ADDN/ ALTN TO BLDG NO T-114, T-136 AND T-312 AT 1 AFSR AND PROVN OF CERTAIN E/M AND B/R WORKS SERVICES AT AFNET SECTION AT AF STN PALAM UNDER GE (AF) PALAM, DELHI CANTT-10

Amount

Taking down chowkhat or frame with shutters (without taking off shutter from the frame) area n exc. 1.5 sqm each complete all as specified and as directed.

Description all as per ser item No. 1.00 above but area exceeding 1.5 Sqm but not exc 4.00 Sqm complete all as specified and as directed.

Taking down shutter of any description exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and as directed.

Demolition of concrete in ground floor and pavings n.exc 15 cm thickness below or above ground level complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any dscription not otherwise provided for complete all as specified and as directed.

M & L for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel,slab,chaja pardi, railing etc, cleaning thoroughly exposed reinforcement, by sand blasting using suitable pump as directed by the GE, preparing exposed concrete surfaces to receive guniting, applying one coat of anti corrosive paint to the exposed reinforcement, supply and fix welded wire mesh of size (100 x 100) mm of 3 mm dia wire, weight not less than 1.37 Kg/Sqm & binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying pressure guniting in cement mortar (1:3), average 30mm to 50mm thickness and thereafter rendering 10 mm thick plaster in cement mortar (1:3), mixed with water proofing compound @2% by weight of cement and finishing the surfaces even and smooth without using extra cement to match with the existing surfaces, removing the debris outside MoD land including material and labour for necessary scaffolding and formwork (G+3 storeys) and safety arrangement for guniting work complete all as specified and as directed. (Note:- The finish of the surfaces to be matched with the existing surface. WPC shall be measured & paid separately as supply only).

Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceilings, surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), surface finished even and smooth without using extra cement including necessary scaffolding up to 6m height complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4), surface finished even and fair with water proofing compound by weight as per manufacturer's instructions including necessary scaffolding up to 6m height complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

S&F factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and as directed.

Supply and fixing for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framed work as in doors or gates of angle or other section gates of with gusset plates, rails, cladding, chowkhats/frame or like etc welding hold fast, hinges complete all as specified and as directed.

S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with top hung shutters including hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

M&L for cutting holes in brick walls, built in cement mortar or cement lime mortar, exc half brick but not exc one brick thick, for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 complete all as specified and as directed.

S&F clamps; hold fast; bands, straps, supports or stays for galvanised plain mild steel wire including bolts, rainwater, ventilating pipe and simillar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F butt hinges, stainless steel, ISI Marked 100mm size complete all as specified and as directed.

S&F MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts of extruded section length of bolt 150mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified.

S&F extruded aluminium alloy handles, fabricated type, 100 mm size complete all as specified and as directed.

S&F aluminium sliding door bolt, 250 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F 19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup boards, shelves and pelmet boxes etc and including dismantling boarding any description fixed with screws complete all as specified and as directed.

Demolition of mud in roofs, any thickness, including plastering, brick tiles, concrete and leeping (whether full thickness removed or only a part there of) complete all as specified and as directed.

Demolition of reinforced concrete roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

M&L for providing reinforced cement concrete nominal mix (1:2:4) type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specified and as directed.

M&L for TMT or deformed bar 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire(annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Description all as per item No. 33.00 above but 6 to 8mm dia bars as in stirrup complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and as directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thicknes in floors, aprons etc complete all as specified and as directed.

M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n. exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surfaces of size (300x200)mm x 7mm thick / (450x300)mm x 7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete with and including laid over 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Description all as per ser item No. 39.00 above but as in riser of steps, skirting, dado etc with and including over 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Supply only Integral Water Proofing compound complete all as specified and as directed.

M&L for preparing plastered or unplastered new surfaces as on ceilings including brooming down or steel wire brushing, scraping down and applying three coats of white wash complete all as specified and as directed.

M&L for preparing old surfaces as on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specified and as directed.

M&L for preparing plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of alkali resistant primer complete all as specified and as directed.

M&L for complete removal of existing treatment of old plastered surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of new plastered surface of walls, chajjas, soffits & beam including necessary scaffolding and applying two coats of cement base paint over one coat of chalk whiting primer complete all as specified and as directed.

