REPAIR/MAINT OF LED STREET LIGHTS, PANELS AND CONNECTED ITEMS AND ALLIED WORKS AT SIRSA CAMP AREA AT ARMY STN KATIHAR UNDER GE AF PURNEA

Amount

Taking down care fully defective light fitting such as Street light, security light, (any type and any size), Flood light, LED light any type, from any location mounted on any type of poles/bldgs/ tower/ high mast of height up to 20 mtr from bracket after disconnecting of supply cable for replacement of fittings complete all as specified and as directed. Note :- Any T&P required for the work should be arranged by contractor.

Taking out old unserviceable PCC poles of any length from Soil and taking it to MES stores/Contractor workshop complete all as specified & as directed.

S&F steel tubular swaged poles, type 410 SP-31 (9.0 metre long) complete with cast iron base plate, finial taper plug, bolts, nuts and washers conforming to the details given in fig. 3 and 4 of the standard (I.S. 2713 Part 1 to 3-1980) including painting the outside surface of the pole with two coats of aluminium paint over a coat of red-oxide primer and black/white strips up to 1.5 m height after necessary preparation to surfaces complete all as specified and as directed.

S&F 72 watt LED street light luminare with high power LED, with peanut lens to ensure uniform light distribution, powder coated pressure die cast aluminium with heat resistant toughned glass with lens and potel driver, seprate surge protection, necessary wiring IP 66 protection including making all electrical connection from light fitting to pole junction box/ O/H line for making the light functional, complete all as specified and as directed. Make : Philips Cat Part No- BRP410 LED CW 072 MR FG S1 PSU GR Notes:- (i) If connection.cable from pole Juction box to street light and street light bracket is required to be replace it shall be measured and paid seperately under respective items. (ii) At location where street lights/flood light are connected through overhead conductor, connection cable from light fitting to overhead conductor is deemed to be incl in the item rate. (iii) All LED street light/flood lights shall be properly connected with earth dolly provided with fittings and steel poles. (iv) All LED lights have replacement warranty of 3 years from the date of completion of the contract. Contractor has to submitt warranty certificate from manufacturer . Payment of light fitting will be released after receiving of 3 year replacement warranty certificate. (v) The LED lights will replaced by the contractor free of cost in the case of manufacturing defects and Failure due to electrical impact (vi) The contractor shall submit the surge protection certificate and Type test certificate LM 79, LM 80 for luminaries. (vii) All LED fitting shall be identified by printing or fixing stickers duly mentioned the C.A number and date of completion. (viii) For any change in product or change in catalogue No. etc due to technological upgradation, letter has to be obtained from the lighting company on their letter head signed by an offical of National level. (ix) All T& P required at site for installation of light on Pole / Bldg /Tower or at any location shall be arranged by contractor

M&L for G.I (medium grade, ISI ) pipe 40 mm dia, 1.5 Mtr long medium grade, bend to shape for street light fittings bracket, with two nos of MS clamps of suitable length of size 40 mm x 5 mm of MS flat iron with nuts, bolts & washer including applying two coats synthetic enamel aluminium paint over a coat of red-oxide primer and including taking out old unserviceable ones, complete all as specified and as directed.

S&F weather proof junction box made of thermoplastic polycarbonate with gasket comply with -IP 66,dust and jet water proof of size 155x210x92 mm (with Knockouts for cable entry) including with terminals, for cable size upto 10 to 16 sqmm alongwith cable inlet including a pairs of MS flat iron clamp of size 40mmx5mm with 10mm nuts, bolts of suitable length with washer, including 2 coats of synthetic enamel aluminium paint(first grade) over a coat or red oxide primer suitable to fix in steel tubular pole/PCC pole, including taking out/dismantaling existing unserviceable junction box of any type and size, disconnection of existing cable connection and reconnection of cable by providing suitable size cable lugs & gland, complete all as specifid and as directed. Make : Hensel Cat Part No- KF 1616 G

S&F cable PVC insulated flexible type 2.5 sqmm x 3 core copper conductor cable including taking out old and unserviceable cable from juction box to street light fiting, complete all as specifid and as directed.

Supply and fixing for decorative LED post top fittings decorative post top for 360 degree indirect light with IP 65 protection including with all accessories complete along with GI pipe of 40mm dia(light grade) of 0.3m length shall be flixed on the post top lantern incl all necessary PCC works (PCC 1:2:4 type B1 using 20mm graded sotne aggregate) including taking down old unserviceable ones, complete all specified and as directed. Make: Cat Part No LPTO-40-CDL of Crompton or equivallent in Philips/Bajaj

Supply and fixing garden light fitting with inverted pyramid type LED bollard with soft 365° light 10 watts IP 65 and including foundation for the fittings shall be of sizes 250x250x300mm with PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) including taking down old fitting, demoliton of brick/PCC work complete all as specified and as directed. Make: Cat Part No LBLSN-10-CDL of Crompton greaves or equivalent in Philips/Bajaj

S&F in repairs sheet metal enclosure for MCB, DB, SPN, 240 Volts, without busbar, Confirming to IS as per IEC 61439-3, 2 way single door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including fixing the DB box flush in wall of any type and making good the distrubed surface to match as the existing with complete all as specified and as directed.

Taking out old unserviceable LT cables of any sizes & type from the trenches or pipe etc including taking out brick if required, complete all as specified and as directed. Note:- Excavation in trenches shall be measured & paid separately under relevant items and serviceable bricks reused under relevants items.

Supply, Laying, commissioning and testing of UG LT cable XLPE insulated screened PVC bedded, galvanized steel strip armored, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 x 4 core including connecting the cables at both ends by providing suitable size aluminium lugs & glands at the termination ends, complete all as specified and as directed.

Excavation in trenches in any type of soil not exceeding 1.5 mtr wide and n.exe 1.5 mtr depth in foundation of pole/ laying of under ground cable and including getting out of any type of soft/loose soil, complete all as specified and as directed.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil, complete all as specified and as directed.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point, complete all as specified and as directed.

M&L sand covering /cushioning for under ground cable protection in-trenches with clean dry sand unwashed including gently pruning around cables complete all as specified and as directed Note:-Punned thickness to be measured for payment.

Material and labour for burnt bricks sub class 'B laid flat in trenches over sand cushioning for cable protection complete all as specified and as directed.

Reuse of old serviceable bricks obtained from relevent Item Ser No 11 laid in trenches above sand cushioning for cable protection complete all as specified and as directed.

Horizontal boring for passing GI protection pipe up to 80 mm bore (dia), under road / foot path, not exc. 10.00 metre in a single length, complete all as specified and as directed.

M&L for cutting the road/hard standing and making good disturbed surface by using PCC type C2 (1:3:6) by using 20 graded stone aggregate for the fixing the pipe complete all as specified and as directed.

M&L for laying 15 mm bore GI pipe, light grade with all fittings, from junction box to street light fitting to carry connection wire, including necessary clamping etc. including taking down old unserviceable ones, complete all as specified and as directed.

M&L for laying 50 mm bore GI pipe, light grade with all fittings for protection of UG Cable, laid in floors/road crossing/path and in pole up to junction box including necessary clamping with nuts, bolts & washers etc. including taking down old unserviceable ones, complete all as specified and as directed. Notes : (i) Cutting/Boring under road/path will be measured and paid under respective item. (ii) The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quoted amount.

M/s. Rakesh Roshan