ceiling of grid of galvanzed steel tee/ angle (powder coated ) of grid size 600x600mm, 5 mm thick plain embossed PVC sheet of density 600kg/cum as directed comprising of main tee ( weight not less than240gm /RM) and angle (weight of section not less than 217gm/RM) all around of walls suspended of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels insert of any type, including ceiiling boards of PVC designer tiles of approved firm fixed in position complete all as specified and directed.
S&F power coated Anodised aluminium frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. Note:- Minimum thickness of powder coating to be 50 micron.
M&L form work to soffits of suspended slab such as roof slabs, balconies, floor slabs, cover slab, shelves, landings and similar work including beams, not exc. 200mm thickness finished rough (horizontal or sloping) as specified and directed.
M&L form work to sides & soffits of floor or roof beams, haunchings, griders bressummers lintels, cantilevers shelves including sup-ports, overhangs, etc also splays between floors and beams etc, complete all as specified and directed.
M&L for Providing precast RCC lintel in window or door cills, lintels, bressumers, steps,quoin blocks (for use with masonry),string courses, copings.kneelers, apex stones, pier caps,columns, posts,boundary pillars,bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match as directed
M&L for providing cement concrete type B1 1:2:4 (using 20 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and directed
M&L for Internal rendering 15 mm thick in cm 1:4 on fair faces of block masonry /brick work surfaces finished even and smooth without using extra cement including integral water proofing compound @ 2% by weight of cement, complete all as specified and directed. rate of WPC shall be deemed to be included in quoted rate.
M&L for External rendering 15 mm thick in cm 1:4 on fair faces of block masonry /brick work surfaces finished even and smooth without using extra cement, complete all as specified and directed.
M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) n. less than 0.9mm dia complete all as specified and directed.
M & L Cement concrete in surface channel and drains in type C2 1:3:6 (40 MM graded crushed stone aggregate) in manholes complete all as specified and directed by Engr-in-charge.
M&L for 150 mm dia reinforced concrete pipes, class NP2, laid and jointed with collars complete all as specified and directed.
M&L for 150 mm dia cement concrete type C2 1:3:6 as in Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed.
Cutting into existing manholes, for 150mm dia pipe, for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and fair at top using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight all as directed at site complete all as specified and directed.
S&F Stainless steel curtain rail 20 to 25 mm dia coloured with pair of suitable brackets,finnels and also making good the wall surface to match the existing surfaces complete all as specified and directed.
S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm
S&F long body Bib taps, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete in all respect as specified.
S&F grating doom 100 mm dia of CP with or with out hole (minimum weight 25gms).
S&F PVC connetion of size 15x600 mm with PTMT nuts.
S&F Brass CP wall mixer for mixing hot & cold water with telephonic shower screwed down for iron pipe and fixed screwed down,screwed for iron pipe or for brass ferrule and fixed all as specified.
S&F chromium plated brass overhead shower rose 125 mm dia, with revolving joint fixed to 15mm pipe, complete all as specified and directed.
S&F Two way angle valve, fancy type chromium plated cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete in all respect as specified.
S&F Health Faucet mild steel chromium plated suitable for 15 mm dai pipe with 1.25 mtr long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified.
S&F 15 mm bore angle valve, cast copper alloy screwed down high pressure with capstain head with long shank & cup complete of.
M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified & directed.
Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass and plain fittingscomplete all as specified and directed.
Supplying and laying of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass and plain fittings complete all as specified and directed.
S&F 1000 ltr capacity rotational moulded polythene water tank hoisted & fixed in position incl pvc float valve 20mm dia including dismantling old PVC water tank complete all as specified and directed.
S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls complete all as directed.
S&F110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as directed.
S&F for PVC (SWR) floor trap of 100mm dia,plain with grating including jointing with solvent cement.
S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement.
S&F PVC (SWR) vent cowl of 115 mm dia.
S&F grating doom 100 mm dia of CP (minimum weight 25gms.
S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls complete all as specified and directed.
S&F 110mm PVC (SWR) bends any radius complete all as specified & directed.
S&F vitreous china wash down water closet pan (excluding flushing cistern but including PVC flush pipe 32 mm dia and pvc seat cover white).
S&F counter top vitreous china wash hand basin, oval shape excluding taps, waste pipe chain and plug and porcelain but including, waste coupling complete all as specified and directed.
S&F flushing cistern 10ltr capacity syphonic action type low clevel with inlet ball valve ,float valve and handle including bracket,flushing pipe etc. complete all as directed.
Complete removal of existing treatment of wall/Ceiling using wire brush/mechanical/ electrical driven sanders, washing, rubbing down and stoping of painted surface including preparation of surface etc all as specified and directed
Taking down cement plaster from stone/brick walls including racking out joints for keys and scrubbing down with water etc, complete all as specified and directed.