M&L for complete removal of existing surface of walls, chajjas, soffits & beam including necessary scaffolding and applying two coats of cement base paint over one coat of chalkwhiting primer complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for provision of 2mm thick cement base wall care putty on walls for smooth finish complete all as specified and as directed.

M&L for provision 2mm thick wall care putty applying on ceiling for smooth finish complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) Type C2 using (40mm graded stone aggregate) as in plinth protection and paving with even and smooth finished, without using extra cement and making 10mm wide groove at every 1.50m and at junction & filled with lean morter complete all as specified

M&L for providing cement concrete (1:2:4), type B-0, (using 12.5mm graded stone aggregate) as in roof padding to maintain slope etc complete all as specified and as directed.

M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Plastering 10mm thick in cement mortar (1:4) on concrete surfaces using WPC @3% by weight of cement, surface finished even and smooth (b) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane shall normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrata & the over laps are then scaled/fused by flame.

M&L for cement concrete tiles of size (20cm x 20cm) x 20mm thick machine pressed, set & pointed in neat cement slurry in floor with grey cement and no pigment and cut and polished on roof over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

Taking up or down 15mm steel tubing, bore of pipe in 15mm and connections in walls, ceilings, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.

M&L for GI tubing, 15mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Dismantling water tanks exc 500 & n exc 1000 capacity in litres and removing to store complete all as specified and as directed.

S&F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), three layered, white, hoisted and fixed in position complete all as specified and as directed.

S&F 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), three layered, white, hoisted and fixed in position complete all as specified and as directed.

S&F ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F gunmetal globe or gate valves, 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Taking down CI pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.

Taking down CI pipes of 75/80mm dia of any description including all fittings complete all as specified and as directed.

S&F 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls including suitable iron clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and as directed.

S&F 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall including suitable steel clamps after every one mtr of interval complete all as specified and as directed.

S&F CI 100mm bends with door complete all as specified and as directed.

S&F CI 100mm single branch piece with door complete all as specified and as directed.

S&F CI 75mm bends with door complete all as specified and as directed.

S&F cast iron cowls 100 mm size complete all as specified and as directed.

S&F in repairs for cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified and as directed.

S&F in repairs for Cast Iron `P' Trap 100mm bore complete all as specified and as directed.

S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size (580 X 440)mm white with integral foot rests, including connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, including flush pipe all fittings etc complete all as specified and as directed.

Supply and fixing in repairs low level flushing cistern 10 ltrs capacity, and connections to pipes and fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, white, with inlet, including brackets complete all as specified and as directed.

S&F in repairs vitreous china ware wash hand basin, white, flat back of size (550 x 400)mm including brackets, cutting for and pinning in ends of brackets or erecting stand including brass CP union/waste fitting of 32mm dia and discharge pipe of 32mm dia PVC of 1.0 m length including one CP pillar tap cast copper alloy with all fittings etc complete all as specified and as directed.

S&F in repairs vitreous china urinals half stall type white or coloured with grating and union for discharge pipe etc complete all as specified and as directed.

S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and as directed.

S&F mild steel work (FE 290 Grade E-165) roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to fix the wall fixed with self taping scrows complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F in repairs stop valve (half turn)15 mm dia cast copper alloy chromium plated fancy type high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed complete all as specified and as directed.

S&F in repairs bib tap (half turn)15 mm dia cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F pillar tap (half turn) 15 mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:4:8) type D2, (using 40 mm graded stone aggregate) as in sub base, surface finished even and fair complete including necessary use and waste of form work complete all as specified and as directed.

S&F machine pressed precast concrete interlocking paver block any shape and size, with grey cement and pigment to match, conforming to IS 15658-2006 of 60mm thick M-35 grade with and including laid over 50 mm thick sand cushioning complete all as specified and as directed.

M&L for Durastone heavy duty tiles of size (600x600)mm x 10mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the colour of the tiles, over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and as directed.

Providing & fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum false ceiling tiles of size 595mm x 595 mm of approved texture, design and patterns having moisture content less than 2% , humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, non combustible as per BS 476 (PART 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size (15x32) mm of length 3000mm, cross-T of size (15x32) mm of length 1200 mm and secondary intermediate cross -T of size (15x32) mm of length 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size (85x25x2)mm, Galvanised iron perimeter wall angle of size (24x24x0.40)mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as specified and as directed.

Removing demolished materials etc (other than spoil) to a distance exc 1.00 KM and n exc 1.50 KM including loading, unloading and stacking etc. complete all as specified and as directed.

Excavation in post holes (or similar holes) not exc. 0.50 Cum each in soft/loose soil and getting out returning, filling in and removing surplus spoil out of MOD land and making good the surfaces complete all as specified and as directed.

M&L for rolled mild steel work as in tubular trusses purlin, rafter etc (Square/ rectangular/ round hollow pipe) including special shaped washer etc complete using ERW or induction butt weld tubes conforming to IS : 1161-1979 St 240 fixed with angle cleats or other connectiong plates etc all necessary welding, bending, drilling holes etc for shed as approved pattern shed complete all as specified and as directed.

M&L for rolled mild steel work as in tubular post, column etc square/ rectangular/ round hollow pipe) including special shaped washer etc complete using ERW or induction butt weldd tubes conforming to IS : 1161-1979 fixed with angle cleats or other connectiong plates etc all including all necessary welding, bending, drilling holes etc for shed as approved pattern shed complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete, etc. and for fixing posts complete all as specified and as directed.

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5m in depth; for foundtion, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 Sqm on plan and n. exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceedng 25cm thick complete all as specified and as directed.

Removal of excavated material to a distance exc 100 m and n exc 150 m and depositing where directed at a level n exc 1.50m above the starting point complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straigth or curved on plain exc 6m mean radius built in cement mortar (1:4) complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, bed plates, wall through and the like including weathering slightly rounded or chamfered angles and threading complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work/concrete surfaces complete all as specified and as directed.

Supply and fixing in repairs, SFRC drain cover size1000mm x 500mm x 70mm thick laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE.

M&L for reinforced cement concrete (1:1.5:3) type A-1 (using 20 mm graded stone aggrigate) as in slab supported on wall, beams and columns, balconies, canopy, deck slabs and similar work complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for hardcore gauge n.exc 63mm of broken stone or boulders deposited, spread and levelled in layers n.exc 75mm thick, watered and well rammed to a true surface complete all as specified and as directed.

M&L for 100mm thick cement concret (1:4:8) type D-2, (using 40mm graded stone agreegate) as in hardstanding complete all as specified and as directed.

M&L for factory made pressed precast concerete interlocking tiles any shape and size confirming to IS 15658-2006 with grey cement and pigment 80mm thick M 40 grade with andd including laid over 30mm thick sand layer complete all as specified and as directed.

Dismantling of existing roof tiles/roof treatment including roof plaster of any thickness and removing the rubbish from MoD land complete all as specified and as directed by Engr-in charge.

M&L for 15mm thick cement plastering by using CM (1:4) on brick/concrete surfaces of roof and parapet, mixed with liquid water proofing compound, finished even and smooth without using extra cement (including 4 Storey building) complete all as specified and as directed by Engineer-in-Charge. Note:- Water proofing compound shall be measured & paid separately.

Supply only liquid water proofing compound complete all as specified and as directed

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coving/coping, benching, bed block for water tank, window cills etc complete all as specified and as directed.

M&L for preparing new plastered wall surface and applying two coats of exterior emulsion paint 100% acrylic of approved colour over a coat of primer and over 2 mm thick cement base wall care putty including necessary scaffolding upto 4th storey complete all as specified and as directed.

M&L for preparing new plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of cement primer complete over 2mm thick cement base wall care putty complete all as specified and as directed.

M&L for complete removal of existing treatment and preparing old plastered surface of walls applying two coats of distemper oil emulsion over a coat of primer over 2mm thick cement base wall care putty complete all as specified and as directed.

M&L for preparation of old treated surfaces of wall and applying one coat of exterior emulsion paint (weather proof and Dust Proof ) over 2mm thick cement base wall care putty complete all as specified and as directed.

M&L for GI tubing, 15mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F aluminium colour powder coated/anodised door frame and shutter single or double leaf glazed/pre laminated particle board interior panels fabricated including aluminium powder coated beading, rubber gasket and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Door frame section (101.60 x 44.45 x 1.93) mm fixed as per specified (b) Door shutter vertical style of size (85 x 44.45 x 2)mm as per specified. (c) Door Shutter Top style section (95.25 x 44.45 x 2.00)mm as per specified. (d) Aluminium coloured powder coated middle lock rail/bottom rail section (150 x 44.45 x 1.93) mm cat No.20002. (e) Aluminium coloured powder coated Tower Bolt 02 Nos in each shutter 200 mm long as specified. (f) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long as per specified. (g) Door Floor spring ISI Marked Make-Sandhu, Amar or equivalent. (h) Six lever mortice lock brass on in each door. (j) 12 mm thick particle board (pre laminated both face) exterior grade ISI Marked (k) Tinted glass/Plain glass(Colour) 5mm thick.

M&L for granite (any type) slab 20mm thick bedded in floor /wall and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with and including laid over 15 mm thick CM (1:4) complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. any type complete all as specified and as directed.

Taking down ceiling fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades to store yard and hanging ceiling fan in its original position or any other position including as per direction of Engineer-in-Charge including its fittings and fixtures after carrying out the repairs i.e cleaning, rewiding, greasing and filling, replacement of bearings, painting of fan with one coat of synthetic enamel paint by spraying after preparation of surface by cleaning all dust and filling cavity with filler, reassembling the fan etc including testing complete all as specified and as directed.

Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.

M & L for point wiring with single core PVC insulated unsheathed 1.5 Sqmm FRLSH multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories suitable for mounting modular switches including modular metal flush box and modular face plate with frame for mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulated but unsheathed multistranded copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly in concealed wiring system includes cutting of chases and making good disturbed surfaces complete all as specified and as directed for the following :- (a) One light/fan point controlled by one switch one way

(b) One 3 pin 5Amps socket out let point on the same board controlled by one switch complete all as specified and as directed.

(c) One socket outlet 5 Amp controlled by one switch on independent board complete all as specified and as directed.

All as per Srl item No 124.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete all as specified and as directed.

M&L modular switch 1 way 6 Amps 1 module complete all as specified and as directed.

M&L modular switch 1 way 16 Amps 1 module complete all as specified and as directed.

M&L modular socket outlet 6A, 2/3 pin combined 2 module complete all as specified and as directed.

M&L modular socket outlet 6A/16A, 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fixing ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed.

Supply and fixing step regulator modular type, 120W - 2 module complete all as specified and as directed.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250mm complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F sheet steel enclosures for MCB distribution board SPN 8 way 240Volt with 200 Amps bus bar, neutral link, earth bar din rail conforms IS-8822:96 and EIC 898-96, double door complete all as specified and as directed.

Supply and fixing MCB, SPN, 40-63 Amp ,15 kA breaking capacity complete all as specified and as directed.

Supply and fixing MCB, SPN, 32Amp,10 kA breaking capacity complete all as specified and as directed.

Supply and fixing MCB, SP, 5-32Amp,10 kA breaking capacity complete all as specified and as directed.

Material and labour for submain wiring with two single core 4.00 sq mm PVC insulated FRLSH multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 2.5.00 Sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed.

All as per srl item No. 142.00 here in above but for 6.00 sqmm main wire and 6.0 sqmm earth wire complete all as specified and as directed. Note for Srl item No. 141.00 & 142.00:- Two main wire, one earth wire, PVC conduit and cutting chases shall be deemed to be included in unit rate of one run.

Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fixing in replacement of metal plug and socket with MCB and steel enclosure of capacity 20 Amp, SPN, MCB metallic complete all as specified and as directed.

Supply and laying XLPE LT 1100 Volt grade, armoured under ground cable size of 16 Sqmm 2 core with stranded aluminium conductor in trenches /passing through pipes/ on poles etc with and including necessary excavation, earth work and protection of cable complele all as specified and as directed.

Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessorries such as safety valve, thermostate, NRV, connection pipe etc complete all as specified and as directed.

L G BUILDERS (BID ID -3103768)

RK TRADERS (BID ID -3112558)

Shiv Shankar Nirman Co. (BID ID -3112656)

VIJAY KUMAR GUPTA (BID ID -3113963)

M/s Navansh Engineers & Consultants (BID ID -3099713)

M/S GEETANJALI ENTERPRISES (BID ID -3113765)

M/S Parshant Associates (BID ID -3114017)