M&L preparation of old painted of wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted to steel and iron surfaces of any description over 10 cm width or girth not other wise described and applying two coat of synthetic enamel paint including easening of steel window by providing lubricant oil to hinges/pivot complete all as specified and directed.
M & L for Vitrified tiles (any shade) 9 mm to 10mm thick (square/rectangular) polished, area of each tile (600mmx600mm) , in floors/Skirting etc set & jointed in neat cement slurry and pointed in coloured cement grout to match including 15mm thick CM (1:4) screed bed or backing coat incl dismantling of old exisitng tiles or flooring of any description all as specified.
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 15 mm thick screed bed in CM 1:4. complete all as directed.
M&L for glazed ceramic coloured tiles (350x250x7mm/450x350x7mm ) thick on vertical surfaces such as skirting and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in C:M 1:4 rough to receive tiles.
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including chamfering of granite complete all as directed.
M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete in cement mortar 1:4. complete in all respect as specified.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations
M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spd & directed.
kota stone grinding and polishing with bees wax making glazed finish jointed with grey cement slurry complete all as specified and directed.
S&F CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed screwed down , screwed for iron pipe or for brass ferrule and fixed all as specified.
M&L for glossy finish reflective type Chequered cement concrete tiles 30cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigment on screed bed 15 mm thick in CM 1:4 complete all as specified.
S&F Framed work as in doors or gates of angle or other section with gusset plates, MS guard bars, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
S&F factory made solid Panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified.
Taking down Chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from the frames).
Taking down Chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames).
M&L for preparation of new steel surfaces over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel painting over a coat of red oxide primer etc all as specified and directed.
M & L for preparation of new or previously untreated wood or wood based surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint (approved tint) over a coat of pink primer complete as specified and directed.
S & F factory made 35 mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated incl one shop coat of pink primer all as specified and directed.
M&L for 2nd class hard wood factory made 35mm thick glazed /gauzed and skelton shutters, open rebated and prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters specified in SSR Part I, Section 8 , Clause 8.24(a) all as specified and directed.
M&L PCC 1:3:6 type C1 (20mm gr agg) as in anchoring hold fast, bed plate etc all as specified and directed.
S&F stainless steel butt hinges 100mm long medium weight etc complete all as specified and directed.
S &F aluminum anodised handle 150 mm long cast type complete all as specified & directed.
S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed
S&F 300 mm long aluminum, anodized barrel sliding bolts of extruded section complete all as specified & directed.
S&F mild steel 300mm ordinary rat tail rod pattern spring including roller plate, complete all as specified.
S&F floor door stopper 140 mm of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor.
(Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specfied & directed.
Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in box of 1.6 mm thick including one coat of synthetic enmelled black paint and providing with brass screws and cup washers including single core multi stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :-(a) One light/fan/bell point controlled by one way switch 5 amps.
(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.
(c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.
Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade conforming to IS:694 in new metal flush box of 1.6 mm thick including one coat of syenthetic enamelled black paint with new modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core multi stranded FRLS copper conductor 1.5Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15A Indepentent board
S&F of switch pian type 5 amps single pole one way complete all as specified and directed.
S&F of switch piano type 15 amps single pole one way complete all as specified and directed.
S&F of socket outlet multipurpose 2/3 pin 5 amps flush button type complete all as specified and directed.
S&F of socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed.
S&F of ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan including connections complete all as specified and directed.
Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed.
Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and depositto MES store to store complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods,remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs all as specified. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
S&F in of MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed.
S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.
S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed.
Supply and fixing LED Building security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.
S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.
S&F of single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.
M&L far Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.
Supply and fix exhaust fan 300 mm sweep with blade and frame including louvers complete all as specified and directed.
Supply and fix Fresh Air fan 250 mm sweep with blade and frame complete all as specified and directed. Make Bajaj/Crompton/Havells/Usha
S & F of Lamp holder,PVC /Polycarbonete type with back plate suitable for batten fittings with connections complete all as specified and directed
S&F of LED bulb of 9 watt complete all as specified and directed.
S&F replacement of flat panel aesthetically designed 2x2 LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination 34 watt complete all as specified and directed.
S&F of factory made epoxy polyster powder coated distri bution board SP & N 4 Way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar. Neutral bar,standard DIN rail, earth bar and cable ties for cable management, top one DP MCB as incomer and 6 SP MCBs at outgoing complete all as above DB all as specified and directed. NOTE:- (a) MCBs shall be measured and paid separately. (b) All cable terminating into MCBs shall be connected by using suitable copper lugs/sleeves and it cost shall be deemed to be included under respective item of sch"
Deduct Credit: for demolished/dismantled material of (-) Rs 0.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum
M/S Ayub Khan
JAIPAL AND BROTHERS
M/S Parshant Associates
Kunal Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .